asdasdasd
Assistance request - Net Label different between Schematic and PCB
I've been looking at the schematic and PCB for my workbench project and in about a number of places the net labels on the schematic and the PCB layout footprints differ. I'm hoping it's just because I've been staring at this too long and can't see the obvious glaring error. A copy of the project is HERE. As you can see on header HPWRB, the net label on pins 19 & 20 are different on the PCB (12VL) to the schematic (Neg12VL). I have traced the tracks for 2 days and cannot see any misconnected tracks or tracks with conflicting labels. I have gone overboard with labelling the tracks to try to see where the issue might be, but it hasn't helped. In other places my 5V and 5VM net labels, and GND and GNDL and GNDM net labels are incorrect as well. If someone could run their eyes over it and see if there simply an error that I haven't seen it would be appreciated. Thanks Braedon Townsville, Australia #PCB#
bungo 2016-06-28 17:46:46 comment 23 0 Circuit Design
PCB layout for non-recrangular panels
I have a PCB that can be viewed here -> (https://easyeda.com/editor#id=560Uc60iA) Trying to make it so that I can break up a large panel into smaller components, and I read this post (https://easyeda.com/forum/topic/Creating_Breakouts-qmVvtPcoY), but am not sure I understand what you mean by "overlap". The way I have made the board edges they have zero overlap (they sit on top of each other), but are not totally rectangular or a repeating grid. The system still complains that EasyEDA dose not allow inner board outlines cut-out, please use SolidRegion or HOLE. What do I need to do to be compliant so I can break down the larger manufactured board into smaller sub-boards. From the forum article above on Breakout Boards, do you mean a 2mm gap between the boards (lots of individual boards separated by 2mm), or do you mean 2mm the other way where the board outlines interfere with each other by 2mm with the location of the V-cut being the mid point between the 2 boards edges??. Either way I'm not exactly rectangular or a regular grid as specified in the forum post, so I may need some guidance on how to lay to lay this out in the PCB Editor so that the PCB output can be compatable with the fabrication process. An example would be nice so I can reverse engineer it. I have a version that has NPTH cutouts as long perforations between the boards with joins spread periodically so it can be manufactured as one board and I can cut through the joins, but that seems like a lot if bother to do it that way and rather traumatic for the PCB when I cut them out. (Small Note: In the Warning popup message, "dose" should be "does" and SolidRegion should have a space between the words) cheers and thanks in advance. Braedon King Townsville, Australia #PCB#
bungo 2016-06-22 14:47:00 comment 17 0 Circuit Design
Ability to move multiple tracks and text in PCB designer, and weld track points together.
Feature Request Ability to move multiple tracks and text in PCB designer. Currently I can highlight multiple text and tracks in the PCB designer using ctrl+left-click, but I have to add a hole or some other component to the design to grab a hold of to be able to move them as a unit. If I don't, it selects the track/text I use to drag with and only moves that track or point. The other option is to cut and past the entire group of selected objects, or make a group out of them and then un-group them, but this does not always work as expected and both options add unneeded complexity to the process. The ability to weld tracks together into one rather than delete and redraw would be nice too, especially for document layers when trying to move or reshape designs made out of lines/tracks or change a shape created from lines at the point where it starts and stops (usually the same place, but 2 different track points that could be welded together and move as one. Regards Braedon King Townsville, Australia #FeatureRequests#
bungo 2016-06-17 09:41:13 comment 3 0 Feature Requests
Disable Snap to other objects/layers so that the grid takes precedence
Feature Request Ability to turn off snap to hidden objects/layers, or disable snapping to tracks/objects on a different layer that aren't connected to the current layer (ie it's not an all layers thing). Having to fight the other layers to get track point/object to snap to the grid is a pain. Regards Braedon King Townsville, Australia #FeatureRequests#
bungo 2016-06-17 09:28:50 comment 12 0 Feature Requests
Autorouter/Copper Areas tracks and copper through drill holes that have pads on only the opposite side
BUG Concise problem statement: The Autorouter does not seem to see holes from solder pads that are on one side of the board and routes tracks on the other side through them. The Copper area also does not recognise and keep clear the holes and a space around them if it is on the other face of the PCB to the pads with drill holes. Steps to reproduce bug: Make a component with solder pads with drill holes with the solder pads on one side of the board only (ie a 30 pin DIP socket), and other components that also have solder pads only on the same side of the PCB. place some components (close to the DIP socket that have no other path than to cross over tracks (using a via to the other side of the PCB). Autoroute. The router will usually take a path straight through the DIP socket's holes but on the other side of the PCB to the solder pads. NB: Try this with a copper area covering a PCB on the opposite side to components with solder pads with drill holes on only one side of the PCB. Results: Copper areas are solid through holes (and needless to say) don't provide clearance with those holes on the reverse side. Expected results: Routes (and copper areas) avoid and have the same clearance from the holes as specified in the autoroute/copper area clearance parameters. Browser: Google Chrome and Firefox 40+ #BugReports#
bungo 2016-02-07 18:48:05 comment 8 0 Bug Reports