$15 Surcharge for Panelization
I received a customer-service message yesterday, requiring an additional $15 for an order that I had just placed. You need to pay additional for your order. 1.There are too many small slots in your file , it will take too much time to get it finished during the routing process. Following up with JLCPCB chat/support has not clarified the issue either. But apparently the "slots" are the spaces in the 2X5 panelization (which was created in EASYEDA), and "if there are too many slots, we might also charge you a milling fee." Can someone explain the issue here, and what I can do to prevent this in the future? The red-arrows below are what the JLCPCB support agent pointed out. It's extremely frustrating to have this surcharge added after my order is placed, knowing that the entire order (including other boards) will also be put on-hold until I pay hidden costs. #PCB#
Component Pricing Inconsistency
I'm having another issue, this time relating to a recent component pricing. In EASYEDA, C9864 is priced as $2.41 (per LCSC Electronics). However, we all know we have to check JLCPCB SMT Part Library, to actually check if items are available for SMT assembly. In JLCPCB SMT Part Library, C9864 is a basic part, listed at $1.82 (and also in-stock). I selected this component for SMT assembly (and then designed m board around this component). When completed, I exported the Gerber, BOM and PickAndPlace. The exported BOM now lists this compent as $0.61. However, when I uploaded the entire project for manufacturing--I got charged $4.45 for each C9864. Obviously at that point, I simply had to pay the inflated price, as I had already designed the my board around this component (and all the supporting components)--and had sunk countless hours into the project. I did attempt to contact customer support, but only got a generic "JLCPCB and LCSC are sister companies." I also am aware that the market is fluctuating. However, is there any way for us to know what we're actually going to get charged for a compent, before we spend countless hours designing a project? Instead of only knowing at the last minute, when we submit for manufacturing? Had I known that the cost of this component is substantially higher than listed, I would have considered the other options (during my initial search of JLCPCB SMT Part Library). Unfortunately, this is the 2nd major issue I've encounter in this single order (a single order that has several separate projects/PCBs)--the first issue is two additional $15 surcharges ($30 total) for two separate panelizations (panelizations that do follow all of the posted guidelines). And I only got hit with the surcharge AFTER I had submitted (and paid) for the order. Now everything else in that single order is on-hold until I figure out how to deal with the $15 surcharges. Needless to say, this has been rather frustrating--especially to see up-charges and surcharges AFTER I've placed an order (or AFTER I've spent countless hours developing a board). #PCB#
V-Cut Capabilities
Seems I occasionally get tripped-up panelization and v-cut. Are the capabilities for v-cut defined somewhere, especially as it relates to panelization? Min total board-size, and min size for each specific board (in the panel)? Are there different rules for when SMT assembly is involved? #PCB#
Min PCB Dimensions for V-Cut Panelization
Is there a minimum PCB dimension (non-SMT) for V-Cut panelization? I recently submitted a small rectangular PCB (10mm x 22mm) that I panelized (in EASYEDA) for V-cut (5 columns, 3 rows). After submitting (and paying), I got this message: An additional charge is applied to Y98-2263294A 2021-02-18 23:59:43 1.The size for your pcb is too small( less than 15mm per side), it will take a very long time and have much more difficulties to carry out the v-cut process. The total board (panelized) was 50mm x 66mm. I wasn't aware that there were any minimum sizes for V-Cuts. Any insight into what I may have done wrong here? BTW: the original order (above) is in-production (after a few rounds of correspondence and selecting "panelized by JLCPCB"). I'm really just asking what I should have done differently to avoid this in the future. I really would like to be able to "panelize by customer". #PCB#
Expected Re-Stock Dates for SMT--Power Inductor
I know this has been request previously, but when will we have a sense of how long 'out-of-stock' items will be restocked for SMT production? Prior response to this question was "new features are coming with the new facility in early OCT." Several months ago, I had to recently redesign a project because the original 47uH inductor (C143967) was out of stock (and has now been out-of-stock for awhile). I replaced with a different version (C169398) that I was able to run a few tests with--but now that is also out-of-stock (and I now have an order suspended until I redesign). I could possibly consider a third 47uH inductor (C169387)--but it only has 47 in-stock, and a 4th option only has about 900 in-stock (which I would presume will soon run out). Some of these options have different footprints, so require an entire re-design of the PCB each time there's a change. I feel like I'm rummaging through the bottom of the barrel right now... 1) Is there any sense when we will have the information that will tell us when items are expected to be re-stocked? 2) Is there any way we can request to have items stocked (or check to see which version is the preferred item to be consistently stocked)? #PCB#
DRC-Incomplete Connection-GND
Really stumped on why I'm repeatedly getting a DRC error on my GND connections. The bottom layer has a full copper layer with GND net, and everything appears properly grounded. I'm missing something obvious, but I just can't figure it out. https://easyeda.com/editor#id=|b364f92f65ee4c9d8ad9eb24be1cbe0f|5d9565d152b94391a4f7ca6508c6a931 #PCB#
Allow "Reorder" By Others
One feature I like about the JLCPCB ordering, is that it keeps your prior orders in your account, so it's an easy click if you need to reorder. What would be great (or maybe I'm missing it), is if I could have an order# that I could give to other people, and THEY can order as many of the boards as they want. I know I can share my work in EASYEDA. But I don't want people my file, messing with my design. And not everyone would know how to quickly generate an order for themselves from EASYEDA (they just want the board, not all the details behind it). It would be great if I could just link them the order number, and they could simply order the board themselves. Is there already a way to do this that I missed? #PCB#
PCB Thickness vs Copper Thickness
If designing a board and using the standard PCB thickness (1.6 mm), this value is NOT the thickness (Thickness=1.6 mm) that one would input when calculating the trace-width (such as https://www.4pcb.com/trace-width-calculator.html)? The thickness value on the trace-width calculator would be 1 or 2 oz/ft^2 (the only two options when ordering from LCSC)? #GeneralDiscuss#
Socket-able Items
New to easyeda, and I've not been able to figure out the best way to handle socket-able items (fuse holders, IC-chips with DIP sockets, etc.), so that the component (fuse, IC) AND the socket (fuse holder, DIP sockets) both appear in the BOM. Do I put both the fuse AND fuse-holder in the schematic, but set the actual fuse to Mounted=NO (thus not appearing in the PCB)? However, when I looked at how Mounted is to be used, it didn't seem to fit this scenario. What's the best approach here? #Skill#