asdasdasd
Very few if any part from library meets standardization
I am trying to place a TL431 sot23, and despite significant stock held to buy , and the part meeting its sot 23 status , the part then does not meet standardization for the schematic editor, and then creates havoc if a pcb is then proceeded with. Needless to say it creates design rule error. This wastes so much time and makes the part unattractive to purchase. The image shows more than 88,000 available, yet few will sell because they cannot be placed. What needs to occur is no parts should be available to place into a schematic , if they do not meet standardization, thereby clarifying only parts that can. Or clarifying that the standardization aspect is relaxed to make only parts that can be placed then always matching the supplier part. #Schematic#
cdrhd1500 2025-06-15 08:54:22 comment 4 0 Circuit Design
Solution for plated holes suiting Dueland wire or other
This part is not easy to find. It is so good I have asked it to be promoted as part of the Common library as with it, you can, via its footprint, have a 3mm plated hole for securing wire to, like Dueland that is quite popular, but also via its actual available part, ability to secure circuit boards to enclosures. https://www.lcsc.com/datasheet/lcsc_datasheet_2410121449_Sinhoo-SMTSO2066CTJ_C2916353.pdf It is already part of the Easy EDA library https://www.lcsc.com/product-detail/Patch-round-nut_Sinhoo-SMTSO2066CTJ_C2916353.html I hope you find it useful. #PCB#
cdrhd1500 2025-04-28 17:38:52 comment 1 0 Circuit Design
Red dot difficulties, is there a secret ?
This might be a double post, but I could not see my prior comment from about an hour ago My problem is the red dot, that seems to haphazardly connect on some junctions, and totally refuses to connect on others. It does not appear in Place as a part, so should occur when the mouse click finishes, but it does not occur correctly as it should. I have tried in the example of a simple 5mm pitch connector block to connect the 2nd junction over 170 times Perhaps if it can be explained why, might be helpful, if others are similarly stuck unable to proceed to pcb design, seemingly forever correcting errors that the program appears to be making I have even tried copying the red dot, and pasting it, but that does not work either. What is the secret in getting red dots reliably on all junctions please Thank you #Schematic#
cdrhd1500 2021-01-14 10:04:56 comment 25 0 Circuit Design
DIP size LT4320 is it available in schematic parts ?
I notice a DIP size LT4320 is available at various leading electronics parts stockists, however is not available in library parts, however other very difficult to assemble sizes are there Can the DIP size become available please thank you. #Schematic#
cdrhd1500 2020-12-22 20:25:20 comment 5 0 Circuit Design
Trying to make sense of RCA part representation
I am needing to place 2 RCA sockets in my schematic , however cannot make sense yet of the drawing what connects to what. Is the outlined bar earth, and if so why are their two contacts on it , or is earth the other pin. Could i suggest the outline image actually show a drawing of a RCA socket please. No RCA socket that i know of looks anything like either drawing. thank you #Schematic#
cdrhd1500 2020-12-22 20:16:35 comment 3 0 Circuit Design
Linux install, which folder is the one to decompress ?
Referring to the new easy EDA program you can download, I have downloaded for Linux and found a install instruction document, but sadly it does not provide any detail as to which folder is the one to decompress. Rather it states 1.Excute the Terminal at the decompress folder, normally hotkey CTRL+ALT+T(You need to use command 'cd' to change the terminal patch to decompress directory). You don't need to decompress the easyeda-linux-x64.zip file. Attached screen shows some folders, of which there are more folders within those folders.... presently unable to find which folder... Help #GeneralDiscuss#
cdrhd1500 2020-11-28 08:56:56 comment 23 0 Others
Increasing track width on pcb
Hi I am wanting to slightly increase track width of copper tracks, as the board I am designing could benefit from ability up to 8 amps of current- present tracks appear good for about 3 amps. How do i increase track width ? thank you #PCB#
cdrhd1500 2019-12-02 17:47:52 comment 1 0 Circuit Design
How do i create a border around a irregular shape to get auto router to check it
I have commenced a PCB , and I have used PCB tools Solid Region to create the shape, however it is not being recognized by panelize or auto router How can I get a border around a irregular shape ? #PCB#
cdrhd1500 2019-05-15 15:54:57 comment 4 0 Circuit Design
joining one component to the next red dots ?
Hi I am finding despite joins from one end of a wire to another, components are not joining, showing up only when I go to convert to pcb. Are the red dots mean't to appear if the join is successful ? and do the red dots or should the red dots occur at each end or just one end ? #Schematic#
cdrhd1500 2018-08-08 19:52:05 comment 1 0 Circuit Design
How do you move components to pink box ?
I have studied this tutorial https://www.youtube.com/watch?v=GtTeltGpOPg and at 10.35 - 10.40 components are moved into the pink box, sadly though it is not explained how you actually select them or move them. I have tried a blue outline that encompasses the design and copy a paste just duplicates what is being moved which ends up a mess so matter of starting again. can it be explained how to select the components and move them to the pink box as the video shows please #PCB#
cdrhd1500 2018-08-01 13:10:05 comment 3 0 Circuit Design
No Audio in demo Video
Having a commentary to follow the demo video, I consider would help greatly, is this possible please. #GeneralDiscuss#
cdrhd1500 2018-06-24 06:08:37 comment 1 0 Others
Remove crosshairs please
In schematic editor, one is confronted by crosshairs continually being in the way, the crosshairs appear so important in movement that you cannot move or edit components as they are always there. You briefly have a moment without them, then OMG they are back again Any chance we can end the crosshair silliness please and do instead exactly as Oregano does which is be the best schematic editor on earth. #Schematic#
cdrhd1500 2018-02-22 08:36:19 comment 6 0 Circuit Design
Runs out of Wire Again
BUG Concise problem statement: Steps to reproduce bug: 1.Drawing a line from one part to another 2. 3. Results:Runs out of wire, making connection from one location to the next impossible Expected results: Remove the crazy cross hairs please , they drive me nuts ! Browser: Mozilla #BugReports#
cdrhd1500 2017-04-20 11:10:03 comment 4 0 Bug Reports
Error with integrated circuit part
My project involves 3 x CD4069. I am using the parts library part When exporting to PCB I strangely get 6 x 4069 showing. It is as though Pins 14 Vdd and Pin 7 Vcc that requires placement for a functional circuit, then fail to incorporate correctly in each 4069 outline. Rather they cause the program to generate a separate integrated circuit. I am then finding the pcb outline fails to join pins 14 and 7 correctly Should I leave out 14 and 7 out and try to join them following the schematic stage- somewhat counter intuitive I think, but would that work ? Thanks #PCB#
cdrhd1500 2017-02-06 05:03:35 comment 5 0 Circuit Design
Unresponsive as though limit reached
BUG Concise problem statement: Steps to reproduce bug: 1.I have 4 schematics nearly complete 2.I rotated an op amp to satisfy actual prototype circuit 3.Can no longer make additions, have saved, waited 15 hours still the same Results: Non responsive to any further changes Expected results: That I should be able to continue despite rotating component Browser: Mozilla Firefox #BugReports#
cdrhd1500 2016-11-06 23:07:32 comment 5 0 Bug Reports
Jumpers in Schematic not available in PCB ?
It is common to have jumpers in schematics due to the way components orientate. How does one then overcome the limitation of the pcb conversion being unable to recognize jumpers ? Perhaps there is a part I am not seeing yet, that distinguishes where paths do not, or cannot on the schematic physically join, but never the less have to be drawn across one component to get to the next. Thanks, I look forward to replies. #Schematic#
cdrhd1500 2016-10-01 07:42:14 comment 1 0 Circuit Design
Is there a dual op amp available in parts?
I am entering components to a schematic, whilst I see a 741, I cannot find a dual op amp. Is there a way of accessing a dual type ? Thanks #Schematic#
cdrhd1500 2016-09-29 18:25:10 comment 2 0 Circuit Design