Net Check - Bug [RESOLVED]
Major Bug In latest desktop version of EasyEDA standard, there is a bug in the net checking tool that will falsely show that all nets are connected together. I've put together the simplest example and shared it here: https://oshwlab.com/cjohnson/net-connection-bug This bug caused a massive problem on our production board where a change to the board created a ground plane island, which was missed in visual inspection and not caught by the net check tool. This bug is not present in the web version of EasyEDA as of 11/9! Desktop: Web Version: #BugReports#
DXF's Created by EasyEDA not readable in Inventor
I have been working with Autodesk to get a DXF issue resolved. When importing DXF’s we are getting an error in Inventor. Please see the case below: https://www.autodesk.com/support/technical/article/caas/sfdcarticles/sfdcarticles/DXF-files-created-by-EasyEDA-Standard-Version-6-5-22-are-readable-by-AutoCAD-but-not-readable-by-Inventor.html I have received a response back from Autodesk developer: "The problem is in the dxf file itself NOT in RealDWG. The layer objects in the dxf file reference handle 21 as the material. The problem is that handle 21 is the handle of an AcDbBlockEnd object NOT a material object. If you open the dxf file in a non-prod AutoCAD or a RealDWG app built using non-prod RealDWG, you will get an assert that is triggered when a layer with a bad material id is closed. The assert comes from non-prod only code that checks to see if the id is a valid material id and asserts if it is not. I tried opening the file in AutoCAD using the RECOVER command, but our audit/recover complex does not fix bad layer material ids. Also, recover says that the handseed value in the dxf file is too low (which it does fix), so that’s another problem that could lead to issues." Can we submit this to be fixed in the next version of EasyEDA please? #BugReports#
Project Creation Failed
Trying to create a new project in my team, every time I try, it gives me a project creation failed message. I can create projects in my personal folder, but not in my team. #BugReports#
Board Cutout - Gerber Generation JLCPCB Conflict
Placed an order for one of our boards designed in EasyEDA Std that has potting cutouts in the middle of the board to allow potting compound to seep through the board. Received feedback from JLCPCB asking if I wanted the cutout to be to the outside of the gerber lines or the inside, when the outside of the cutout should always be the center of the line. Here's JLCPCB's rules on board cutout lines in the Gerber Files per their response Here's the lines generated from EasyEDA std when using "Board Cutout" Here's the layout in EasyEDA Std #BugReports#
Schematic Block - Change Image?
In EasyEDA Standard we are able to remove the EasyEDA logo and insert our own in. I'm not seeing the ability to do this in EasyEDA Pro, has anyone figured out how to do this? I could easy just place a white rectangle and set to fill white/place our logo over top of it, but I'm looking more for the right solution and have it saved to our schematic sheet symbol. EDIT: NVM I figured it out. Go to Library -> Project -> Select Symbols. Find the sheet symbol and click edit. Now you can edit the actual symbol file and save it to your team or personal. #Skill#
Export BOM - Not working
The Export BOM tool is not generating a file for download. I've tried restoring defaults, CSV, XLSX - neither are generating a file for download when I click Export BOM. #BugReports#
Library Search Issue
In EasyEDA Pro I'm having an issue with the Library search functionality. If I type in a part number of a part that is in my team it defaults to search in System, which is fine, but if I select my team it shows results under my team then immediately switches back to the System tab. #BugReports#
3D Model Manager and 3D Model Import
Getting started with EasyEDA Pro on a new project and having some difficulties with the 3D model manager and importing 3D models in general. I've designed my own 3D model for a part with the origins shown below. When I import this model in to EasyEDA it doesn't use my origins when trying to determine orientation and midplanes for the part. In the Z direction it creates a midplane of the entire dimensional height of the part (if someone didn't know the length of the leads there's no easy way for them to enter the exact dimension to get it flush with the PCB), X and Y direction are seemingly random, as they are not in the middle of the X or Y direction. Below the 3D model is a screenshot from the 3D model manager issue. Because of this, clicking Auto does not result to anything close to what it should be. The first image is the Auto calculation. Second image is after entering in my math'ed values to get it flush on the PCB and roughly close to lining up with the pin holes (I can't calculate the exact Y offset because I have no idea where it's calculating the plane offset from). The model was exported from Inventor Pro in mm format, and the model was set to default (mm) when importing the 3D model in to EasyEDA Pro. #BugReports#
Subfolders disappear after refresh list inside team
I created "Test Folder" and "Test Folder 2" directly under my team. I then created "Test Sub Folder 3" underneath Test Folder 2. If I "Refresh List" the "Test Sub Folder 3" sub folder stays in the list. If I create a sub folder within a team with a project inside it, then refresh the list. The sub folder disappears and the project is put in to the main directory. It appears this bug only happens in a team. Regular folders work, but sub folders do not stay persistent. If I create another folder directly under the team and move that folder into another folder, it stays persistent. #BugReports#
Import DXF - Draw lines same size as in file
I've got a rather complex DXF I'm importing that I want the line sizes in the DXF file to be what EasyEDA draws them as. Right now in the import DXF window it forces you to choose a line size. Example: DXF: EasyEDA after importing: #FeatureRequests#
DXF Export Issue
In v6.4.20.6 when File>Export>DXF is chosen, no options for tracks/silkscreens/etc are given. The exported DXF is not useable. Here are two images comparing the two exports (ignore the cropped sections of second image): v6.4.19.4 v6.4.20.6 #BugReports#
Autorouter Not Functional
While trying to put together an example project for this bug: https://easyeda.com/forum/topic/Copper-Area-Add-Rmove-Vias-not-working-or-feature-not-clear-ff0ea29cb3ff4fac8be76b56e7bf9a37 I've come across issues with the AutoRouter. I've tried running it locally and in the cloud. When ran in the cloud it runs for about a minute with no progress at all then gives the "due to limitations of the server, multiple instances cannot be run" message. Very similar to @rafaelh96 issue in this case: https://easyeda.com/forum/topic/Autorouter-not-working-3d57d24f22044228a63c0f2060c8d111 When ran locally it attempts to run the same trace ~20 times (over itself) then the command window shows connection closed and it stops progressing (still shows 0% the entire time) #BugReports#
Copper Area - Add/Rmove Vias not working or feature not clear
I've got a 4 layer design and want to add stitching vias to the copper areas. I try to use the Add/Rmove Vias function but it doesn't add any vias. Am I not using this feature correctly or is it a bug? Thanks, Colby #BugReports#
Improvements to signal routing
Currently we have differential signal routing. It can route two nets with names something_A/something_B. I would like this feature improved to include signal routing for more than two signals. Naming convention like something_1/something_2/etc. A use case would be usb 3.0, fpc lcd connectors, sram chips with many address lines, sqi data lines, etc. #FeatureRequests#
Simple AC circuit simulation
EDIT: Wow, theta was set to 1. Sorry everyone, if you see a degrading AC power supply make sure to check your Theta value. I threw this in to Tips & Skill, because I'm hoping to learn something here. I've used LTSpice before, but it's been a few years. Setting up a simple AC -> logic level power detection circuit for 24-48VAC. The circuit we are already using works, but I'm going back to simulation to see if I can improve the noise we currently have in the circuit. Anyways, when I setup this simple analysis I get an AC power supply that degrades over time, and I know I've got to be missing something simple but I just can't figure it out. TIA #Skill#
Multiple Isolated Grounds
Not aware if this is possible in EasyEDA, so this would be a feature request. When designing isolated/flyback/transformer power supplies, the need arises to have separate ground planes. In this schematic from an MP6002, the MP6002 has its own ground separate from the output side ground. It would be nice if when placing the ground symbols if we could somehow separate them. #FeatureRequests#
JLCPCB Order Support
I've submitted an order for a design that we have already ordered and received from JLCPCB. They keep cancelling our order due to the minimum mill spacing between our columns. I have sent two emails trying to clarify the issue, no one is responding, yet they had time to cancel our order again in the meantime. They are saying the minimum mill spacing is 1.6mm, which is EXACTLY the distance between our columns. Someone needs to respond to our emails or contact us instead of just cancelling our orders continuously. Our order number is W202001170524527 #PCB#
DXF Export Issue
Went to go export a PCB DXF today and ran in to an issue. This is what I've selected: The generated file looks like this: You can see that all the vias are showing up in the exported DXF. #BugReports#
Panelize Tool - Row or Column Spacing CUTOUT on V-CUT
Can we add in a feature to have cuts with the panelize tool in V-CUT mode? This is hand drawn, when using the panelize tool, it will create tiny PCB's between the boards. In this design the PCB's themselves are very small so it is very difficult to break off the tiny column PCB's in between. #FeatureRequests#
Export Pick and Place File - Set X and Y direction and Custom Fields
When generating pick and place files a couple features would be really helpful to have a couple new features: Ability to set the X and Y direction. In the most recent update, X is positive in the right direction and Y is positive in the upward direction. The X axis is fine, but the Y axis is backwards from how our pick and place machine wants. This is easily fixed in excel, but it would be nice to have this adjustable. When we generate our pick and place files, we need to add our internal part number to the CSV file so that our pick and place software knows what parts to use for each component. Right now we do this by hand, but if we could add our internal part number in to the pick and place file (similar to how we can choose parameters to show up in BOM) that would simplify this process greatly. #FeatureRequests#
Insert PCB as Image to PCB
@phamduyscb You needed to start your own thread, so here's that thread. You want to insert a picture of a completed PCB as a new PCB. The problem is two-fold: 1. You are using a JPEG. This is a compressed low-quality image standard\, so your results are not going to be great. Use a PNG or SVG\, really any other format. 2. The image you are trying to import has multiple layers on it. It has silk screen and copper layers. If you really want to go this route\, we will need to separate the layers. Here's a quick example using your image. You will be able to see the low quality of the image in the PCB, but EasyEDA does smooth the image some, which will help you in this case. Here's the original image: Let's separate the copper out of the image. Which leaves the silk screen looking like: I have no idea how big this board is, since you chose JPEG, which has no size details built in to the format. Import in the silk...this is not EasyEDA's fault, your image is of terrible quality. And import the copper over that.... Moral of the story is, this is not a good way to copy a PCB. There are much better ways to do this. #GeneralDiscuss#
Design Rules - Net to Net Rules
Description of Feature: Ability to create net to net rules in the design rules window. These rules will create DRC errors if the distance between the specified nets is violated. Why: Some designs will have high voltage and low voltage on the same board. The distance between the high voltage (if they are the same polarity) does not need to be the same distance as the distance from that high voltage net to lets say ground, +5V, +3.3V, etc. Basically what I'm doing right now is setting the rule of my high voltage nets to the higher distance rule, then ignoring DRC errors of high voltage -> high voltage. #FeatureRequests#
Undo Button not working
The undo button isn't working as you would think right now. It seems to only undo text or canvas setting changes (routing width, etc) instead of undoing your last trace. #BugReports#
Gerber Generator not creating bottom solder mask properly
Just placed an order for some boards, and received a message back from JLC that the bottom solder mask layer was not present. Inspected my gerber files, and there is a bottom solder mask file present, but no matter what software I use the bottom solder mask does not show up. In fact it crashes GerbView software when I try to add the layer, top solder mask works just fine. Here's a screenshot of the board in JLC's preview window. Any ideas on why this is happening? Need to get these boards ordered asap, but I'm not sure how to respond to the JLC representative. The bottom layer is a copper plane with a couple of vias down to it. The JLC rep is giving me two options: "If it is normal, there will be two cases that we deal with the order: 1) to cover it all with tin 2) to cover it all with solder mask. No copper exposed is available. Then how to do with your order? Situation 1 or 2???" #BugReports#
EasyEDA API: Inserting Image
Working on trying to standardize our company schematics. When we create them we always place our company logo and company name in the title block. I'm working on trying to automate this with a script, and am running in to a documentation limitation. api('createShape', {shapeType:'image', from:'system', title:'company_logo', x:500, y:500}) What is the JSON tag to insert the url for this image? I've tried shortUrl and data:image/png;base64,\ but haven't had any luck. I've also looked at this documentation :https://docs.easyeda.com/en/DocumentFormat/2-EasyEDA-Schematic-File-Format/index.html-> scroll down to "Image" Image "I~610~10~271~105~0~https://easyeda.com/assets/static/images/logo-140x39.png~gge12" Format: Check Image element of SVG out. command: I x: 610 y: 10 width: 271 height: 105 rotation: 0 href:https://easyeda.com/assets/static/images/logo-140x39.png id: gge12 locked:null Still currently unable to get what I want out of the API. #BugReports#
EasyEDA API : Inserting image
Working on trying to standardize our company schematics. When we create them we always place our company logo and company name in the title block. I'm working on trying to automate this with a script, and am running in to a documentation limitation. api('createShape', {shapeType:'image', from:'system', title:'company_logo', x:500, y:500}) What is the JSON tag to insert the url for this image? I've tried shortUrl and data:image/png;base64,\ but haven't had any luck. #Skill#
Board Outline - Manual Drawing
I'm trying to draw a custom panel with plunge routes between the boards. Anytime I try to draw board outline within an outline, it changes the board dimension. Is this a bug or is there another way to draw custom panels? I cannot create the panel using the panelize tool, it's not possible. #BugReports#
DXF Export Options
Can we add in exporting the silk screen to the DXF file? When we send our designs off to customer for review, they will want the silkscreen visible in the DXF file. Thanks! #FeatureRequests#
Panelize Function - More Options
In the PCB panelize window, I'd like a couple more options. Border Position: Left and Right, Top and Bottom, All Sides Positioning Holes: Yes (1 per border edge), Yes (2 per border edge), No This would allow us to draw the final production boards using the panelize tool. Thanks! #FeatureRequests#
Panelize works, but document text is wrong
When panelizing a board layout, it works as expected but the note in the document of the gerbers is wrong. See attached photos. #BugReports#