asdasdasd
Minor modification to library part footprint - getting stuck
Hello, I am attempting to modify a simple part (PCB spade connector) and I'm having a bit of trouble. One problem is probably my inexperience, but the other problem seems to be a bug. The part number is C9900026365 1) I have added some copper areas, but I get connection(shorting) errors in PCB layout. How can I resolve this, please? 2) When I open the part for editing, there are two pins labeled pin 1. This is obviously correct, but once I attempt to save the part, the footprint editor tells me duplicate pin numbers cannot exist. I have attempted to leave the second pin blank, but it seems to cause net problems during PCB layout. I believe this is a bug with EasyEDA. This is the original part: I want a larger solder area to double as a solder pad when spade terminals are not used. This is my modification, adding 2 circles and a rectangle, all of which should be exposed copper: Any help would be greatly appreciated, Dax Liniere. #Library#
daxliniere 2025-01-12 03:21:21 comment 6 0 Circuit Design
Script to change net labels of tracks
The situation: updating the schematic is supposed to update all net labels, but sometimes tracks, arc, solid areas, etc are not updated and cause Ratnest lines to appear everywhere. These need to be manually found and corrected. It would be great to have a script which would look at a selection of PCB features and, for all that are connected, they are changed to have the dominant net label of the selection. #Extension#
daxliniere 2023-06-12 02:51:00 comment 0 0 API & Extension
BUG: Update From Library doesn't work if more than 1 item is selected
I'm posting this not because I think it'll get fixed, but because it might help someone else who is having this problem. It's cost me HOURS of time. Basically, if you update the footprint of a component that is already used in your schematic, you need to find every instance of that component, right-click it and select 'Update From Library' one-by-one. After you've done all of those, THEN go to your PCB layout and select Import Changes. If you try to use a faster method, like selecting all of the schematic parts that have been updated and using 'Update From Library' once (which, let's be honest, is the obvious way to do it), when you click Import Changes in your PCB, it will either not update anything or completely remove EVERY COMPONENT YOU HAVE PLACED. Remember, if EasyEDA borks your project, you can select an 'Historical record' from Project tab>Your name>Your project>Your schematic>right-click. #PCB#
daxliniere 2023-05-09 06:37:54 comment 1 0 Circuit Design
All the problems with EasyEDA and why I'll switch to Flux.AI/etc
I have been struggling with EasyEDA since December 2022. Even with the pain of having to relearn a new piece of software, I cannot see myself using due to the constant hiccups and workarounds that massively reduce productivity. Aside from the high-level issues and bugs in EE, below is my personal list of problems that make the user experience absolutely tragic. They mostly pertain to the PCB editor, but many apply globally. 1 - First and foremost; the complete lack of official support and updates. I've been very fortunate that Andy Fierman (not an EasyEDA employee!) has helped me figure out some of the problems I've faced, but this is not fair on him and is not an acceptable solution. If EasyEDA is EOL/dead and will not receive further updates, please just tell us. 2 - No real-time support community space. Discord would be a perfect place for this. 3 - Bug: cannot update PCB design if PCB is more than 2 layers. The only workaround is to completely delete everything in your inner layers. Not an acceptable solution. 4 - No shortcut to toggle snap. I have created my own mouse macro with AHK, but, by definition, using it requires that any selection is removed. (You can't access the snap options with items selected.) 5 - No ability to group selected items in PCB editor. 6 - No ability to save and load a selection if items. Being able to save multiple groups into 7 - Nets frequently become broken (unassigned) for non-obvious reasons. Further, there is no native tool to repair disassociated nets. 8 - Flip Horizontal/Vertical are very frequently not available for selections of certain items. 9 - Updating a component's footprint in the Schematic window either a) breaks things in the PCB window or b) doesn't work at all. 10 - No shortcuts for third-party scripts. 11 - Lack of tools to flip a component layout from one side of the board to another (including correct mirroring of components, etc) 12 - Bug: Areas of exposed copper are not moved along with the shapes that were used to create them. 13 - No native tool to join tracks. (Third-party script exists, but only 2 tracks can be selected at once) 14 - Sometimes undo just doesn't work or running undo/redo will leave behind items. 15 - Undo for shortcuts B & T (when executed on multiple items) undoes each item separately (does not undo the entire group at once). #BugReports#
daxliniere 2023-04-25 06:25:52 comment 1 0 Bug Reports
PCB won't update when inner layers exist
Please see here this nasty bug. I lost a lot of hours of work trying to find the solution. I even downloaded Flux.AI, but this project is complex enough that I decided I didn't want to recreate it from scratch. If EasyEDA doesn't fix these bugs, they risk users' frustration turn into migration to another software platform and I'm sure you don't want that. Details are here: https://easyeda.com/forum/topic/Updated-PCB-Import-Changes-never-completes-8bf09f3271ce42a98478bf055a5672d9 All the best, Dax. #BugReports#
daxliniere 2023-04-20 07:43:32 comment 0 0 Bug Reports
Deleted schematic components are added back into PCB layout
My EasyEDA project was getting really buggy; not updating components correctly, wires becoming disconnected for no reason (both of which I've reported in other posts, with no reply), so I decided to move some of the daughterboards to their own schematics and PCB layouts in the same project. I did this by first cloning the schematic, then renaming to SCH daughterboard 1, then cloning the PCB layout and renaming to PCB daughterboard 1. I then went into both schematics and removed the unneeded components (divided them in half, basically). I even went into the PCB layouts and removed those components on each. However, when I run Design>Update PCB, the removed components are restored, even though they don't exist in the schematic from which the PCB was derived! What is going on, please? I wanted to use JLCPCB to make the PCBs for my new product, but I'm having so many headaches with EasyEDA and no-one seems to even respond to these bug reports. Best regards, Dax Liniere. #Schematic#
daxliniere 2023-01-29 22:36:57 comment 5 0 Circuit Design
Major BUG: Components not fully updated
I have been having no end of trouble trying to change the PCB footprint of some existing components. After much investigation, I can see that there is a bug in EE. I have even swapped out the components in the Schematic, then run Design>Update PCB to no avail. I have also tried forcing an update by selecting Update From Library in both Schematic and PCB workspaces. In a last-ditch effort, I even CTRL+F5 refreshed the page. Every time, the parts still end up using the wrong footprint. How soon can we get a fix for this and the other bugs I've flagged, please? This forum is very quiet. Happy to provide any further information required. All the best, Dax Liniere. #BugReports#
daxliniere 2023-01-13 09:03:00 comment 3 0 Bug Reports
Footprints for 2 pin and 3 pin screw connectors are completely different
Title says it all. Not only are the footprints drawn differently, but they don't even align with each other. These are both stock ("Commonly Library") parts, so I would have thought they wouldn't have this problem. #BugReports#
daxliniere 2023-01-13 07:13:27 comment 1 0 Help & Support
BUG: Wire colour isn't imported from EasyEDA STD project
If you have coloured your wires in EasyEDA Standard (web) edition, once imported into the desktop JLCEDA Pro version, those colours are not preserved. Instead they are reset to default green. #BugReports#
daxliniere 2023-01-11 09:39:18 comment 1 0 Bug Reports
BUG: Update From Library hangs browser
In the schematic and PCB editors, if you select, say, 40 of the same part and choose Update From Library, the modal window that opens is extremely slow. Clicking the 'select all' checkbox in the top left corner hangs the browser for 30+ seconds. During that time, Chrome displays 'webpage not responding' warnings. If you wait, it will eventually work. Even selections of around 20 of the same part will cause this hanging behaviour. Please let me know if you would like any further details. All the best, Dax Liniere. #BugReports#
daxliniere 2023-01-07 12:15:07 comment 1 0 Bug Reports
FR: Improvements to LCSC Electronics part searches
1) Please add 'Sort by column' function. This would be accessed simply by click the column header. Clicking again would invert the sort order (lowest to highest -> highest to lowest). 2) Please add ability to specify more than 1 selection from each filter type. For example, you can't select capacitors with 25v and 35v ratings at the same time. You must perform 2 separate searches. This is not as efficient as it could be. The RS Components website has this feature along with the ability to specify a RANGE of values (e.g. 25v-50v) Best regards, Dax Liniere. #FeatureRequests#
daxliniere 2023-01-06 12:36:12 comment 0 0 Feature Requests
FR: Bus entry is missing colour property
Bus entry points don't have a colour property so, while you can set the colour of the bus itself, the entry points are only default green. Please add this property. Best regards, Dax Liniere. #FeatureRequests#
daxliniere 2023-01-06 12:31:54 comment 0 0 Feature Requests
Extra vias/pads created when middle-click panning with Via/Pad tool selected
Dragging the mouse while holding middle-mouse button allows you to pan around the PCB layout area. However, if you have the Via or pad tool selected, each time you click the middle mouse button on the page, it creates a via/pad at that position. The wire tool does not have this problem. Feel free to contact me for more information. Regards, Dax Liniere. #BugReports#
daxliniere 2022-12-31 10:59:03 comment 1 0 Bug Reports
FR: Shortcut to toggle snap
We really need a shortcut to toggle snap on/off, please. #FeatureRequests#
daxliniere 2022-12-28 09:28:11 comment 2 0 Feature Requests
Moving selection of components breaks connections
Hi all, I'll first admit that I'm very new to EasyEDA. However, I've found an issue that if you select several components and attempt to move them together, the connections between the components becomes broken. Firstly, can anyone else confirm this behaviour in the online (STD) version? I'm running Chrome on Windows 10. Secondly, is there a tool to fix this or will I have to correct every connection manually? Thanks in advance and Merry Christmas, Dax. #BugReports#
daxliniere 2022-12-25 13:48:44 comment 7 0 Bug Reports