Problem with 3D export
For some reason, for which I have been unable to find a workaround, when I export a 3D STEP file in EasyEDA Pro, it creates a huge solid cube with a very small part of the PCB sticking out of one side of the cube. #PCB#
Copper regions are invisible
I've imported a PCB that in most respects has been successful. It appears to have many copper regions, but I am unable to make them visible. I have clicked the various eyes in the left-side Object--> Copper Region area. No change in visibility. I've gone to the right-click a region-->Copper Region-->Show All Copper. No change in visibility. I can see the copper region outlines and slight shading, but I can't get the copper to show. #PCB#
Problem with resizing schematic drawing area in EasyEDA Pro
I imported my project from EasyEDA Standard. Sometime later I wanted to increase the size of one of my schematics. Since Pro no longer allows me to simply stretch the drawing frame, I edited the height value. I got a kind of strange warning about not being able to undo, but I thought "how bad could it be?" To my great surprise, the frame was completely repositioned above all of the schematic contents, without changing the frame height, but leaving the project name, date, etc behind. Now,if I change the frame height it simply draws a single line to that height, leaving the border where it was. I can't move the project name or date or other project particulars, both they and the frame can not be selected or moved. I can still edit those elements, but they don't show up where thery're supposed to be. I can select all of my schematic elements and move them into the frame, but I'm left with quite a mess. And, as warned, there's no Undo.... #Schematic#
Can't import or open Half Offline Mode project in Online Mode
I have a project in EasyEDA Pro that I've saved in Half Offline Mode. I want to open it in Online Mode. I have tried to follow instructions for importing the project, but when I do, I get the message "The imported file format incorrect or doesn't match current type, please re-select and import." I can't open the project, when I try I can't get to my local directories. If I double click the project, the Mac tries to open it but then nothing happens. #Others#
Problem with small, dense pads and routing.
My project uses a 0.5mm BGA component and I'm densely mounting small caps and resistors on the opposite side of the board using via-in pad. Most of the routing, which I'm doing manually, is fine, but for reasons that are unclear, some routing of traces gets balky or won't even start. Sometimes I can start a trace and then finish to connection by dragging one end of the trace to the pad, then adjusting the trace path manually. Other times I can't even get a trace to start. If I am successful in connecting the traces that don't want to connect themselves, DRC check is fine. This seems like a bug. Is this a known issue? I think I can resolve the problem by importing the project into EasyEDA Pro, but i prefer to use Standard since that is what I an used to, #PCB#
Problem at JLCPCB
JLCPCB contacted me about a board I want them to make. They say there's an issue with one of my component pads. As I understand the issue, "the indicated solder maskopening, there are no pads for them on copper layer". However, I can't see the problem in my EasyEDA design: I tried re-uploading the Gerber from a different computer, but they say the problem still exists. Any idea what is the problem? I have used this component in several iterations of the PCB at JLCPCB without an issue. #PCB#
Parameter doesn't update in BOM
I have a parameter key "Mounted" with a yes/no value. Sometimes it doesn't update the BOM. Any ideas on how to get the BOM to update this parameter? #GeneralDiscuss#
Unshare a shared project
I'd like to unshare some projects that are shared on OSHWLab. How do I unshare or remove the projects? #GeneralDiscuss#
Using vias to connect to pads
I've tried to find the answer to this in the tutorials and in the forum, but I haven't been able to. Will vias that connect directly to pads cause any issues in assembly, or is it better practice to put the via outside the pad and connect it with a trace to the pad? #PCB#
Component selectable area too large. How do I edit?
I have some components that have very large selectable areas: Having the area where the component is selectable larger than the component sometimes causes me to select the wrong component which can lead to inadvertent component moves, especially since even when the component is not visible, it is selectable. How do I make the selectable area the appropriate size for the component? It would also make sense to me to have invisible components be non-selectable..... #PCB#
Can't find my footprint in Footprint Manager
I modified a footprint and saved it with a different name. Now, I can find it in my library, but I can't find it in Footprint Manager. I've tried logging out, quitting and restarting my browser, logging in in a different browser. I've had this issue before, and the footprint eventually shows up. Any suggestions? #BugReports#
Problem with Update PCB
Often, when I add or change a component in the schematic, and then I Update PCB, the net name or names get changed, the traces and vias Net names get changed, but the pads keep their old names. This then requires me to go through the entire PCB and change all the trace and via Net names back to what they were. This has created a fair bit of work for me over several projects, but I have always managed to get it sorted out. Until now. I added a jumper header to an existing Net. I then fixed the changed Net names of the traces and vias, and got DRC to be happy once again. But now, If I do an Update PCB, it wants to change a bunch of trace and via Net names again, even though if I highlight the Net in the schematic, it only amounts to a one-to-one connection. I added H3 in the middle of a circuit. That created the Net R2_2. Here is R2_2 after fixing all the messed up trace and via Net names, but before I Update PCB: And here's R2_2 after I do an Update PCB: Now I can't figure out how to fix it. I'd like help getting this fixed, but I'd also like to learn how to add or change components without messing up the Net names of my traces and vias. #PCB#
A DRC error I don't know how to fix.
DRC is showing that there's a clearance issue between 2 multi-layer pads and the Copper Area(GND). The referenced insufficient clearance is apparently the clearance specified in the Copper Area settings, which I have set to 10 mils.. Increasing the copper area clearance doesn't fix the issue, it only increases the clearance stated in the error. It's behaving as if rebuilding the copper area doesn't give sufficient clearance around these 2 pads. Thanks for any help. #PCB#
Using copper area to connect components
I'm using a copper area to create a very large trace between two components. I've got the copper area outline and I've edited the points to be sure it's closed. If I rebuild it seems to complete. The Net is correct. My problem is that this copper area won't fill. The top layer copper that includes this new copper area doesn't pour around it, it covers it like it doesn't know it's there. DRC check shows there's no connection between the 2 components. Am I trying to something that's not allowed, or am I doing something wrong? Thanks Doug #PCB#
Something is wrong with the auto router
I've tried numerous times to auto route a board, both with the cloud and local auto routers. It says it's at 75%, but it leaves many traces un-routed, even though they would be easy to route. It does fine with the left half of the board, but almost completely skips the right half. #PCB#
How do I see the bottom in photo view?
I'm using Chrome on Mac. I haven't been able to figure out how to see the bottom in photo view. From the forum I take it that there is a way, but I can't find it. #PCB#
How do I delete components from the Libraries?
I've ended up with several slightly different versions of components in my personal (workspace) PCB library. I'd like to delete some of them. I've searched the forum and done a general search, but I can't find the answer to this, nor can I find an active command for deleting a component. Thanks Doug #GeneralDiscuss#
Strange copper behavior
I added a copper area and it was built correctly and shows as TopLayer. When I change it to BottomLayer, it builds, but disappears, even though I have it set to Visible. How do I make it Visible? #PCB#
Notes in projects
I'd like to be able to keep a set of notes, just text, with each project. #GeneralDiscuss#
How do I specify DNP (Do Not Populate/ Do Not Place)
I have components in my design that I don't want to be part of my BOM. How do I designate them as DNP so they are not part of the BOM? #GeneralDiscuss#
Auto routing seems to be broken
When I auto route, I get lots of DRC errors. It routes through pads on other nets, it routes through already laid-out ground planes. This was not a problem previously. What happened? How do I fix this? Am I doing something wrong? #PCB#
Almost finished, but I've got errors
I've got a bunch of Nets errors in Schematic view. They all seem to have to do with nets not being connected to pins, but even at high magnification, they look good. How do I determine what the problem is, and how to fix it? #GeneralDiscuss#
Design checks in 5.3.2
How do I do design checks (components, nets, and DRC errors) in v5.3.2? #GeneralDiscuss#
Skip Nets not working as it should
BUG Concise problem statement: Assigning already routed nets to the skipped net list, they should be left alone, both for routing and removal. Skipped tracks should NOT be removed, but they are. Steps to reproduce bug: 1.Hand route some tracks 2.Assign those tracks to the Skip Nets list 3.Leave "Remove Existing Tracks" checked so re-routing is possible if needed Auto route Results: Hand routed tracks are removed. Expected results: They shouldn't be removed, they should be skipped. Browser: Chrome #BugReports#
Pre-routing some traces
I want to hand route some traces, then use the auto router. How do I keep the hand routed traces if I need to re-auto route. I know that I can uncheck the "Remove existing tracks" checkbox to keep my hand routed traces the first time I auto route. But I don't know how to protect my hand routed traces after that, if I re-auto route. #PCB#