Can't open EasyEDA projects
See screen grab below. Most of my projects folders are not clickable. I want to open WMD-13 for example and it doesn't respond to clicking. #Others#
Need footprint
I have a stock of 2.5 mm stereo audio jacks from CUI (now Same Sky), part number SJ1-2513-SMT-TR, but they are no longer in production and I cannot find a footprint for them. Anyone know how to get one into EasyEDA to place on my schematic? #Library#
Hole size error
I am trying to use the AutoRouter and I get the following error message: "Hole size cannot be less than DRC setting value." Of course it doesn't tell me what hole it is complaining about or what size it is or what the minimum size is. I have 8 holes on my board, one 4.5 mm and seven 2.0 mm. None of them seem small to me. And anyway, when I go to DRC Settings, there are only two settings that mention holes - one is Hole to Hole (2.54 mm) and the other is Via hole size (0.305mm). Neither DRC rule seems to apply. What is this message complaining about and how do I fix it? #PCB#
How to break a wire?
I very frequently have the need to break a wire so that I can move or delete one part of it. Or for the board layout, I want to break the rectangle so that I can add rounded corners. Right now, it seems that all I can do is delete the entire wire and re-draw it. Is there a wire-break tool? #PCB#
Auto Router running forever at 0%
I have a very simple board, two 16-pin components, one 4-pin component, six resistors and eight SIP-1 connectors. I don't have any design or net errors in the schematic. But the Auto Router never gets beyond 0% completion. On a nearly identical board a couple days ago, it completed in a few seconds. What happened? #PCB#
No 4-SMD packages?
I don't see any packages that fit this part: http://www.digikey.com/product-detail/en/sharp-microelectronics/PC451J00000F/425-2144-2-ND/720570 Maybe I just don't know the right package abbreviation. #PCB#
Stretching the board layout
Is it possible to select an entire edge of a board layout and move it? Every time I try, it just moves the center point and it is almost impossible to pull the corners to be in line with the center point so I draw the whole thing over again. #PCB#
Lost my schematic!
I did a page refresh and I no longer have the tab with the schematic. I have the PCB that I generated from it but no schematic. How do I get my schematic back? I tried Open EasyEDA file, and I thought all my work was saved in the cloud, but it opens a file browser on my computer. I don't recall ever saving anything there. Where is my work saved? How do I get it back? #GeneralDiscuss#
Super menu
I am new using EasyEDA (I started yesterday) so this may be the dumbest question yet. I go to the tutorial to get information and it helps. But the tutorial starts off using the term "Super Menu" right near the top and in almost every explanation, but never say what it is or where it can be found. And I can't find it!!! As a one-time tech writer for software companies, I get very impatient with basic documentation errors. The first rule is never use a term that you don't define first. What and where is the damned Super Menu? #PCB#
WeMOS part
I am using a WeMOS D1 Mini in my project and there is a part in the library named WEMOS_WEMOS that I used in my schematic. But when I try to Convert Project to PCB, it says it can't find the package WEMOS. There is a package in the library that looks right and is named WEMOS. Not sure what to do at this point. #Skill#
Extremely hard time connecting wires to pins.
This is my first attempt at making a schematic I am finding it very frustrating. About half the wire connections I try to make to device pins are OK and the rest are not. I have Snap to Grid on and it has never been off. The Grid size is 10 and snap size is also 10, Alt snap is 5. When a connection doesn't make, I can't seem to fix it either. I am about to give up and go back to Eagle. But I assume that it must be something simple that I am doing wrong. In Eagle there is a connection tool that you use to make a connection where two wires cross or a connection is close but not made. Is there something like this in EasyEDA? #Skill#