asdasdasd
Please fix Installer and sandboxing on Linux, bad user experience.
This is the experience of every Linux update: andre@andre-wks:~/Documents/EasyEDA-Pro/updater/easyeda-pro-linux-x64-2.2.27.1$ /opt/easyeda-pro/easyeda-pro [726814:0927/124926.800258:FATAL:setuid_sandbox_host.cc(158)] The SUID sandbox helper binary was found, but is not configured correctly. Rather than run without sandboxing I'm aborting now. You need to make sure that /opt/easyeda-pro/chrome-sandbox is owned by root and has mode 4755. Trace/breakpoint trap (core dumped) andre@andre-wks:~/Documents/EasyEDA-Pro/updater/easyeda-pro-linux-x64-2.2.27.1$ sudo chown root /opt/easyeda-pro/chrome-sandbox andre@andre-wks:~/Documents/EasyEDA-Pro/updater/easyeda-pro-linux-x64-2.2.27.1$ sudo chmod 4755 /opt/easyeda-pro/chrome-sandbox Please fix the insyallers for std and pro to handle this properly. This gives bad user experience (as the application won't work, and no message is given unless started from terminal), and this will happen om any modern distro. #Others#
dreAn 2024-09-27 18:54:48 comment 0 0 Others
How to avoid JLCPCB warning about components that will not be installed.
This is the object (basically used as pads) "Add into BOM" and "LCSC assembly" is "no" When uploading this to JLCPCB, I get warnings about components like this that will not be installed. Each time I need to check each one, how to avoid the warning about those? #Others#
dreAn 2024-09-25 19:05:52 comment 2 0 Others
EasyEDA-Pro fails to install on Linux easyeda-pro-linux-x64-2.2.28.1.zip
$ sudo sh install.sh ------------Start Installation------------ cp: cannot stat '/opt/easyeda-pro/easyeda-pro.dkt': No such file or directory ------------Install Finish, Please open it in the launcher------------ #Others#
dreAn 2024-09-19 15:18:47 comment 1 0 Others
Please fix the installer: it's been like this for half a year now:
andre@andre-wks:/opt/easyeda$ ./easyeda [230274:0801/084721.068418:FATAL:setuid_sandbox_host.cc(157)] The SUID sandbox helper binary was found, but is not configured correctly. Rather than run without sandboxing I'm aborting now. You need to make sure that /opt/easyeda/chrome-sandbox is owned by root and has mode 4755. Trace/breakpoint trap (core dumped) Same issue with the pro version too. All the installer needs to to is: sudo chmod 4755 chrome-sandbox #Others#
dreAn 2024-08-01 14:51:07 comment 3 0 Others
EasyEDA-Pro /std: unable to launch on fresh installed Ubuntu 24.04 "setuid_sandbox_host.cc"
$ cd /opt/easyeda/ andre@loke:/opt/easyeda$ ls chrome_100_percent.pak easyeda libEGL.so libvulkan.so.1 resources version chrome_200_percent.pak EASYEDA.dkt libffmpeg.so LICENSE resources.pak vk_swiftshader_icd.json chrome_crashpad_handler icon libGLESv2.so LICENSES.chromium.html snapshot_blob.bin chrome-sandbox icudtl.dat libvk_swiftshader.so locales v8_context_snapshot.bin andre@loke:/opt/easyeda$ ./easyeda [186978:0512/192512.050983:FATAL:setuid_sandbox_host.cc(157)] The SUID sandbox helper binary was found, but is not configured correctly. Rather than run without sandboxing I'm aborting now. You need to make sure that /opt/easyeda/chrome-sandbox is owned by root and has mode 4755. Trace/breakpoint trap (core dumped) andre@loke:/opt/easyeda$ cd ../easyeda-pro/ andre@loke:/opt/easyeda-pro$ ./easyeda-pro [187010:0512/192545.263188:FATAL:setuid_sandbox_host.cc(157)] The SUID sandbox helper binary was found, but is not configured correctly. Rather than run without sandboxing I'm aborting now. You need to make sure that /opt/easyeda-pro/chrome-sandbox is owned by root and has mode 4755. Trace/breakpoint trap (core dumped) andre@loke:/opt/easyeda-pro$ ls -lar total 189944 -rwxr-xr-x 1 root root 107 May 12 19:23 vk_swiftshader_icd.json -rwxr-xr-x 1 root root 6 May 12 19:23 version -rwxr-xr-x 1 root root 730528 May 12 19:23 v8_context_snapshot.bin -rwxr-xr-x 1 root root 407280 May 12 19:23 snapshot_blob.bin -rwxr-xr-x 1 root root 5131201 May 12 19:23 resources.pak drwxr-xr-x 3 root root 4096 May 12 19:23 resources drwxr-xr-x 2 root root 4096 May 12 19:23 locales -rwxr-xr-x 1 root root 5283316 May 12 19:23 LICENSES.chromium.html -rwxr-xr-x 1 root root 1096 May 12 19:23 LICENSE -rwxr-xr-x 1 root root 5849032 May 12 19:23 libvulkan.so.1 -rwxr-xr-x 1 root root 4206360 May 12 19:23 libvk_swiftshader.so -rwxr-xr-x 1 root root 6270416 May 12 19:23 libGLESv2.so -rwxr-xr-x 1 root root 2991224 May 12 19:23 libffmpeg.so -rwxr-xr-x 1 root root 243472 May 12 19:23 libEGL.so -rwxr-xr-x 1 root root 10404784 May 12 19:23 icudtl.dat drwxr-xr-x 2 root root 4096 May 12 19:23 icon -rwxr-xr-x 1 root root 6 May 12 19:23 electron-version.txt -rwxr-xr-x 1 root root 328 May 12 19:23 easyeda-pro.dkt -rwxr-xr-x 1 root root 151424560 May 12 19:23 easyeda-pro -rwxr-xr-x 1 root root 2999 May 12 19:23 EasyEDA-Distribution-License.txt -rwxr-xr-x 1 root root 50848 May 12 19:23 chrome-sandbox -rwxr-xr-x 1 root root 1123864 May 12 19:23 chrome_crashpad_handler -rwxr-xr-x 1 root root 180555 May 12 19:23 chrome_200_percent.pak -rwxr-xr-x 1 root root 128901 May 12 19:23 chrome_100_percent.pak drwxr-xr-x 8 root root 4096 May 12 19:23 .. drwxr-xr-x 5 root root 4096 May 12 19:23 . #Others#
dreAn 2024-05-13 01:29:23 comment 2 0 Others
EasyEDA pro, some odd missing connection between layers.
From Top layer left, from TG1: nothing in layer1 routed on inner layer2 arrives on bottom layer and still: you can see the ratline wire indicating missing connection. what's going on here? #PCB#
dreAn 2024-03-10 18:30:12 comment 1 0 Circuit Design
EasyEDA basic part, becomes extented when ordering
Here I choose a 56k basic part: and here , when tested by BOM-tool - it becomes an extended part: What is going on? #Others#
dreAn 2024-01-13 01:44:04 comment 1 0 PCB
My experience trying "pro" version:
1 1 most parts of images do not load 2 why did you let some drunk mess up hotkeys? R = rotate (in many systems) - not space .... W is wire ... not Alt-W (just to complicate things) 3 importing projects/projects with versions from EaseEDA(std) is a total mess - it is not clear if "all" projects can be exported/imported in one operation - and the results vary. 4 no more support for community-contributed components/parts? it is faster ... but .. do not sabotage things in step 1-4 #BugReports#
dreAn 2023-04-05 00:37:02 comment 1 0 Bug Reports
EasyEDA Pro - how to understand BOM/see if components are available?
-I see no way to indicate that I wish assembly of each component. -There is no price, even after update -I see no indicator of availability #Schematic#
dreAn 2023-02-19 18:52:12 comment 1 0 Circuit Design
Linux 6.5.9 (Ubuntu) client: shortcut is missing
no shortcut is made for the client, otherwise it works fine. #BugReports#
dreAn 2022-08-12 16:03:44 comment 1 0 Bug Reports
EasyEDA linux client - the preocess has no icon when started
Subject says all. EasyEDA shoartcut has a nice icon, once started, the process does not. Ubuntu 21.10 #BugReports#
dreAn 2021-11-08 00:21:48 comment 0 0 Bug Reports
Unable to "batch download" all projects (for backup)
clicking "batch download" does not allow to select all/download backup. #BugReports#
dreAn 2021-09-21 22:41:57 comment 0 0 Bug Reports
EasyEDA Linux install does not work, not updated since Aug 2018
Please fix and continue to be a real multiplatform app. #BugReports#
dreAn 2020-05-02 02:14:23 comment 3 0 Bug Reports
Gerber import (drirectly from EasyEDA) tend to stop at 96%
Or, it completes, but previews only one side of the PCB. like this... no PCB preview. #BugReports#
dreAn 2020-01-25 20:44:12 comment 3 0 Bug Reports
Why can't I get the LED assembled ? (dangerous bug, no warning)
I am adding some led's like: https://lcsc.com/product-detail/Light-Emitting-Diodes-LED_0603-Yellow-light_C72038.html/?href=jlc-SMT It is a basic part. Looks like: I export BOM, they are there: I try to order PCB, and in the "select parts" step, they are completely omitted in the list ! -A dangerous bug, one could easily place and order and get very incomplete PCB's. #PCB#
dreAn 2020-01-25 05:38:07 comment 6 0 PCB
How to make autorouter NOT mess up my copper area (power-tracks.)
How to make autorouter NOT mess up my copper area (power-tracks.) I have some power tracks made of copper area, - how can I make them survive autorouter, without autorouter using the traces for vias? #Skill#
dreAn 2020-01-25 03:45:45 comment 2 0 Circuit Design
How to find LCSC assembly parts? Much work in user-friendliness remain.
1: the BOM window is too narrow, (why is it so small anyway) - one can choose between seeing component value, or "LCSC assembly" column. so I find a part that is not there, and try to find a resistor like this: again, the window is too narrow, I can't find anything useful by searching for "10K" or "0605 10k" - so I open "resistors" 2: now there is a mess between "extended" and "basic" parts, how can I choose that I want a "basic 0605 10k" ? #GeneralDiscuss#
dreAn 2020-01-24 02:57:20 comment 3 0 Others
EasyEDA for Linux segfault before starting
Fresh installed, till now I've only used the browser version. This is on Ubuntu 19.10 andre@loke:/opt/easyeda$ gdb ./easyeda GNU gdb (Ubuntu 8.3-0ubuntu1) 8.3 Copyright (C) 2019 Free Software Foundation, Inc. License GPLv3+: GNU GPL version 3 or later This is free software: you are free to change and redistribute it. There is NO WARRANTY, to the extent permitted by law. Type "show copying" and "show warranty" for details. This GDB was configured as "x86_64-linux-gnu". Type "show configuration" for configuration details. For bug reporting instructions, please see: . Find the GDB manual and other documentation resources online at: . For help, type "help". Type "apropos word" to search for commands related to "word"... Reading symbols from ./easyeda... (No debugging symbols found in ./easyeda) (gdb) r Starting program: /opt/easyeda/easyeda [Thread debugging using libthread_db enabled] Using host libthread_db library "/lib/x86_64-linux-gnu/libthread_db.so.1". Program received signal SIGSEGV, Segmentation fault. 0x0000000000dbf060 in ?? () 0x0000000000dbf060 in ?? () (gdb) bt 0 0x0000000000dbf060 in () 1 0x00007ffff7d81072 in node::http2::Http2Session::Callbacks::Callbacks(bool) () at /opt/easyeda/libnode.so 2 0x00007ffff7d81135 in () at /opt/easyeda/libnode.so 3 0x00007ffff7fe102a in call_init (l=, argc=argc@entry=1, argv=argv@entry=0x7fffffffdda8, env=env@entry=0x7fffffffddb8) at dl-init.c:72 4 0x00007ffff7fe1131 in call_init (env=0x7fffffffddb8, argv=0x7fffffffdda8, argc=1, l=) at dl-init.c:30 #5 0x00007ffff7fe1131 in _dl_init (main_map=0x7ffff7ffe190\, argc=1\, argv=0x7fffffffdda8\, env=0x7fffffffddb8) at dl-init.c:119 #6 0x00007ffff7fd113a in _dl_start_user () at /lib64/ld-linux-x86-64.so.2 7 0x0000000000000001 in () 8 0x00007fffffffe134 in () 9 0x0000000000000000 in () (gdb) q A debugging session is active. Inferior 1 [process 17266] will be killed. Quit anyway? (y or n) y andre@loke:/opt/easyeda$ #BugReports#
dreAn 2020-01-05 23:12:17 comment 6 0 Bug Reports
Rather BAD EasyEDA + JLCPCB + SMT assembly experience
Please see files here: https://drive.google.com/drive/folders/1k18Cu3OPY8_nzICmUbo6Om4ODnvjpDmi?usp=sharing 1: BOM list in EasyEDA looks good, most parts selected from LCSC 2: exported BOM refers to 0603 packs as 0603' (correcting that does not fix step 3) 3: the uploaded BOM fail to find the parts... So I needed to choose all missing parts over again - the components I got to choose among, had wrong packages, and did not show the value in any place but the part number (for those who can decode it) Once that is completed, and everything thing is put into the "shopping cart" - one proceeds to payment. Should one, at any point, try to go back before paying, (to check/verify how many PCB's or SMT assemblies were selected, then BANG - the cart is empty, and you need to start over again !) Check my logs, I did it at least three times. So I am not sure I got the right parts, and this way every test batch could be inconsistent with the previous batch. (as different parts may be selected) #BugReports#
dreAn 2020-01-05 22:01:19 comment 8 0 Bug Reports
Unable to bring NPTH to front
BUG Concise problem statement: Steps to reproduce bug: 1.Create solid region layer, type = NPTH 2.create rectangle top-layer. 3.try to bring the NPTH to front. Results: unable to make NPTH appear over the top layer(or others) Expected results: NPTH to be on top. Browser: Cromium #BugReports#
dreAn 2017-04-16 23:39:22 comment 1 0 Bug Reports
in PCB view: Share button says "can't find your file"
Concise problem statement: When editing my "Connector 2" PCB, clicking share button gives an error popup. Steps to reproduce bug: Load "connector 2" PCB module, click share Results: and ugly, windows-themed (yuck) button. Expected results: some sharing options.. Browser:Chromium #BugReports#
dreAn 2017-02-11 23:49:48 comment 1 0 Bug Reports
wrong language on button
Concise problem statement: Chinese button. Steps to reproduce bug: go there: 1.In "Project", "module" I see list with #,User component, SCH/Footprint,.....EDIT 2.Click "Edit" Results: "Edit component" dialog that can change title/description, the green button has two chinese characters. Expected results: english "OK" , or "Save" ? Browser: Chromium #BugReports#
dreAn 2017-02-11 23:42:51 comment 0 0 Bug Reports
No photo view generated for PCB
BUG Concise problem statement: No photo view generated for PCB Steps to reproduce bug: load "Connector 2" from my account 1.click on "photo view" Results: empty photo view is displayed Expected results: a picture Browser: Chromium (but it's not browser related, as it worked at an earlier stage.) #BugReports#
dreAn 2017-02-11 23:25:52 comment 2 0 Bug Reports