Why is there no Lock in SCH
Why is there no Lock in SCH? #Schematic#
Multiple Select Objects
I want to delete only TRACEs. I select a part of the schema, check off unnecessary objects, and leave only the TRACE. I press DELETE, and all the selected objects are deleted, not just what I selected. #PCB#
Extensions in the EasyEDA PRO?...
And what about the extensions in the professional version? #FeatureRequests#
The internal web browser is not as user-friendly as the default browser.
The internal web browser is not as user-friendly as the default browser. It used to be better when clicking on the JLCPCB or LCSC buttons, when the familiar default browser, chrome or any other, was opened. Because it has tabs, tabs are more convenient to use than multiple open windows in an easyeda internal browser. Also, when you click on the ViewDatasheet - you need to open the default web browser too. Minimize the use of the internal web browser please. #FeatureRequests#
About "Out of Stock"
Hello. If on your site, in the component search section, You find "Basic" 100nf capacitor (LCSC Part # C14663), then there are 5850968 in stock. But on the LCSC website, the same capacitor is Out of Stock. I understand correctly that JLCPCB and LCSC have different component stores. And if I plan to do the SMT Assembly of Basic part, then first of all I should focus on the number of IN STOCK on the JLCPCB website. I'm right? #PCB#
API: api('select', {ids:['gge10841'] }); - not really selecting
api('select', {ids:['gge10841'] }); This API is Highlighting only, so Selected Objects is Zero #BugReports#
Components List
Is it possible to do something similar as in the picture? The point is to have a list of unique components with their names (like 1k, 100nf), and most importantly, so that you can select the corresponding components. (not just highlight, but select) #FeatureRequests#
Orthogonal routing like in Autocad with pushed Shift
Add the orthogonal routing of the tracks while holding down the Shift key, as in AutoCAD. It is also good if routing avoided sharp and square corners. #FeatureRequests#
BOM information according Supplier Part
1) It would be nice if values information (1kOhm, 100nF and the like) taken from LCSC according to the Supplier Part would be loaded into the BOM table. This is necessary so that before ordering Electronic parts, once again check that the Part Attributs: Name matches the actual value according to the Supplier Part. For example, I specifically changed 22pF to 220pF, and left everything else unchanged. EasyEda did not notice the spoofing, and even said that "This Component is Verified." 2) Also, please do Export BOM to cvs along with the price. #FeatureRequests#
About speed optimization...
Is speed optimization planned? I understand the JS script and HTML will never work as fast as C ++, but you can certainly improve something. And when there are about 1000 different elements in the PCB, it becomes very slow to work with EASYEDA. For example, use fewer objects and more arrays ... #BugReports#
I wish that when changing PACKAGE the corresponding elements are automatically selected
I wish that when changing PACKAGE the corresponding elements are automatically selected. https://yadi.sk/d/xnsdyelCRaLWvA #BugReports#
Stops opening the menu with scripts.
Stops opening the menu with scripts. Can this bug be fixed? https://yadi.sk/d/VDYXz_HMZhtD0g #BugReports#
Pad net highlighting
Previously, when you press Alt + LeftClick on the pad, the entire network was highlighted, along with connections, tracks and pads. Now this happens when you just point at some track. And it’s very convenient, thanks. But when you point only at the pad, then nothing is highlighted, but this is very lacking. https://yadi.sk/d/6IPtkY1X9hru5Q #BugReports#
It would be good if the tracks didn’t break during such a movement
It would be good if the tracks didn’t break during such a movement https://yadi.sk/d/Uk0bjV0D64bRfg #BugReports#
Please turn off the Unnecessary Warning about Unfinished Nets
Please turn off the Unnecessary Warning about Unfinished Nets. #BugReports#
It’s very difficult to select CooperArea when it is inside some kind of footprint
It’s very difficult to select CooperArea when it is inside some kind of footprint. https://yadi.sk/d/7xmHOeq-hj6pNQ #BugReports#
Previously, rotation was better.
Previously, rotation was better. There was no need to change anything here https://yadi.sk/d/Dcy1KEw_d0Rr-w #BugReports#
Share your own scripts and Extensions here.
Since the developers of EasyEda are not in a hurry to correct mistakes, I propose here to share our own scripts. I'll start with myself. [https://yadi.sk/d/MUeNNxXA4ULpLQ](https://yadi.sk/d/MUeNNxXA4ULpLQ) There are a couple of scripts and Extension, which automatically creates menu buttons from registered scripts. How to use ReNumberScript.js is written in: [https://easyeda.com/forum/topic/Copy-Paste-Dublicating-9185827a952e4312854e808ed38df228](https://easyeda.com/forum/topic/Copy-Paste-Dublicating-9185827a952e4312854e808ed38df228) #Skill#
I noticed one bug with the custom extension button.
I noticed one bug with the custom extension button. As it appears can be seen on the video: https://yadi.sk/d/brS16NDRpGn4VQ And it would be nice if it were possible to move this button, like other standard buttons through "Menu Setting" #BugReports#
Undo not working when...
When you move text from NetPort, and then you try to return it to the place by pressing the UNDO button, nothing happens. #BugReports#
PCB zoom 1000% BUG
I determined BUG. Bug occurs when you run this script -------------------- var json = api('getSource', {type: "json"}); api('applySource', {source: json, createNew: !true}); ---------------------- or in "EasyEda File Source" click to Apply button, If the PCB zoom is 1000% or more.If the PCB zoom is 750% less, then there are no errors! Please fix it! #BugReports#
SCH JSON object from the PCB?
Can I access the SCH JSON object from the PCB? #Skill#
API script editor and debugger
1) Let's create a separate forum section for questions related to API scripts. I would like more examples of various scripts, for a greater understanding of scripts for novice programmers. 2) Please show other more convenient ways of programming through the API. Maybe it can be through standard Google Chrome tools ... Or maybe there is some way to debug through some c ++ programming environment #Skill#
Copy & Paste Duplicating
Previously, it was possible to copy part of the scheme, and then paste the duplicate, then save the scheme, then go to the PCB and copy and paste the corresponding part there (already correctly placed), and if the changes were imported after that, then the scheme and the board became synchronized and the layout of the components on the board was preserved, which greatly facilitated the work. In new versions, this feature is gone. Since after importing changes, all new components are removed, and then added again, but in discord. Return this feature, please, as it was And it would be good if nets of new wires were automatically renamed after synchronization. Because earlier it was necessary to delete from it and anew to trace. #FeatureRequests#