asdasdasd
panelize: V-cut: what is the mechanical layer?
In the user guide it mentions that if I want a panelized PCB to be cut, I need to "If you need to v-cut the panelized PCB, you can draw a track on the mechanical layer". In the list of layers, I cannot see any "mechanical layer". Is it the same as the "board outline layer"? Should the v-cut be specified in both directions (horizontal and vertical)? Thanks #PCB#
fabiocannizzo 2019-03-22 04:39:45 comment 3 0 PCB
explain solid region
I see there are 3 types of solid region, solid npth and cutout. The tutorial describes its use with the attribute solid, as a small copper area to connect pads. What are the other two uses, cutout and npth? Thanks #PCB#
fabiocannizzo 2019-03-07 15:02:55 comment 1 0 Circuit Design
have a way to define a repeated subcircuit
Suppose I have a subcircuit which apperas many times inside a bigger circuit, it would be nice if there was a way to define its footprint only once. My use case is: I am drawiing a board where there are many 8x8 led matrices, each driven by a MAX7219. The connection between 1 matrix and its MAX7219 requires 16 connections. I would like not to have to repeat it manually for each matrix. I tried to achieve that with no luck both using new component or using sub-modules. Using modules, when I place many instances of a schemnatic module in a schematic, there is no way to decide whch net names are local to the schematic and which are global. Furthermore, when I convert to PCB, there is no way to make it use the PCB module corresponding to the schematc module. Using components, I get lot of conflicts with net names. Please find below an example using components. Example: I create a PCB-LIB with two resistors in series (name MYCOMP): padR1_1- R1 padR1_2 - wire - padR2_1 - R2 - pad_R2_2 I create a SCHEMATIC-LIB (name MYCOMP) with two pins\, associated it with MYCOM PCB created above\, and tie the two pins with pad_R1_1 and pad_R2_2 I create a new project and place two components of type MYSCH. Convert to the PCB Now the problem is that the internal component connection "padR1_2 - wire - padR2_1" shows a DRC error. Complicating a bit the example, let's say the schematic fro MYCOMP is defined using nets: NET_GND - padR1_1- R1 padR1_2 - NET_X1 NET_X1 - padR2_1 - R2 - pad_R2_2 when I place an instance of MYCOMP on a manin schematic\, I would like to control how the net names are expanded: I want that NET_GND remains unchanged\, so that it is global\, while NET_X1 is prefixed with a unique string to make it local\, so that it remains local of this schematic. For instance I could define this using question marks\, to mark nets which are local: NET_GND - padR1_1- R1 padR1_2 - NET_X1? NET_X1? - padR2_1 - R2 - pad_R2_2 Last it would e nice if when I define a new component like this, if I could choose for it to have global visibility ot project only visibility #FeatureRequests#
fabiocannizzo 2019-02-07 13:21:57 comment 0 0 Feature Requests
how to tie schematic-module with pcb-module
I have a sub-circuit made of a bundle of components, wires and pins. There are several instances of this sub-circuit in the main schematic. So I created a schematic module and a pcb-module. In the main schematic, I 'place' many times the schematic module. But how can I tie that with the PCB module, so that the PCB module is used when I convert the main schematic to PCB? #PCB#
fabiocannizzo 2019-02-06 01:19:54 comment 2 0 Circuit Design
understanding via diameter and drill diamater
Is there any documentation on via diameter and drill diameter, and how to appropriately choose them based on the track size and the copper thickness? Thanks #PCB#
fabiocannizzo 2019-01-31 05:48:53 comment 4 0 Circuit Design
store defaults trace width and via properties as part of the project
At the moment if I define in the PCB canvas attributes a default track width, this attribute is lost if the project is closed and reopen. It would be nice if this info could be stored as part of the project info. Same suggestion for via attributes. For via in particular, it would be nice to be able to specify the attributes in the canvas, like for track width. As explained here, at present the default properties are the ones last edited on a particular via, but, if I do not remember what is the last via created, there is no way to visualize them (of course I can create a dummy via and inspect its properties, but in my opinion it is not a natural way to operate). #FeatureRequests#
fabiocannizzo 2019-01-31 05:39:26 comment 0 0 Feature Requests
web site: search in forum topic only
This post relates to the easyeda web site. If I type somethign in the search bar, it seems to search everywhere in the web site. It would be nice if it was possible to limit the search to the forum questions, or, to selected topic in the forum sections. #FeatureRequests#
fabiocannizzo 2019-01-31 05:19:38 comment 2 0 Feature Requests
delete only one segment of a multi-segment schematic wire
When I select a wire in a schematic, often multiple segments are highlighted. Sometimes I would like to delete only one segment of the wire, not the whole wire. It seems this is not possible at the moment. It would be nice to have it. #FeatureRequests#
fabiocannizzo 2019-01-31 05:16:24 comment 2 0 Feature Requests
more zoom options
Currently it seems it is only possible to select one of the predefined zoom levels. I suggest the implementation of more way to zoom: - specify an arbitrary zoom level in a text box (e.g. 65%) - "zoom to selection"\, to include in the zoom only the content of a selection. - "zoom to mouse-pick"\, where I select with the mouse the zoom rectangle area. I work mostly with a touch pad, instead of a proper mouse, and not having these features makes it very hard to browse the drawing with the gestures available. Thanks for your consieration #FeatureRequests#
fabiocannizzo 2019-01-31 05:08:46 comment 4 0 Feature Requests
Error(parse.c--checkvalid): volprobe1: no such vector.
I am a newbie and I am trying to use the simulator to find the operating point on a simple circuit, which is supposed to generate a square wave on pin 3. Can anybody can please point me in the right direction? project name: led-matrix-tester SPICE NETLIST SquareWave_sim V1 +5V GND  5V R4 R4_1 R3_1  2M R3 R3_1 +5V  1k C4 GND C4_2  10n C3 GND R4_1  50n .param pi = 3.141593 .func LIMIT(x, y, z) {min(max(x, min(y, z)), max(z, y))} .func PWR(x,a) {(MAX(ABS(x), 1e-313))**a} .func PWRS(x,a) {sgn(x) * PWR(x,a)} .func stp(x) {u(x)} .func log10(x) {ln(x)/ln(10)} .func SQRT(x) {(MAX(x, 1e-313))**0.5} .func INT(x) {sgn(x)*floor(ABS(x))} .func URAMP(x) {max(x,0)} .func POW(x,a) + {(((a-(int(a)))==0)||(sgn(x)>=0))*( max(exp(ln(uramp(x))*a),0) + + (2*(0.5-ABS((int(a))-2*int(a/2))))*max(exp(ln(uramp(-1*x))*a),0) )} .control probe V(VOLPROBE1) quit .endc .END SIMULATION REPORT Circuit: gooduntitled Doing analysis at TEMP = 27.000000 and TNOM = 27.000000 Warning: singular matrix:  check nodes c4_2 and c4_2 Note: Starting dynamic gmin stepping Note: One successful gmin step Note: One successful gmin step Note: One successful gmin step Note: One successful gmin step Note: One successful gmin step Note: One successful gmin step Note: One successful gmin step Note: One successful gmin step Note: One successful gmin step Note: One successful gmin step Note: One successful gmin step Warning: singular matrix:  check nodes c4_2 and c4_2 Warning: Dynamic gmin stepping failed Note: Starting source stepping Warning: singular matrix:  check nodes c4_2 and c4_2 Note: One successful gmin step Note: One successful gmin step Note: One successful gmin step Note: One successful gmin step Note: One successful gmin step Note: One successful gmin step Note: One successful gmin step Note: One successful gmin step Note: One successful gmin step Note: One successful gmin step Note: One successful gmin step Note: One successful source step Warning: singular matrix:  check nodes c4_2 and c4_2 Warning: singular matrix:  check nodes c4_2 and c4_2 Warning: source stepping failed DC solution failed - Last Node Voltages ------------------ Node                                   Last Voltage        Previous Iter ----                                   ------------        ------------- +5v                                               0                    0 r4_1                                              0                    0 r3_1                                              0                    0 c4_2                                              0                    0 v1#branch                                         0                    0 doAnalyses: iteration limit reached op simulation(s) aborted Error(parse.c--checkvalid): volprobe1: no such vector. ngspice-26 done #Simulation#
fabiocannizzo 2019-01-31 04:54:20 comment 1 0 Circuit Design