asdasdasd
SMD parts paste mask not transferred to bottom layer
Before I placed a PCB order with JLCPCB this morning, I realized that some SMD parts (1206 resistors, standard footprint from the system library) which were placed on the bottom layer of my board design do not show up either in the "BottomSolderMaskLayer" nor "BottomPasteMaskLayer". When placed on the top layer, the very same components do have data on their respective solder and paste mask layers on the top. I had to manually add rectangular areas to the bottom layer to correct this. Are SMD parts not supposed to be placed on the bottom of a PCB? Is this a known issue or did I miss something? #BugReports#
fripholm 2020-01-03 20:46:26 comment 5 0 Bug Reports
Different amount of pins in schematic and on PCB?
Hi all, I have a schematic that I started a few years ago in EasyEDA that I need to make some changes to. The issue I'm about to describe used to work in earlier versions. There's an SPDT switch in the schematic that obviously has 3 pins - 2 switch poles and 1 common pole. For clarity that needs to display with three pins on the schematic. On the PCB on the other hand this very switch is only connected through a two-way connector because the common pole of the actual switch is wired off-board and there's no need for a third pin on the board. In earlier versions of EasyEDA I could import changes to the PCB without an error message. Now I'm getting "The pin number(s) can't find the same pad number(s)". The "Hidden pin" option doesn't do anything. How do I fix this? #GeneralDiscuss#
fripholm 2019-07-17 10:10:57 comment 5 0 Others
PDF Export not working for some projects
This has come up quite often here and it doesn't seem to be solved completely yet! I'm getting zero length file PDFs when trying to export them from a large project I'm working on. This happens in Firefox and the EasyEDA client. Is there any solution to this bug? #BugReports#
fripholm 2019-03-18 20:23:13 comment 2 0 Bug Reports
Editing copper area/solid region. How to add points?
In the current version, editing the copper area and solid regions is a major pain in the butt. Is there a way to add points with the mouse without going into the EDIT POINTS field and entering them manually into text boxes? This used to be pretty easy. Why has this been changed?? #PCB#
fripholm 2018-07-06 19:15:31 comment 1 0 Circuit Design
5.5.11 breaks subpart functionality
I have a schematic and a corresponding PCB which was originally designed in an earlier version of Easyeda. It contains several opamps like NE5532 where the two halves of the dual package are dropped into the schematic as separate subparts, like U1.1 and U1.2. Until now everything worked fine when updating the PCB, but now I'm getting an error "The pin number(s) can't find the pad number(s)" for each and every opamp and comparator in this project. Did you change how this works in the new version or is it just a plain bug? #BugReports#
fripholm 2018-06-02 08:24:48 comment 8 0 Bug Reports
PCB editor: 'Save As' with new name within the same project doesn't work
I usually save newer versions of my PCB layouts with the actual date in the name within one project\, i.e. yesterday it was "PCB_2018-04-01" and today I would save a newer version as "PCB_2018-04-02". I can't do this anymore in v5.3.14 - when I click "SAVE AS", I'm getting a box asking for a name. I change the name and click SAVE. The file is saved but the older file is overwritten and the name does not change. Only workaround at the moment is to clone the file and give it a new name before editing... #BugReports#
fripholm 2018-04-02 10:27:17 comment 2 0 Bug Reports
Component values not updating in PCB editor
Hi, let's say I need to change a resistor value from in an existing schematic. It updates fine in the schematic editor and the schematic is saved to the server. Next step is loading the respective PCB in the editor. I press IMPORT CHANGES - but the changed resistor value won't update, unless I have - for instance - rotated the resistor by 180 degrees. Rotated components update fine, untouched components won't. This worked fine in earlier versions, so I think it's a bug. #BugReports#
fripholm 2018-03-15 11:47:53 comment 3 0 Bug Reports
All my work is gone!!
Hi, last week I started my first project here and I didn't have the time to work on it for the last days. Today I was trying to open my work but it seems to be gone! Nothing is shown in "Fripholm's Projects". What happened? I don't want to start over again. #Schematic#
fripholm 2015-03-31 10:59:47 comment 2 0 Circuit Design