Looking for a sturdy USB-C connector part for SMT assembly
So far, I've used this part, but when the assembled PCB arrived, the structural support legs / wings of the connector were not soldered, and the whole connector looked to be only attached to the USB pins. Is there a similar connector that would get attached to the PCB with extra strength? #SMT#
Autorouter hangs on a round board
I have a very small project here: http://easyeda.com/ivoras/legljiva4 ...and the autorouter hangs while routing it. I'm using the latest version of the local router, the error messages are: Simplex.calc_division_lines: division not found Simplex.cutout_from: division line is null AutorouteEngine.autoroute_connection: Exception in maze_search_algo.find_connection #PCB#
Package error - please check components packages
This error happens all the time - I thought it was a temporary bug, but no - it appears on all the projects I did, old and new. Here's how it goes: Create a new project, new schematic Add a few capacitors, for example in my recent case it was LCSC component C118884, connect them into a circuit, save the schematic Make a PCB from it, place the components, save it Change something in the schema, e.g. add a resistor, connect it to the circuit, save it In the PCB, click "import changes" from the schema, everything goes ok Now, close everything and log out Open the same schema again, open the PCB In the PCB, click "Import changes" from the schema The bug happens - suddenly it cannot find the packages from 5 minutes ago. This happens all the time. #FeatureRequests#
An attribute which prevents the autorouter from deleting tracks
Feature Request Brief title for your desired feature: An attribute which prevents the auto-router from deleting tracks before it starts How would you like the feature to work? Among other attributes of a track, a new attribute, possibly named "Locked" or "Sticky" could be added, which if set to "ON", would prevent the autorouter from deleting the track before it starts. This attribute's function could be combined with the "Lock objects" feature request: https://easyeda.com/forum/topic/Lock_component_location_on_PCB-BtnFXR9rI Why is this feature important to you? Many times, it is important that some tracks go a specific way and they must be manually drawn. Then, for the rest of the routes where it doesn't matter where they go, the autorouter can continue. The autorouter must not modify tracks which are locked like this. #FeatureRequests#
Ratlines are buggy and autorouter gets confused
BUG Concise problem statement: When trying to autoroute and then cancel it, then move a components, there are bugs: 1) when components are moved, ratlines are doubled: one remains at the old position, one at the new 2) the autorouter sometimes routes to the components' old positions, and sometimes to both old and new position 3) when doing so, the router completely ignores spacing, routes through pads and components, creating short circuits everywhere. Steps to reproduce bug: create any schematic and PCB try to autoroute PCB, cancel it try to move components around and see the ratlines are buggy, try to autoroute after moving Results: both ratlines and the autorouter don't work Expected results: ratlines and autorouter should work as before Browser: Chrome #BugReports#
Saving PCB footprint / component
Feature Request Add an option to save the currently selected component / footprint in the PCB editor as a favourite or user-specific component. How would you like the feature to work? I often modify the components in the PCB editor to change hole diameters and pad sizes. And since those are reset every time changes are imported, I need to do it all from beginning. If I can save a modified part footprint directly from the PCB editor and use it, this can be avoided. Why is this feature important to you? Very much, since a lot of footprints have too small holes or too large pads. #FeatureRequests#
Better Parts dialog
For the last few day something happened with the LCSC parts, at least resistors and capacitors: the resistors are suddenly unsorted which makes it very difficult to search for! Previously, they were ordered by package size and resistor values. The SMD "general capacitors" list was suddenly cut down and lists less than 10 capacitors, where there should be thousands! Both issues are currently unresolved. I'd like to suggest some additional features: The ability to sort the parts table by clicking on the header, so parts can be sorted by package, values, voltages, etc. The ability to filter by some of these columns, so we can only show 0805 components, etc. The ability to filter by some value of the currently selected part. E.g. right-clicking on the current row in the parts table could offer "filter by current VALUE" and "filter by current PACKAGE", etc., so for example we easily search for all 10kOhm resistors of any size and manufacturer, etc. EasyEDA is a great idea and a very useful project, thank you! #FeatureRequests#