asdasdasd
N-channel mosfet level converter won't simulate
I'm trying to replicate one of the most common bi-directional logic level converters: And my Implementation looks like this: Simulation model for BS170: .SUBCKT BS170 1 2 3 * 1=drain 2=gate 3=source Cgs 2 3 12.3E-12 Cgd1 2 4 27.4E-12 Cgd2 1 4 6E-12 M1 1 2 3 3 MOST1 M2 4 2 1 3 MOST2 D1 3 1 Dbody .MODEL MOST1 NMOS(Level=3 Kp=20.78u W=9.7m L=2u Rs=20m Vto=2 Rd=1.186) .MODEL MOST2 NMOS(VTO=-4.73 Kp=20.78u W=9.7m L=2u Rs=20m) .MODEL Dbody D(Is=125f N=1.023 Rs=1.281 Ikf=18.01 Cjo=46.3p M=.3423 + Vj=.4519 Bv=60 Ibv=10u Tt=161.6n) .ENDS I've tried this with every n-channel FET with an available simulation model, even with the BSS123 from the Common Library, but every time I add any of these components to the circuit, the simulation gets stuck in processing and finally returns a gateway timeout error. Removing the component from the circuit runs the simulation succesfully. My transient simulation parameters are: .tran 0 1m 0 1u #Simulation#
jfor 2024-10-03 14:31:24 comment 10 0 Circuit Design