Associated model not detected
Model: https://oshwlab.com/jonasforssell/mosfettest I get a warning message saying XM2 is not associated with any model. I am not sure why the associated subcircuit is not detected in this model. I have used Andys generic N-FET model as a starting point (why is this not in the default library?) The strange thing is that I remember it used to work so I must have made some small error. Many thanks for any assistance. /Jonas #Simulation#
Tips for further enhancements of EasyEDA
Thank you for easyEda! This is not the most powerful PCB designer out there, but it has a number of very good advantages: 1. It runs in the Browser. Far superior to having a local installation! 2. It has a thight connection to JLPCB and LCSC 3. It is free Now here are some suggestions for the future: - Drop the standalone version. It only takes valuable resources from the team which should help out on the cloud version instead. It would also eliminate any need to keep the versions in sync. - Enhance the connection to JLCPCB. Right now I need to extract all three files (Gerber\, BOM\, Pick-and-Place) and upload by hand. How about a one-click solution for this? - Allow for "basic parts" to be an option from the JLPCB library selection. For many components\, this is a way to keep the costs down so that is a really appreciated option. - Simplify. Try to reduce the number of commands even further. Arc\, Bow and Circle are all variations of the same theme... - Enhance the version handling with versions\, branches and merge possibilities. Have a look at Onshape which has very graphic world leading implementation of this! - Allow two people to be able to work on the same (cloud based) design simultaniously. Once again\, have a look at Onshape to see how well this can be done. Finally, I would like to thank you for the always kind and prompt support. In particular from Andy! Keep up the good work! /Jonas - Sweden #GeneralDiscuss#
Solid area not recognized by autorouter
Hello again! I have a four layer PCB where I have placed a solid area in layer 2 to help conduct current from several vias. I have also modified a MOSFET footprint and added vias to it to connect to this layer. Several mosfets with this footprint is placed on the PCB. Both the vias and the solid area have been correctly assigned the same net in the PCB and they overlap. The mosfets are placed on the bottom layer (4), I now start the autorouter. It solves the routing quickly when I restrict it to operate on only the top and bottom layers (1 and 4) while fails when I include layer 2 as well. In both cases the autorouter fails to use the solid area to conduct current from the vias. Instead, it connects all the vias separately on the bottom layers with separate traces. Is there a way I can make the autorouter understand that the vias (which are multilayer) should connect to the solid area and avoid routing separate traces? Grateful for any help. #PCB#
Control autorouter via pöacement
I need to limit the use of via to a certain area of my board. Is there a way to control the auotorouter in order to achieve this? /Jonas #PCB#
Multiple designs in one project?
Hello, I have a project which consists of three boards which are interconnected with wires. Is it possible to design these three boards with schematics and related PCB:s in the same project or should I divide them up into three projects? I tried several schematics in the same project but it did not seem to generate different PCB:s from them. Thanks /Jonas Forssell #PCB#
Change an arduino board layout
Hello, I have designed a board based around an Arduino Mega shield. The new board is larger than the shield, so I must find a way to remove the outline in the shield template U1. Otherwise, it will leave me with two outlines which is not acceptable. How do I remove the Arduino outline? It seems to be a part of the U1 footprint. Thanks! /Jonas #PCB#