Edge Plating PCB
Good day I have an application where I am needing to edge plate the edge of my PCB. So far what I have done is to place Through-hole plated slots along the edge of my board. This looks like it will work alone the straight but where there is a curve which I need to follow is going to be too many slots to achieve the desired curve. I have looked through setting as was hoping to find something that io could just place a copper region along the edge of the board and just specify plating. Does anyone have any suggestions on how to do this in EasyEDA. I have a public project "touch plate" Jono #PCB#
Oval PAD shape incorrect in Export
Oval PAD shape incorrect in Export I Made this component for a switch I use. Whenever I make components I like to print out a 1:1 to test before continuing. I noticed that when exporting the PADS swell excessively. Steps to reproduce bug: Change PAD to oval The attached images show using round rectangular and Oval The Round Comes out correct. The Rectangular is correct. The Oval is too large I have tried with a slot and with a hole. I have tried various combinations but always get larger when printing (export) Results: Expected results: Browser: Chrome https://easyeda.com/editor#id=509936274db5436291dd72c1a27fdf77|3393824ffcc24614bbfd0130e38f1aa5|_41db11bb9e64408f8af2f1150bd9299f|_b2b42447b14a4a739e1e52a073bdf5ba|_0ebd813223704c2d9deab1e23739eddd|_2d1b81acef464f128bc9b9034fc89bb0 I am fairly new to Easy EDA but not to PCB design. Am I missing something or is this a bug. My project should be public. #BugReports#