via in solid region
A via placed in a solid region does not automatically have its net set to the net of the solid region. The via will have the same net as the via which most recently had the net changed manually, or to no net at all if no net of via has been changed. A via placed in a track has the net of the via automatically set to the net of the track. The same thing should happen when a via is placed in a solid region. #BugReports#
solid region net merge
If there is a solid region which touches any pads or the middle of a track, easyeda does not merge the nets. The solid region will have a different net than the pads and tracks. There will be yellow Xs where they touch. Pads connected with a solid region will have a ratline as if they were not connected. This can be fixed by manually changing the net of the solid region to match the tracks and pads. But if you make some change which requires updating the net names, the net of the solid region will not be updated with the other nets, and will have to be fixed manually again. If a solid region touches the end of a track, easyeda merges the nets correctly. But only if the solid region touches the end of a track, not if the solid region touches the middle of a track. #BugReports#
how to use modules
easyeda has two kinds of modules: pcb modules and schematic modules. The best way to use modules is to create a schematic module and a pcb module which match each other, which both represent the same circuit. Easyeda does not remember which schematic module matches which pcb module. There is no way to link a schematic module to a pcb module so that both are automatically used together. You have to know and remember which schematic module matches which pcb module. A schematic module matches a pcb module when each component exists in both modules and each component has the same ID as the matching component in the matching module. The ID is something like 'ggeaa533d14f6bd16db'. The best way to create matching schematic and pcb modules is to create both from the same project. Create project. Create schematic. Create pcb from schematic. with project open in editor, select schematic tab. file -> save as module save as schematic module dialog box opens, with default name of sheet 1. Change the name and save. with project open in editor, select pcb tab. file -> save as module save as pcb module dialog box opens, with default name of 'PCB_' plus project name. Change the name and save. To use modules: start new project. With editor showing schematic, click library on left. dialog box opens. set search engine to easyeda. set types to sch module. it should display a list of schematic modules you have saved. select the module you want to use. click place. Easyeda displays a dialog box asking for a prefix. Type 1-5 letters for the prefix and click ok. Remember the prefix because you will need it again when you place the matching pcb module. Use the mouse to place the schematic module. After you place the schematic module easyeda will prompt for another prefix to place another copy. If you do not want to place another copy, click cancel. Save schematic. Create pcb from schematic. The components in the schematic will be in the pcb, in the wrong place. With the editor showing the pcb, select the components from the schematic module. You can select many components at once by using the mouse to drag a box around them. edit -> delete. With editor showing pcb, click library on left. dialog box opens. set search engine to easyeda. set types to pcb module. it should display a list of pcb modules you have saved. select the pcb module which matches the schematic module. click place. It should display a dialog box asking for a prefix. Use the same prefix which you used for the matching schematic module. use the mouse to place the pcb module. After you place the pcb module easyeda will prompt for another prefix to place another copy. If you do not want to place another copy, click cancel. Save pcb. #Skill#
update pcb and rename track nets
When editing a schematic, there is a command design -> update pcb. When editing a pcb, there is a command design -> import changes. These two commands do the same thing, but have different names. Both commands should have the same name. This will make easyeda less confusing and easier to learn. I suggest that both should be changed to 'update pcb from schematic'. When updating a pcb, there is a dialog box, and the dialog box includes an option to rename track nets. When placing a pcb module, there is a dialog box to enter module prefix. The option to rename track nets should be added to the module prefix dialog box, because users often want to rename track nets when placing a pcb module. #BugReports#
clone does not include attachments
I created a project with description, schematic, and pcb. I attached a file with notes about the components and the reasons for including the components. From personal workspace, showing list of projects, click clone. New copy of project has description, schematic, pcb; does not include attachments. From personal workspace, showing list of projects, click home page, click clone icon at bottom of page. No new project appears in personal workspace. From personal workspace, showing list of projects, click open in editor, from schematic tab, click file, save as, new project. New project is schematic only, has no description, no attachments, and no pcb. From personal workspace, showing list of projects, click open in editor, from pcb tab, click file, save as, new project. New project is pcb only, has no description, no attachments, and no schematic. I am using web version of easyeda in firefox 78.15.0esr (64-bit) on linux. Cloning a project should include the attachments. Save as new project should clone a whole project, not just the schematic or pcb. #BugReports#