LED selection for a ceiling fixture, SMT assembly (JLCPCB Extended Parts)
Hi! I want to design a PCB to replace the light fixture in my ceiling fans, and I'm having trouble choosing what LEDs to use. I'm looking for RGB + Warm White, and because the board will be inside a diffuser, I think it would be more effective to use individual Red, Green, Blue and Warm White LEDs, rather than RGB LEDs. But, I'm having trouble finding appropriate parts at JLCPCB. I've tried looking for size 5050, 5730 and 3528, but I was unable to find Red, Green, Blue from the same manufacturer and the same size! It may be my own fault, or a problem with the search engine, or the data entry. I know previously I have had dive all the way into the data sheet to find the color of LEDs in the library, the color was completely missing from the description of most LEDs. This time I spent a good hour looking around but I have just not been able to complete the mission. So, I'm asking for help here. Can anyone recommend appropriate R, G, B LEDs to use for my application? #GeneralDiscuss#
Copper Areas and PCB modules
Hi! I'm designing a PCB heavily using copper areas and PCB modules, and I've discovered two problems. On a 4K monitor, any time a copper area overlaps a component, it's incredibly difficult to select the copper area with the mouse, because you have to hit a pixel on the dotted line exactly. If you don't, you select the component instead. It would be great if we could select the copper area by clicking a few pixels around the dotted line. When first adding PCB modules to a PCB, you have to use Import Changes and check the "Also update track's net" option to append the prefix to the track names. This works for tracks\, but it doesn't apply to copper areas! I think it should. If you have a copper area in your module\, it should be treated the same way as a trace\, because really\, it _is_ a trace\, just with a funny shape. I'm using 6.4.20.6. #BugReports#
JLCPCB SMT order submission down?
Hello, I'm getting the following error when trying to upload BOM/CPL: Incorrect format File parsing timeout. Please try again later. I'm getting the same error also when uploading earlier designs so I'm sure it's not actually the files.. plus the files are created with EasyEDA. :) #PCB#
DFM analysis warning - Pad to Pad Spacing is too lange
Hi there! I've ordered a few PCBs with SMT assembly by now (for example order W202104121326802). I only just noticed this now, but it seems that any time I use SMT LEDs, I get a warning that "Pad to Pad spacing is too large". The parts in question are LCSC part number C2296 and C2297 from Hubei KENTO Elec, the footprint is LED_0805, and the data is from the JLCPCB assembled section in the library. I downloaded both PNG files (original and corrected placements) and overlaid them in photoshop and compared, and they are identical! No parts have been moved. Also, all my boards have worked fine, with perfect component placement. So, I don't really see a problem, but I keep getting this warning. Is this a bug? Wrong data in the library? The EasyEDA version I used when designing the last board is 6.4.19.3. #PCB#
Order History - Shipment Tracking not working
Hello, I just wanted to let you know, Order History - Shipment Tracking has been down for a few days. #PCB#
SMT Basic Library NAND gate
Hi! I have not been able to find a NAND gate (7400 or 4011) in the basic library. I can find the AND gate (7408) but try as I might, there doesn't seem to be a NAND gate. Did I miss it? It seems strange, since the NAND gate is one of the two most basic discrete logic circuits (the other being NOR). Any other logic function can be built with just NAND gates. So, it would have made sense for it to be in the basic library :). Any recommendations / thoughts? #PCB#
No Connect Flag Stroke Color not saved
Simple, easily reproducible bug report: Stroke Color is not saved on the No Connect flag. You can change the color, and the color is reflected in the schematic.. but when you save, close, and re-open, it is again the default #33cc33. EasyEDA 6.4.7 - Projects Offline mode. Best regards, ///Leif #BugReports#
Renaming Components (changing prefixes) while keeping Schematic->PCB in sync
Using EasyEDA desktop 6.4.7 projects offline mode I've managed to link my old schematic/pcb to the point where Update PCB now reports that they match. Project file here: https://www.dropbox.com/s/14nh9y9uorqsc38/Pool%20Light%20Controller%20V1.zip?dl=0 Now, I want to rename some components, for example J10 should be LED1A, J9 should be LED2A, so that I get the correct labels on my circuit board. It seems that depending on whether I manually connected the nets starting from the MOSFET (Qx) or the connector (Jx), the name of the net will be different. If I started on the MOSFET (back when I made the schematic), and today manually rename J10 to LED1A in both the schematic and PCB, then they will both track, and Update PCB detects to changes. On the other hand, if I started on the connector and do the same thing, then Update PCB will lose the trace. I worked around the project by using a text editor and very carefully searching and replacing one by one, but this is fraught with peril because J1 is a short identifier and there can be false positives in base64 encoded data. Also, the layout of the files are really not conducive to text editing as there is no human-readable layout and no line breaks whatsoever... My schematic is fine now, but it would have been so much better if the rename function did this automatically! I'm sure this has been requested before, but I'm am doing it too, to perhaps help illustrate that this is a real issue. Thank you for otherwise excellent software! #FeatureRequests#
How I worked around the Import Changes issue (not a bug report)
Hi guys! This is not a bug report! The issue has already been reported. Rather, this is a description of how I managed to work around the issue. I'm posting it here because it's where Iwould have looked for it if I ran into this issue, so I feel it's more likely that it might help someone here. That said, if a moderator wants to move it, I'm sure they will. ;) First a bit of background: I'm a programmer with 25 years of experience who played with electronics as a kid, and I just started getting into electronics again a year and a half ago -- at a very different level compared to when I last did anything. So, this is the very first PCB I designed, just last year. That puts me squarely in the novice category. This was also the very first time I used EasyEDA. The purpose was to make a linkable RGB light controller for my pool under construction, where I could address each light separately. Through some unlikely miracle, I got the schematic right the first time, so I never actually tried to use the Update PCB feature until now, post 6.3.39: https://easyeda.com/page/update-record-v6.3 After a short circuit burned off a trace on one of my boards, I learned that fuses would be a good thing, and that's why I'm revisiting it now. So.. of course Update PCB now makes a mess of things. When I first designed the schematic, I paid no attention to labels. The connectors were named J1, J2, J3 etc. I didn't notice that until I was done with the PCB routing (obviously completely manually), and only then did I start renaming things, in order for the board labels to look correct. I renamed J1, J2 to LED1A, LED2A etc like so: This is what came back to bite me now that I tried to use the Update PCB feature. Of course EasyEDA had no idea what to make of it! I attempted to resolve the problem by renaming the parts in my schematic to match the PCB, like so: I thought I was doing great, but EasyEDA did not agree, and returned the following types of changes when I tried to update the PCB: Apparently the nets are named based on the previous names of the components! Dang it. So, I started over from backups, and this time I named the PCB components back from LEDXX to their original J1, J2, J3 names. Guess what -- problem solved! SWEET! Now the next step is to make a new backup of these files and then, now that things are hopefully linked with UUID's, maybe I can rename them in the schematic and update it into the PCB without things falling apart. And then, maybe I can actually add those fuses. Hope this is of use to someone. Best regards, Leif #BugReports#
Unable to open either PCB or Schematic from project pane
Hello, I created a schematic + PCB in 6.3.43 and the files have not changed since I last worked with them (according to Dropbox). I upgraded to 6.4.7 today, and for some reason, if I "Open Project", I do see the schematic and the PCB in Opened Projects.. but I can't open them! Double-click or right-click/open does nothing. There is no error message. If I open the PCB and the schematic by File / Open / EasyEDA then both files open.. but if I then save them to a new project, I cannot open them from there either -- nothing happens, it's like it ignores the command. "Update PCB" also does nothing. "Import Changes" does something, it starts the Loading screen with the quickly filling progress bar, but it just empties again, and fills again, and repeats forever. (I waited several minutes -- normally this is very quick.) I tried uninstalling 6.4.7 and reinstall 6.3.43, and I now see the exact same problem. I can't open my project! Could anyone take a look and see if you can reproduce it? Here is a backup of the project. https://www.dropbox.com/s/fqqq4ur451uk3e6/PWM%2064ch%20LED%20Controller%20-%20can't%20open%202020-09-19.zip?dl=0 Thanks in advance for any help. #BugReports#