API Tutorial
Why the following code does not add an arc to a schematic lib?: api('createShape', { "shapeType": "arc", "stroke": "#8D2323", "stroke-width": "1", "cx": 400, "cy": 300, "rx": 20, "ry": 20, "start-angle": 0.1, "end-angle": 2.7 }); Thanks! #Schematic#
API Tutorial
Why the following code does not add an arc to a schematic lib?: api('createShape', { "shapeType": "arc", "stroke": "#8D2323", "stroke-width": "1", "cx": 400, "cy": 300, "rx": 20, "ry": 20, "start-angle": 0.1, "end-angle": 2.7 }); Thanks! #Skill#
gerber-viewer.easyeda.com incorrectly displays holes with negative coordinates in DRL file
BUG Concise problem statement: DRL files may contain holes with negative coordinates. While generating Fabrication output DRL files EasyEDA overwrites the first leading "0" with "-" sign when hole coordinate(s) is (are) negative. When such DRL is viewed using gerber-viewer.easyeda.com all holes with negative coordinates are displayed 10 times further away from the origin than supposed. Steps to reproduce bug: Load any fabrication output with DRL file(s) containing holes with negative coordinates. Results: Watch the holes with negative coordinates displayed far away from their expected locations. Expected results: Holes displayed at their normal locations as specified in the original design. Manual fix: Open DRL file(s) with any text editor, find all "-" and replace with "-0", save and reload the fabrication output. Watch the holes displayed in their proper places (unless the design is larger than 10' in one or both dimensions). Browser: Chrome #BugReports#
"Fit in Window" function does not work on certain incorrectly designed footprints
BUG Concise problem statement: "Fit in Window" function does not work on certain incorrectly designed footprints Steps to reproduce bug: Go to "More Libraries", find "vssop-10" by Ohyeah "vssop for dac7574" and hit "Edit". Change zoom to anything and hit "Fit in Window" Results: does not re-scale to fit the part Expected results: fitting footprint in window Browser: Chrome Workaround: Go to "Easyeda Source", find text: "DIMENSION~3~M404,299L404,309M0,0~gge52", "DIMENSION~3~M404,309L413,309M0,0~gge53", "DIMENSION~3~M413,299L413,309M0,0~gge54", "DIMENSION~3~M410,299L413,299M0,0~gge58", "DIMENSION~3~M404,299L407,299M0,0~gge59" replace this text with something like: "TRACK~1~3~~410 299 413 299 413 309 404 309 404 299 407 299~gge59" hit "Apply" - now function "Fit in Window" works as advertized. One more note: the pin numbering on "vssop-10" by Ohyeah is wrong. Renumber pins 10,9,7,6 as 6,7,9,10. #BugReports#