Net Class Manager - Colors
EasyEDA Pro V2.1.51 I defined net classes in Net Manager, and I somehow assigned colors to the different classes, which is great. Problem is now I want to see layout colors defined for top or bottom layer, not classes. How do I go about editing this feature back to the top/bottom colors? Thanks. #PCB#
Cannot move certain PCB traces after autoroute
EasyEDA Pro - Version : V2.1.49.573a4102.674264 BuiltDate : 2024-01-30 After autorouting, some tracks cannot be moved. This is with both internal autorouter, and Freerouting, though Freerouting seems to have more of those type of tracks. Here I show a highlighted track segment that I wish to move to the right. Nothing happens when I try to "grab it" with the mouse. I can delete the track or the segment and reroute manually, but that will be fairly time consuming. Is there a reason that some track segments cannot be moved? Other tracks and segments can be moved easily, and rubber-banding completes the connection. Thanks. #PCB#
DRC errors... EasyEDA autorouter, (also freerouting)
(“Version : V2.1.49.573a4102.674264 BuiltDate : 2024-01-30”) I am having difficulty with EasyEDA-PRO in Half Offline mode. Hoping that someone will point out with what settings I need to correct, or if you are seeing the same issues. The planned PCB is a 2 layer board. In particular the DRC is detecting spacing failures after autorouting (internal EasyEDA, or Freerouting), even with what I think the correct parameters have been applied. Should the autorouting layout not provide appropriate spacing between traces, vias, pads etc, or do I need to move stuff by hand afterwards? I realize I will need to re-route certain traces etc, however has anyone seen similar results like what I am seeing below? Thanks. [I was also getting DRC spacing errors for pad spacing on a Micro-USB connector (C2972784), however that error has somehow disappeared today... with no apparant changes applied to the settings] Here is an example with results of Freerouting autorouter (similar results for EasyEDA autorouter): You can see from the above, that vias are placed too close to trace, traces routed too close to component pads or slots. Here are the PCB layout parameters: The following is the DRC Rules (I modified to match JLCPCB capabilities for 2 Layer PCB) Safe Clearance Design Rules settings: The above settings were selected based on JLCPCB Capabilities for 2 Layer PCB. See JLCPCB capabilities: https://jlcpcb.com/capabilities/pcb-capabilities Track Physics Design Rules settings: Via Size Physics Design Rules settings: #PCB#
BOM component stuffing option for SMT assembly (EasyEDA PRO)
Hello, I have two questions regarding optional components for pcb assembly: 1. Trying to, for instance, to define which 0 Ohm resistors (or other optional components) to not be assembled on the PCB. How can I do that? There does not seem to be such a feature. Example, how do I have C2 not included in the PCB assembly? Is the only way to edit the BOM quantity and designator? Comment Designator Footprint Supplier Part 47nF C1,C2,C5 C0603 C2762284 2. Is it possible to have 5 PCB assembled with one set of BOM, and another 15 PCB (same physical PCB design) with another set of BOM, thus creating two stuffing options on the same total quantity of 20 PCB order? Thanks for the help. #Schematic#
BOM component stuffing option (EasyEDA PRO)
Hello, I have two questions regarding optional components for pcb assembly: 1. Trying to\, for instance\, to define which 0 Ohm resistors (or other optional componets) to not be assembled on the PCB. How can I do that? There does not seem to be such a feature. 2. Is it possible to have 5 PCB assembled with one set of BOM\, and another 10 PCB (same physical PCB design) with another set of BOM\, thus creating two stuffing options? Thanks for the help. #Schematic#
Componets end up being off-grid
I am finding that some of my components are off-grid after manipulating them on the pcb. I noticed at times that the grid and snap size had changed in the property. I put it back as I had it. My settings are: Unit mm Grid Size 2.54 Snap Size 1.27 Alt Snap Size .064 (had entered .0635) How to I get the components back on-grid? It causes some issues with connecting the traces to the pads, as things are not perfectly aligned. The autorouter hangs (EasyEDA program freezes) when using the autorouter... might be another issue or related. Thanks. #PCB#