Importing Net Names from Schematic are messed up
I have several nets identified by IN and OUT net connectors. At some point after editing the schematic, when trying to update the PCB, the PCB the update insists on changing the net names of the various component pins to different net names than those assigned in the schematic. This behavior appears to be a new bug. I didn't have a problem previously. I am currently using v2.0.31. I have tried renaming the nets in the schematic, and have even deleted the net connectors and placed entirely new ones. The update function insists on using the older incorrect net names. Nothing I do seems to erase this memory of what are possibly older net assignments. Besides fixing this bug, can you suggest a work around? UPDATE: If I update the schematic from the PCB, it says they both are the same. It is only updating the PCB from the schematic that is the problem. I can see how the nets for the traces can get messed up when updating, but the nets for the pads should always match the schematic nets. #BugReports#
Change distribution tools to anchor to first component selected
Currently, the tools for distributing footprints equally distant take no consideration of current placement. Put another way, suppose you have three objects you want to be distributed horizontally. When the tool is used, all three components move. When some components are already placed and routed, this adversely affects their placement. A far better way to handle this operation is to keep the footprint that is selected first (or possibly leftmost in the case of horizontal distribution) in the same position, moving only the remaining ones selected. This will allow the anchor component to remain in its correct location. #PCB#
Pressing ESC key exits full screen
In the browser, pressing F11 will put the browser into fullscreen mode. In the Pro version, doing so sets the ESC key as an exit. The problem is the ESC key can also be used to exit trace operations, which is undesirable. There is no need to provide an F11 shortcut for fullscreen mode as the browser supports it already. If for some reason you want to leave this feature in, please change the key to leave fullscreen mode is also F11. #PCB#
Updating 3d models in schematic
I recently converted a project to the pro version from the standard version. When I tried to update the PCB from the schematic, the update was going to remove many of the 3d models from the standard components (basic parts in the JLCPCB site). I can't find anything to update these components so that the 3d models aren't removed. I tried "Design/Update Project Library" but this action is irreversible and I have no idea what it does. The documentation seems to be out of date and all the pictures of menus are in Chinese. Please advise how to handle this situation, and consider updating the documentation. #Schematic#
BUG: PCB Layout is very slow when converting from 2-layer to 4-layer
I recently cloned an existing project and when I edit the PCB it is really slow to move objects. I have rebooted my computer with no improvement. I also tried the same edits on the project that I cloned from and it works just fine. I am not sure when the slowdown happened. I suspect it happened after I deleted the existing copper pours, but it could have been something else. Is there a way to fix this problem for this project? I have never had this happen before, and it is a problem only for this particular project. UPDATE: I have tracked down the reason for the slowdown. It was when I converted the PCB from 2 layers to 4 layers. I tested pasting several components at once into the 2 layer version and it was instant. When I tried in a brand new copy of the 2-layer PCB converted to 4-layer, the paste took 40 seconds. Is this a bug? UPDATE 2: I have discovered two things: 1. There is a bug when converting a 2-layer board to a 4-/ayer\, it results in a big slowdown of any edits. 2. The workaround to this bug is to create a new 4-layer PCB and copy/paste parts & traces from the 2-layer PCB to the 4-layer PCB. #PCB#
Add merge tracks
I often end up extending a track after it has already been laid in order to make or fix a connection. The result however is two tracks, where only one track would be preferred. I would like the following feature: Select two connecting tracks. Right-click and select "merge tracks". The two tracks are now joined into a single track. #PCB#
Selecting a net in PCB changes view location
When selecting a net in the design manager in the PCB editor, the PCB will pan to another location on the PCB than the current view. The problem is when you zoom into a particular part of the PCB, then select a net to see what is routed and the window is no longer centered at the place. This behavior is most annoying and I find provides no benefit. I don't want the view to pan to a different location when I select a net. #PCB#
Custom properties in BOM export not working properly
In a recent BOM export, after selecting various custom properties, some columns were not exported, and other property values were exported into the wrong columns. Basically, entire columns were missing and other columns had properties belonging to a different column. #BugReports#
Need to edit custom properties list in schematic
When adding custom properties to a component in the schematic, this property name gets added to a global table in the schematic. Over time, this table becomes full of cruft and duplicates. A means to edit this table of names and possible values would be useful. In addition, often duplicate names/labels get added. Without a means to delete these duplicates causes problems when creating the BOM. In addition to being able to delete names/labels/tags, there needs to be an option to combine two properties. For example, there are two similar properties - 'Manufacturer PN' and 'Manu. #'. Some components use the first property, and others use the second. They are both the same property, so a means to combine both into a common property is needed to solve this problem. Without this ability, when exporting the BOM, one ends up with two columns, both meaning the same thing. #Schematic#
Moving PCB components with traces results in traces getting offset
In a recent revision (I am using version dated 7/6/21), when moving PCB footprints with traces, the traces lag by the initial offset. This bug has only recently appeared. To reproduce: 1. Add trace to a footprint. Select both trace and footprint. 2. Click and drag on the component. The trace lags the component movement by the amount of the initial movement. While continuing dragging\, their relative positions are maintained. If the initial drag speed is slow\, the offset is less. 3. Use arrow keys to start the move. Then drag with the mouse. The two now move together. The initial movement of the mouse seems to separate the trace and the footprint. Continued movement is no problem. #BugReports#
Exporting to other EDA formats
There is a new augmented reality tool called InspectAR (https://www.inspectar.com). The free version supports both KiCad & Eagle formats. To use this tool, it is necessary to use design files from one of these popular EDA applications. Therefore, it would be very nice if EasyEDA designs could be exported to these formats in addition to just Altium. Of the two, I would prefer KiCad to be higher priority. I am sure there may be other use cases for exporting to these tools as well, especially KiCad since it is open source. #FeatureRequests#
PCB looses part placement on files from older versions
I have noticed this problem for a while now, but was never sure until now. When opening a PCB that was last edited in an earlier version (which one I do not know) and then updating it from the schematic, all the parts placement locations are lost. In other words, they are placed as if the PCB never existed before. Is there a workaround for this bug? #BugReports#
Copper Pour Improvements
Copper pours are sometimes difficult to manage. Here are some suggested improvements: 1. Expand the selection width criteria for clicking on a copper pour outline. Currently\, the active selection width of the copper outline is very difficult to move the cursor over to select it due to it being so narrow. Instead of 1 or 2 pixels\, make the selection width 4 to 8 pixels. If this is not clear\, the selection width is the area where the cursor changes to the select cursor\, and clicking will select the copper area. 2. In the copper area manager window\, when a copper area is selected\, also select it in the PCB editor. In this way\, provide an alternate means to select a copper pour in cases where selecting one in the editor may be difficult. 3. In the copper area manager window\, add a button to rebuild the selected copper area. 4. When a copper area is selected in the PCB editor\, the editing pane provides a select menu for the type of pour - no solid\, solid\, grid. This should be changed to remove the "no solid" option from the menu and make a checkbox called "filled"\, which when checked applies the type of pour fill. The reason for this change is to make it easier to edit the PCB when there are copper pours. Many times\, the fill needs to be turned off in order to make routing & trace editing easier without the distraction of both the pour and the DRC flags when making these changes. Currently\, one must select "no solid" for the fill\, make the edits and then select the fill type again from a menu\, then click "rebuild copper area". If instead\, this change is made\, and then when the "rebuild copper area" button is clicked\, the "fill" checkbox should automatically be clicked and the fill applied. This allows this editing process to required only two clicks - one to turn off fill\, and another to rebuild\, instead of the current process requiring changing a menu twice and another click. #FeatureRequests#
Stop automatic tab reloading
When reloading an EasyEDA page, every schematic & PCB tabs are reloaded as well as copper pours rebuilt. This was not a big problem until a recent release which unloads the entire page after a period of time. Now, when resuming the previous day's work, one must wait a long time for all the tabs to be reloaded and rebuilt. Here is what I would like to see: 1. Make unloading a page after a period of time a user option; the time should be user specified. 2. Do not reload a schematic or PCB tab until it becomes active. A short wait when a tab is needed is better than a long wait every day. You could also make this a user option if desired. 3. It would be nice if copper pours did not need to be rebuilt every time a PCB tab is loaded when nothing has changed in the PCB. #FeatureRequests#
Updating PCB from schematic looses component placements
Sometimes when updating the PCB from changes to the schematic, all the component placements are lost/reset. This doesn't happen in new/current projects, but seems to happen when working on older projects. I am using the latest build - 6.4.14. In older versions (a lot older) it seemed that the PCB updated from the schematic via RefDes. I wonder if it uses IDs now and for some reason, they don't match anymore. While updating via matching internal IDs is very nice (if the schematic refdes has been changed), it seems to me that the refdes should be the identifier used primarily when updating the PCB. So, I don't know if this problem is a bug or not. If it is, please consider fixing it. In the meantime, is there a way that I can fix this problem in my current project. I have opened an older project and have made several changes, but the refdes's have stayed the same. I do not want to have to move every component in the PCB to where they used to go. #PCB#
New Feature - Change net name
I find I need to change net names from time to time. Currently, this must be done in schematic label by label. On the PCB, trace by trace. This is what it would look like: In Schematic & PCB under Design Manager Sidebar, provide either of the following: 1. A pencil/edit icon when clicked on makes the net name editable 2. A right-click menu for a net name that allows the name to be edited When the name is thus changed, it changes it for all occurrences of that net in the schematic or PCB respectively. In addition, an optional, lesser crucial feature would be to automatically update the net name in the related PCB when it is changed in the schematic (or vice-versa). A dialog box may be used to confirm the change. #FeatureRequests#
Provide a Way to Enlarge Desktop App Elements
I have tried to run the desktop version of EasyEDA on an Ubuntu/Linux desktop. All of the screen elements are quite small - icons along left page, toolbar on top, project listing pane on left, all other toolbars and panes. If this was a browser window, I could use Ctrl++ to zoom, but in the standalone app this keystroke doesn't work. The element sizes in the browser app are quite adequate. Can you either - make the screen elements in the desktop app to be the same as the browser app, or two provide some means of enlarging all the screen elements such as can be done in the browser? #FeatureRequests#
Joining two nets in PCB
What 'hack' can I employ in order to connect two different nets in the PCB that preferably won't trigger a DRC error or be overwritten when updating from the schematic? Currently, I use a custom footprint I created that has a trace that connects two pins, and in the PCB, I connect the two nets to each pin of this footprint. This technique has several drawbacks in that it throws several DRC errors, and in some rare cases fails to generate proper gerbers without a gap. Any ideas? Adding this capability as a feature would be great, but what kind of workaround can be used in the meantime? #PCB#
Set Board Outline Dialag messes with size and position
In the PCB editor, set units to mils. Then open Set Board Outline Dialog. Set X & Y position to 0.0 and Width and Height to 500. Close dialog. Now open the dialog again. X & Y position will be -20, and width and height will be 540. The dialog increases the boundary by 20 mils all the way around. When changing to the correct values, the board outline is correct, but opening the dialog on an existing outline will always enlarge it by the 20 mils on each side. The same is true of other units, but the amount added is always 20 mils. This bug appeared sometime in the last 12 months I believe. I don't think it was always there. It has remained through several version updates, and is still in the latest version. #BugReports#
Zoom/Scale Level on Client App
In the electron-based client app, I need to scale the entire application. Currently, everything is way too small. Scaling a page is easy in a browser, but the mechanism needs to be available in the client app. #FeatureRequests#
Tab key brings up attributes dialog box
Recently, when I select a component and use the tab key to edit its attributes in the sidebar, the following dialog started to appear each time: How do I stop this dialog from opening? #Skill#
Circle tool creates two arcs instead of a circle
When using the circle tool in a footprint editor. it creates two arcs instead of a circle. This seems to be a bug, i.e. bad behavior. Please add a true circle primitive that is created when using the circle tool. I am using the current version. #BugReports#
How to Cover pad with solder mask
I want to make a touchpad without any copper exposed. If I create a circular pad, EasyEDA will automatically pull the solder mask away from the pad. I know I can specify keep-away areas to pull the solder mask away manually. My question is - is there a way to add solder mask instead of just removing (pulling it away)? The purpose, of course, is to cover the pad with solder mask. #PCB#
Help with correcting error on BOM
When opening the BOM, I get an alert with this error: array_keys() expects parameter 1 to be array; null given This error is preventing me from ordering components from LCSC. What is the cause of this error? What should I look for to correct it? #Schematic#
Unfilled rectangle in footprint exports filled in Gerber
Create a footprint with an unfilled rectangle. Place in a PCB and generate the Gerber. It will appear filled, not hollow. #BugReports#
Mounted column in BOM incorrect for multiple parts
To reproduce: In a schematic, place two resistors of the same value & type. Select one, and unmount it. Now export the BOM. There will be only one row for the two resistors, and the mounted column will say 'No'. To fix: Separate mounted and unmounted components of the same type, each on its own row. #BugReports#
BOM has extra rows for Digikey sourced parts
If a part lists Digikey as the supplier(instead of LCSC), and extra row is added to the BOM with the Digikey information duplicated on it. No other colums are listed in this row. This row should not be created at all. #BugReports#
BOM not correct for Mounted column in some cases
If two parts using the same component are in a schematic, and only one is mounted. In the BOM export, the Mounted column says 'Yes'. In this case, these parts should be listed on individual rows, each with its own mounted value. #BugReports#
Trouble when exporting BOM
After making some changes to my schematic, when I try to export the BOM, I get this error: array_keys() expects parameter 1 to be array, null given so I cannot export the BOM. Perhaps I made a mistake in entering some part attribute. Please provide some information to fix this bug. #BugReports#
Pick and Place Improvements
While pick & place may not be a high priority, I have found some deficiencies that could improve this area considerably. 1. Many of the built-in packages/footprints do not comply with IPC-7351 either level A or B. This standard states that footprints origin should be in the center and pin one should be on the left. Many of the standard packages are centered on pin 1. Also, the standard specifies which should be pin 1 for polarized devices. The standard packages often get this wrong as well. It would be nice to have these packages fixed to comply with the standard. 2. It is important to make sure all the components in the PCB use standard compliant packages. To this end\, a feature that shows the PCB with the package centroid and direction overlayed on the PCB would be very useful. You could implement this in a similar fashion to the 'photo view'\, except it shows the pick and place overlay as well. I have implemented this feature with python scripts outputting a png file\, but it is extra work and issues with the png output from EasyEDA result in a less than optimal outcome. Please consider adding the feature described in item #2ifnothingelse.#Feature Requests#