asdasdasd
Thermal vias are not plated
Hi all I received my first order from JLCPCB the other day, and on inspecting the boards, it appears that around 90% of the thermal vias are not plated. They are designed to have diameter 0.61mm and drill diameter The photo below shows the problem. (It's a bit fuzzy, but it was the best macro photo I could make with my phone) 1. Is the plating indeed missing from all these vias\, or is some optical illusion at play? 2. Should I have used larger diameter vias for better results? What should be the minimum diameter? #PCB#
lyseoy 2022-04-04 06:07:11 comment 6 0 PCB
Why doesn't "copper area" cover the corners of pads?
See screenshot below. What purpose does it serve to not pour copper around the corners? As a side note, the algorithm doesn't mind to automatically place a via on the corner! #PCB#
lyseoy 2022-03-14 02:19:24 comment 8 0 Circuit Design
Display own contributed schematics and footprints in "User Contributed" library class
As discussed in this post: https://easyeda.com/forum/topic/Why-use-multi-layer-pad-if-the-pad-has-no-hole-38c373982d65409d8f8a100265939479 For the sake of consistency, I would like my own user created schematics and footprints to be displayed in the "User Contributed" class when searching the library. It appears they are displayed there for everybody except the creator. #FeatureRequests#
lyseoy 2019-10-23 10:39:05 comment 2 0 Feature Requests
Alignment functions
After some testing I learned that the behaviour of the alignment functions depend on the initial position of the components to be aligned, not the sequence of which they are selected: For example: Two components that I wish to align right, will align to the right edge of the right-most component; It makes no difference which of the two components I select first. This is different from what I'm used to: You first click the component to be moved. Then shift-click the next component as the target for alignment. Then hit keyboard shortcut for aligning. (And this works, regardless of where the two components are positioned initially) I will argue that this is a bug, because it is not the most efficient way to work: After you've completed your right-alignment for example, you may have to do another vertical alignment to fix what you did when you dragged the component in the first step. #BugReports#
lyseoy 2019-10-23 07:05:04 comment 1 0 Bug Reports
Why use multi-layer pad if the pad has no hole?
I'm verifying a user-contributed decal for a TC2030-MCP-FP Tag-Connect connector. The six connector pads are designed as multi-layer, but they have no holes (hole diameter is set to 0). What will the resulting 2-layer PCB look like in this case? Will I have two matching sets of pads on the top and bottom layer, but with no connection through the board? As discussed in this post: https://easyeda.com/forum/topic/Multi_layer_pads_not_connected-jXtnFyQ8q In that case it would just be a waste of real estate on the other side, wouldn't it? (If on the other hand it IS possible to make a pad that is connected through the board with no hole, I guess this would be preferable as it would be more durable: Repeated connect-disconnects of the connector could wear out the thin copper layer. Perhaps) On a similar note, one of the six pads are not like the others... It's not plated, while the others are. However if there is no hole through the pad, this setting has no effect, correct? #PCB#
lyseoy 2019-10-22 07:43:49 comment 9 0 Circuit Design
How to edit the footprint of a user contributed component?
I'm trying to verify (and if needed correct) the footprint for a TD2030-MCP-FP Tag-Connect cable connector. Yes, this has been asked and answered on the forum before, but when I follow the instructions I only get the schematic view of the "component". I can't see how I can open edit the footprint. How do I do this? #Skill#
lyseoy 2019-10-21 10:29:57 comment 5 0 Circuit Design
Footprint for Tag-Connect TC2030-MCP-FP
My PCB will have a PIC12 MCU that I will use the Tag-Connect TC2030-MCP-FP cable to program. I see there is no official footprint for it in the EasyEDA library, but there are some user contributions. So, it's of course the responsibility of anyone who uses these designs to make sure they are correct. Well, I was hoping I wouldn't have to do that... This is the first PCB I've ever designed, and just figuring out the circuit design, matching components and doing the PCB layout is already a big step in my learning curve. I feel that working with footprints at these really fine tolerances is above my level... So, I would like to hear from anyone who's used these user-contributed footprints: Did it work? Did the footprint match well with the cable? Which one did you use? (Search for TC-2030-MCP in the library to see them) Thanks for any input. #GeneralDiscuss#
lyseoy 2019-10-21 09:46:35 comment 2 0 Others