asdasdasd
I can't use LABEL MAKER extension in EasyEDA PRO
Hey there, I want to use Label Maker extension ( https://github.com/xsrf/easyeda-labelmaker ) in EasyEDA PRO, but I can't do it. I already have it installed on EasyEDA Std, but when I try to install it on Pro version I get an error. I tried to upload it as a .zip as well as files individually. Same result. I also don't see the extensions from Std version in extension manager window. #PCB#
marius 2025-02-07 14:33:47 comment 3 0 Circuit Design
Component spoke pads don't connect correctly to GND cooper region/ plane
Hey guys, so I'm trying to get used to Pro version of EasyEDA, but to be honest, I don't like it very much at the moment. For example, what should I change to achieve the same spoke connections to GND plane for components pads ? Please see the image below, in the standard version the spoke pads are generated but in the PRO version they don't (only one is generated), and If I move the component a little bit lover it won't be generated at all. Also, is there any way to have the cooper plane margins always showing ? #PCB#
marius 2025-01-10 20:11:36 comment 6 0 Circuit Design
Mounting SMD leds on top of castellated pads inside of the PCB
Hey guys, Hey andyfierman, So I have a small artwork project where I want to mount some 1206 SMD LEDs on the top of castellated pads within the PCB [inside of a board cutout]. Because the thickness of the PCB is 1.6mm and the width of the 1206 led is also 1.6mm I thought this should be a nice idea, BUT I'm just a noob, and this is why I ask for your opinion. I want to know if this design is feasible, and if is not, what other options do I have. Also, should I make some specific observations to JLCPCB to make this design ? Thank you in advance for your answer ! #PCB#
marius 2021-01-05 18:50:42 comment 21 0 Circuit Design
net port from schematic doesn't correspond in PCB
Hey guys, new user here! I have a small awkward problem, for some reason some of the net ports from the schematic don't correspond in the PCB. I give you an example. I had a net port named IO12 who linked GPIO12 with the LED1. When I generate the PCB, the LED appears to be linked with another GPIO. Same happens with the R7 - EN wire. I tried to link them directly without net port but it didn't seem to change anything. What I'm missing here ? Thank you in advance! link of the project: https://easyeda.com/mariusmym/esp12f_relay_i2c_sensor #PCB#
marius 2020-04-24 02:58:46 comment 3 0 Circuit Design