asdasdasd
So long, farewell
In 2014, when EasyEDA was featured on EEVBlog 606, I became an early adopter. I was grateful for the ease with which you could create schematics and transform those into PCBs. There were a few quirks, but it was leagues ahead of Eagle. Things improved, features were added. Unfortunately, "checkbox" features were chosen instead of addressing the hordes of niggling issues. Building out a board is so annoying even today, with frankly bad UI choices like floating windows, canvas properties spread around, not always there when you need them (snap on/off, snap distance, grid size, the list goes on). Laying tracks and aligning parts is just painful, and I find myself fighting the software, rather than use it. There are so many workarounds needed that it has become almost as frustrating as Eagle was back in the day. Here's a quote from Dillon on the EEVBlog forum: We are sure we have checked KiCad, it is good enough. But it is hard to use. Well, I've just downloaded KiCad 7. I'm sorry to say that it is MUCH easier to use than EasyEDA. I recreated one of my boards in half a day, and it is BETTER than what I could do with EasyEDA without running out of patience. It might look a bit intimidating at first glance, but the software works FOR you. Creating professional looking schematics and boards is so much more pleasant and efficient. Of course, no one should care about a single user's opinion, and really, no one has forced me to use this FREE piece of software, but I am still hopeful that EasyEDA team members will one day pay attention to UX details. Until then, I wish you the best. #PCB#
martin 2023-02-26 17:32:23 comment 6 0 Circuit Design
Can't update a module once saved?
Hi, I've created a module, saved as module. Doing further saves doesn't report any errors, but the changes aren't actually saved. Is this a known bug, or something specific to my module? #BugReports#
martin 2021-06-16 12:28:25 comment 3 0 Bug Reports
Is there a way to rename nets through the API?
Hello, I've tried api('getSource'), modified the resulting SIGNALS key names, then api('applySource'), but unfortunately, it doesn't appear to be possible to change Net Names. Doing api('getSource') afterwards doesn't reflect changes made. I'd love to be proven wrong! #PCB#
martin 2021-06-14 01:07:35 comment 1 0 Circuit Design
Asking again- snap to center pad: use SCREEN coordinates
Please see attached. It is IMPOSSIBLE to lay a track or add a via near a pad if snap is on. The snap distance MUST use screen coordinates. Please don't tell me I can turn snap off. In the below image, I'm trying to add another via just left of the one at the extreme right of the GND pad. No matter how I zoom in, the via snaps to the center of the pad. #BugReports#
martin 2021-03-28 15:35:18 comment 4 0 Bug Reports
Production mistakes are too easy to make
Hi, I think it might be useful to rebuild the copper areas automatically when generating Gerber files. In a rush, I made a last minute track change, but forgot to rebuild copper areas. So, yes, I made a mistake, and now useless board are on the way. But is there a single time when copper areas shouldn't be rebuilt just ahead of fabrication? EDIT: It looks like this may be a gerber display issue- many viewers show solid areas (no tracks), but some online viewers seem able to interpret the data. I'll know for sure when the boards arrive, I guess. #PCB#
martin 2020-09-30 10:37:12 comment 15 0 Circuit Design
Impedance calculator?
Hi, this page: https://cart.jlcpcb.com/impedanceCalculation is intended to be used as an impedance calculator. I am not sure how it's supposed to work as there is no field for frequency of operation! #PCB#
martin 2020-09-21 15:40:00 comment 5 0 PCB
Import Changes - something broken?
It seems something has changed in board layout and importing schematic changes. I have a board laid out, but had to add a few components to the schematic. When I go to import changes, untouched schematic components appear in both the remove and add lists. This is obviously bad, since the components lose their placement on the board. Maybe I'm doing something that triggers this behaviour. Project: https://easyeda.com/martin/Temp_logger-JFDZywSQc See all components in the Remove list below. None were modified in the schematic: #BugReports#
martin 2020-08-26 11:58:38 comment 22 0 Bug Reports
Isolated return path?
I'm working on an RF board, which requires careful attention to PCB layout. In particular, the power section is critical to avoid introducing noise in the RF section. One special consideration is that input pins on the IC (CC3220) require separate return paths to ground from the rest of the ground plane. The image below shows the ground plane (with pour) and the trace that needs to be isolated, though they share the same net. Is there a way, in this case, to avoid having a continuous plane and apply an arbitrary clearance? #PCB#
martin 2020-07-24 13:12:33 comment 5 0 Circuit Design
Please, please, fix PCB object centering issues!
Hi, a couple of points: 1. For a while now\, laying out a PCB has become more painful than necessary. You have introduced a regression in how parts are moved. For example\, trying to move a part in PCB layout snaps the center of the pad you grab from to mouse position. That should not happen! The mouse click should always be relative to the current position of the object, and never absolute. This is especially annoying when trying to move a part just a little, even more so if there are tracks attached to it. 2. Snapping seems to have gotten messed up. In the below image\, if I grab the bottom part by the GND pad\, I can never get it to align with the top part. I have to somehow remember which pads to grab in order to get properly aligned parts?! If I move it from U1_3\, then it will snap where it's supposed to. At the risk of sounding like a broken record, I think these smalls things eventually amount to what could be considered a "big problem". I know you guys are moving fast, adding tons of features. But please, don't forget the small things! #BugReports#
martin 2019-10-17 18:20:23 comment 11 0 Bug Reports
Bug or change? Routes at random angles.
Hi, I notice that tracks no longer follow 45/90 degrees when snapping a "short" distance from a pad. See image before committing the track (good), and result after (bad). Is there a new setting I'm not aware of? #BugReports#
martin 2019-09-30 00:13:19 comment 3 0 Bug Reports
Stencils from JLCPCB
Hi, I am wondering how much control we might have over stencil? Right now, I imagine the stencil is cut from the top mask layer? Ideally, I'd like to be able to reduce the size of the pads; as it stands, I find the stencils end up dispensing too much paste. If I could have control over that, that'd be great! #PCB#
martin 2019-04-15 23:02:18 comment 4 0 PCB
Edit footprint from anywhere?
Hi, maybe I just haven't found a way to do this. But I think it would be really helpful to launch the footprint editor wherever there is a footprint text box, or from the pcb layout view. The way I do it now is to search for the name of a footprint... I must be missing something! #FeatureRequests#
martin 2019-03-14 11:09:12 comment 7 0 Feature Requests
Copper area not working correctly
This past year has, in my opinion, been difficult for EasyEDA. Many bugs have been introduced time and time again, though they are usually being fixed rapidly, it seems we have to deal with one serious issue or another in each release. Besides the obvious frustration it causes while using it, there is the deeper issue of trust. When I send a board out, will it come back OK? So the latest for me manifests itself in this project: https://easyeda.com/editor#id=|ad350d4a5cb6431890c5d6fe7e9e29fd|644e7fc6cd1046f1afbf28acf332b4b0|5bc840ce518b44409ff219275a030a4b I've invested a bit of time in this (unfinished) layout, and now new copper areas can't properly be added. If I add one on, say, Inner2 and name its net "VDD", no matter what I do, it doesn't properly create clearances from the ground pour, for example. IMHO, you need to slow development to focus first on stability and regain the trust of users. Then, more advanced features become useful, but not before. #BugReports#
martin 2019-02-13 11:21:26 comment 10 0 Bug Reports
Net name from pin name?
Hi, I figure I must be missing something, but couldn't find a reference to it. Net names default to partprefix_pinnumber. I'm wondering if there is an option to change that? In many instances\, defaulting to partprefix_pinname would be easier to follow along? #FeatureRequests#
martin 2018-11-25 11:47:38 comment 0 0 Feature Requests
Erratic wiring in PCB?
Hi, in today's version, I am having some difficulty getting airwires to connect from one pad to the next? ie, I try to connect them, but the wire doesn't snap to the pad, so connections fail. #BugReports#
martin 2018-08-20 17:12:38 comment 8 0 Bug Reports
PCB Antennas
Hello, PCB antennas often share their net with ground. Of course, this leads to DRC errors, which really aren't. Is there a way to "ignore" those? #PCB#
martin 2018-07-26 17:29:44 comment 3 0 Circuit Design
DRC Error - in error?
Hello, I may be doing something wrong here, but I am getting DRC errors I don't understand. In this instance, I am getting a track to track error for minimum distance 0.152mm for a track whose distance to others is much more. See below. Is something off on my end, or is it a bug ? It's almost like there is an invisible "LED_BANK_2" track. Any way to fix it ? #PCB#
martin 2018-07-26 12:25:51 comment 7 0 Circuit Design
Copper Area - Multilayer
Hello, small feature request. I've found that a number of times, I will have the same copper area for 2 or three layers. What I have been doing now is modifying one, deleting the others, then copy pasting, etc etc. Ideally, I could create one copper area, and assign it to more than one layer. #PCB#
martin 2018-07-26 12:12:52 comment 0 0 Circuit Design
Solder Mask concern
Hello! I have a couple of fine-pitch smd ICs over which I have a concern with the output of the solder mask performed by EasyEDA. See images: In EasyEDA: Gerber-viewer solder mask layer: Just looking for some reassurance here. The pitch for this IC isn't out of the ordinary (DFN-MF10), about 0.2mm between pads. Thanks for any pointers. #PCB#
martin 2018-02-07 17:06:10 comment 7 0 Circuit Design
Photo view hides vias if there is a pad?
See photo render: There should be vias on the power pad, per: #BugReports#
martin 2018-01-30 18:03:21 comment 1 0 Bug Reports
z-index / send to back / bring to front. Top layer Region vs. Bottom layer ground pour
Picture 1 shows a copper region on the top layer around the IC: Picture 2 shows a bug where, if I enable display for the bottom layer, the bottom is displayed above the top layer region! Not good, pretty confusing. #BugReports#
martin 2018-01-30 17:59:50 comment 5 0 Bug Reports
Make ground pour outline more subtle
The ground pour feature shows a very fat, dashed outline. In practice, this obscures designs too much, and make it really difficult to use. Ideally, the outline would be a single pixel width, perhaps even with transparency. For selection, I suppose clicking any of the control points would work, or you could consider alternate mechanisms. For example, 3D software lets you [some-hotkey]-click to alternate between selection of objects at different depths. I'll be happy to discuss! Important to me because: UI is important! Though this in itself isn't the end of the world, I feel removing as much friction as possible and being consistent is KEY to a good experience, and allows designing circuits faster and better. #FeatureRequests#
martin 2018-01-30 02:11:32 comment 0 0 Feature Requests
WIsh: more control over ground pour
Hello, in my current project, I need finer control over the ground pour, specifically, I need to be able to block it in "inner parts" of the layout (ie, like an island). The idea is that a boost converter IC's ground layout is specific in how the power ground should be connected to signal ground. My solution right now is to use a copper area and use the clearances to block out the ground, but this isn't ideal. #FeatureRequests#
martin 2018-01-29 17:11:32 comment 5 0 Feature Requests
Spice Model results in 500 error from server
BUG Concise problem statement: I have created a spice model for the LM1117 LDO (subckt from this page: http://www.ti.com/product/LM1117/toolssoftware ) Steps to reproduce bug: Open this schematic: https://easyeda.com/editor#id=917ba1fc12b04601bcdc1074ebb82fc2 Run the simulation Results: Server Error (500) Expected results: Successful simulation run! #BugReports#
martin 2017-03-04 01:44:00 comment 2 0 Bug Reports
Featured on Great Scott youtube channel
Cool. EasyEDA was just featured on the Great Scott youtube channel. Hope it brought a little traffic! #GeneralDiscuss#
martin 2016-05-19 01:15:54 comment 3 0 Others
A small request: footprint default units: mm
Just about every package I see out there defines part sizes and pads in millimeters. Can we default the editor to mm to match? Is this a pref I can set? I'd go for mm when editing footprints, mils when laying down tracks. #FeatureRequests#
martin 2016-05-04 01:11:40 comment 1 0 Feature Requests
SVG Parse error trying to edit footprint
BUG Concise problem statement: Editing certain footprints produces an SVG parse error. Steps to reproduce bug: From the Library Menu, click "More Libraries" Type "TSSOP-20" in the Search field The third result is a TSSOP-20 footprint, click "Edit" Results: Editor is open, no footprint is loaded, popup with error "SVIG Parse error" Expected results: Editor opens with footprint loaded Browser: Chrome latest, OSX latest #BugReports#
martin 2016-05-04 01:07:56 comment 1 0 Bug Reports
Pad center-snap region a little too large
It often happens that you have a via (for example) really near the center of a pad. In some cases, the via naturally falls within the center snap region of the pad, making it nearly impossible to create a trace between the two. Is there a key to suppress center pad snapping momentarily? ie, start at center of pad, suspend center snapping, connect to via, continue on your merry way. #BugReports#
martin 2016-03-14 00:36:17 comment 17 0 Bug Reports
Beware! TO-252 package bad
TO-252 package is under "Through-hole", should be under "Surface Mount". Real problem is pin assignments, which will result in a bad PCB! Pin 3 is not defined, instead the power pad is assigned "4", and chances are the PCB part you are using has 1, 2 and 3. #BugReports#
martin 2016-03-06 03:48:11 comment 5 0 Bug Reports
Pad Layer visibility control for export
Hey guys, I sometimes make my own PCBs at home and I need to be able to easily export the pad layer for solder mask. I don't see an easy way to export it as an image as I would the top layer. Any chance this can be squeezed in quick-like? Tx, Martin #FeatureRequests#
martin 2015-02-07 22:34:23 comment 1 0 Feature Requests