Footprint with pad offset creation
I created a through hole pad for a capacitor with a hole offset of -0.2mm for better soldering on one side (blue pad bottom side) The pad on the internal layer is not centered and will create a DRC error for ring size How would it be possible to centre the inner layer pad and keep the offset on the bottom layer for this pad? #PCB#
PCB teardrop suggestion
Would it be possible to have a separate tickbox choice to enable teardrops for vias and pads? I'm adding an illustration of what it should look like in the settings: #PCB#
PCB grid 0.05mm rounding error
When I try to set a custom grid size in the PCB editor to 0.05mm it detects it as 2mil, when activated it behaves like a 2mil grid and causes rounding errors causing imprecision. Also every time I choose the custom 0.05mm grid I added, it switches to the 2mil default grid option that comes with the program so I "can't" actually choose it (?) Is there a way to increase the precision of the internal units system? Also, the 0.05mm grid works perfectly when I choose it as ALT grid #PCB#
Minimum track corner grid snapping
Currently the corner generated is exactly as it's supposed to be (0.2mm trace, 5x minimum = 1mm corner length), but the trace is now off-grid and has non-round coordinates. Is it possible to make the trace automatically snap to the next grid point when drawing with the minimum track corner set to a specific number (for example '5')? #PCB#
Menu units metric
Is there a way to default to the metric sizes to show the template size for "drawing height" and "drawing width" in the menu? #Schematic#
Schematic component replace "keep current symbol"
I had a mishap with replacing some transistors between designs and accidentally kept the same symbol for a different pinout device and it resulted some faulty PCBs. In this case the source and drain pins were swapped. Could it be possible to make the "Keep current symbol" option always OFF by default and/or adding some kind of a confirmation checkbox if it is actually used? #Schematic#
PCB footprint editor
1. It seems there's no preview for the internal copper layers in the footprint editor. For example I have a connector that has not normal plated holes but slots as "through holes", I'm trying to custom-set the shape of those. It's visible for the top and bottom layers as visual feedback but not for the internal layers. Based on the parameters I inserted (just for testing) there should be a 5x5mm rectangle for pad 1 in the inner layers. Would it be possible to add it to the display to show as visual feedback? It is still visible in the PCB editor after editing. 2. Mathematical expressions seem to be working in the PCB editor, but NOT in the footprint editor. If I type into the X coordinate box 3.5+1 and press enter it stays as 3.5 whereas in the PCB editor it would be correct and display 4.5 3. Snap doesn't seem to be working for the footprint editor, only when I use it as ALT snap (when holding ALT key) #PCB#
DRC clearance
There's a math/comparison of values "issue" where touching track and keepout area result an error. (see first screenshot with tiny X on the track) I have a keepout of r=3.5mm and next to it is a trace that touches it. This results in a clearance error that I haven't seen in other electronics' CADs. The track has nice and round XY parameters so it's not a dragging or rounding error. If I change the keepout radius to 3.499 the error dissapears (see last screenshot). Could it be a simple >= vs > difference in the codebase? #PCB#
Drill to drill clearance
Hi, Is there a design rule for drill-to-drill clearance, because here 2 vias should very definitely show an error. I also added the design rules screenshot. #PCB#
Suggestions for Easyeda
So, I have a strong background with the "professional" CADs, but I did a few projects with Easyeda and oh boy am I surprised what I got for my money (free). Well, first, the integration with LCSC, amazing, library components with attributes, amazing, didn't crash or freeze once, amazing, not cryptic in its user interface, amazing, coordinate boxes accept math expressions, amazing. It's easy to use, I didn't have to read no manual, I think most difficult things were found after a quick Google, amazing. Anyway I can continue praising it for quite a few paragraphs if you let me, but let's talk about the suggestions first, okay? (Actually I might make a separate post about what all the advantages are) But the suggestions now: 1. A shortcut key to the filter pane, Ctrl+Alt+F or whatever the user desires, it'd just be faster to bring up and filter out just traces, labels, vias etc that are currently needed. Also would be great if there'd be possible to add shortcuts for specific object types e.g. 'C' for component filter, 'T' trace filter select etc. 2. When making a copper polygon (PCB) the edge should be highlit or a different color during the editing so it'd be easier to find where I started the polygon. In settings the the polygon edge can be given a different color but that doesn't apply for the editing process itself. 3. Copper pours (the rectangular ones) are defined by starting coordinate and then how long they are, I haven't seen anything else being defined like that, X1 X2 Y1 Y2 would be more logical. 4. Talking about copper pours (fills), if one could create (convert) the PCB outline to become the pour outline and not get the outline itself deleted otherwise you'd have to create multiple copies of it and shuffle them around. 5.Reuse layout function groups the components whose placement etc was replicated, but for example if I update the first group and want to update all the following ones I'd have to ungroup them as there's some kind of a conflict. If the groups are already defined and known to be the same, could they just be updated sequentially more easily? I'm aware of the hierarchical blocks, but those require extra work and a different approach, while not maintaining the "flatness" of the schematic. 6. There's a bunch of preset grid values, both metric and imperial, one can add new ones but can't remove the given system presets. For me personally some don't serve any purpose and the long list just creates clutter on the screen when I want to choose quickly. Ideally I'd keep some frequent ones on speeddial and whenever I need something less standard I just type it in. I reckon that the user should be trusted enough in the pro version there are little safety nets if all of the presets happen to be deleted (or just keep just one as default) 7. For outputting BOM there's on option to pick out TH components (and/or SMD ones), or atleast be able to sort based on those as Mounting Type etc filter exist but don't seem to function as expected. Same goes for Pick and Place file. It really is necessary sometimes for more professional project file sets, but as I understood it's designed to integrate into JLCPCB ordering system as it is right now. Right now I have to pick the lines out one by one based on me old memory of what component was used in the project. 8. Not really a suggestion, but I'm not sure (yet) if for example component label text (U7, NE555 etc) are aligned by the actually most sidemost line (first line of A or the arc part of C) or is the mechanism more close to monospace font alignment. Visually it'd be better if they lined up perfectly. 9. There's no way to filter for labels in the schematic, can't just choose all labels (or all labels of designator field) and change their size, color, position, alignment etc, I'd consider this a concern 10. More labels hahaha. Sometimes for documentation purposes it's necessary to have the designator field visible both on the silkscreen layer and the assembly layer, I haven't yet found a way to add both of them to the footprint and to keep them interactive too (designator value updates etc). 11. Every time when opening a project (Open All) I get the warning that there's a lot to open and that might take a while. Okay, reasonable, but after a while it's annoying, could there be a "don't show this again" checkbox to streamline it a bit? Bugs I found: 1. When printing the ohm symbol freaks out and switches to another font making it look extra long and spaced out. 2. I have designated the not connect crossflag as red as I find in more informative that way, but with printing it turns back green like in the original configuration. Sincerely, Thanks for the great software! #Others#