asdasdasd
missing paste in layout view but not in gerber files
I am using the smt usb connector part C393940. It has a footprint with the correct paste layer. But in the layout view it is showing up with missing paste ... It shows correctly in the gerber file so this is not holding me up. I just thought someone might want to fix this bug. My project is public at https://easyeda.com/editor#id=64bf1227668b4207bcd1d4701e7a8f55 #PCB#
mchahn 2022-03-19 13:43:18 comment 1 0 Circuit Design
esp-12f pinout
I don't know if this is the right place to ask this but I'll give it a try. I added the ESP-12F(ESP8266MOD) (LCSC #C82891) to my design. It is a jlpcb smt part I'm using on my jlpcb board. The pins didn't look right and I looked at the datasheet linked from the LCSC page. The pin labels on the bottom and one side are totally wrong. I triple-checked with pinouts from multiple pages on the web. Should I trust what the datasheet says and replace the labels in my schematic? This makes me nervous. The pin labels could be wrong or the part number could be wrong which would be a giant problem. I know we are warned to not trust 3rd-party submissions, but this is from lcsc and jlpcb. What should I do? #GeneralDiscuss#
mchahn 2022-03-13 10:57:45 comment 4 0 Technical Discussion
Mystery ratline?
I have a ratline that I can't explain. I have been staring at this problem for hours. The project id is f867d2a56d3249cea6c3c3622bb57a83. Can someone please have a look and tell me what I'm doing wrong? Thanks in advance... #PCB#
mchahn 2021-10-25 08:52:32 comment 3 0 Circuit Design
"view datasheet" doesn't work if LCSC has no stock
I am designing a pcb that includes the voltage regulator C80894. It is available in the library and I verified with JLPCB that there are 2453 in stock and I can use the part. LCSC has none in stock and when I click on "view datasheet" I get a message saying ""C80894" did not return any results". So I am not able to view the datasheet for this part. This is a problem., #Schematic#
mchahn 2021-08-14 00:11:35 comment 7 0 Circuit Design
I used a part from the EELIB and a part from LCSC was put in my pcb order
I use symbols from the EELIB all the time. I picked an LED symbol and put it in my design. After placiing my order with JLPCB I was surprised to find a charge for manual assembly. The cad program had inserted an LCSC part into my design without telling me. I was going to assemble the led myself with a special mount. I have used the EELIB on many designs and it has always just given me a symbol. And if it is going to order a part from LCSC it should tell me. #Schematic#
mchahn 2021-07-26 14:45:41 comment 2 0 Circuit Design
"view datasheet" broken
When I have a schematic open, select a part, and click on "view datasheet" I am taken to the front page of LCSC website (https://lcsc.com/) and not to the specific part page. This is a recent problem. Is there a fix for this I can use? #Schematic#
mchahn 2021-07-23 06:45:10 comment 3 0 Circuit Design
Can I export a BOM with prices?
When I click on the BOM button I get a pop-up window that includes part prices. But when I export that BOM no prices are included. Is there a way to export a BOM with prices? #GeneralDiscuss#
mchahn 2020-07-17 13:33:16 comment 3 0 Others
newbie needs help getting zener value
I tried every single zener model in the spice library for search word "zener". There were copies of the lib 10V zener and a few other that worked (most were missing subckts etc.). I was surprised that virtually none of the models listed told the voltage in the name or description. Hence having to try them all. I need a ~6V zener so I figured I had to add in a model. I found a good-looking list of models that included my preferred zener. I pasted that model in as spice text, changed my component model name to match, but it doesn't work. My project is https://easyeda.com/mchahn/erdri-sim. Can someone help? This is all new to me. EDIT: dammit, I forgot and changed the project. I'll will post here when I get it back to what I wanted to show. EDIT2: Ok, it is back to my example. Please help. #Simulation#
mchahn 2020-06-18 10:31:42 comment 5 0 Circuit Design
all lines drawn are minimum width
Every trace I draw is minimum width, no matter what I set the default "routing width" to. After I lay down each trace I have to select it and change the width manually. This happens on all projects. I made my current project public at mchahn/erdri-main-esp. This is kind of urgent. #PCB#
mchahn 2020-06-10 04:30:09 comment 24 0 Circuit Design
library search doesn't work well
When I type in FUSE-TH_L22.6-W9.0 I get over a thousand results\, mostly parts that do not have FUSE-TH_L22.6-W9.0 in the name. It is impossible for me to find the part even though I have the exact package name. This makes it pretty much useless. I also put in the example from help which was "1kohm 0603". The example result only shows 1k resistors of size 0603 but the results I got included a zillion 0603 parts that aren't even resistors. In general if I put in two words it shows all results the have either of the words. This is not very useful. I obviously only want parts that have both words. I am trying to edit a package already in my schematic. I assume the only way I can edit the package is to bring it up in the library and then double-click on the package picture. Is this correct? If so then I have no way to edit the package since I can't find the part. #Schematic#
mchahn 2020-06-02 05:26:37 comment 2 0 Circuit Design
how do I vertically center a net label with a horizontal wire?
How do I create a net label that aligns correctly with the end of a horizontal wire? New labels always have the connection point at the top or bottom of the text (see mclr below). I also can't change the connection point from centered to bottom. Right now I have old labels centered like msl that i copy and paste which is a lot of trouble. In this image the top lable has the connection point on the bottom right and the second label has the connection in the middle. How do I change mclr to align with the wire? #Schematic#
mchahn 2020-05-16 02:31:39 comment 5 0 Circuit Design
Add option to disable DRC checking to copper area
The new DRC checking to copper areas is a big problem for me. I can't move a via or bottom trace without an X showing when there is really no error. This means I can't see real errors. I have posted a thread about this problem in the PCB Layout section of the forum. Feature suggestion: In the DRC settings dialog below the checkbox for "Check object to Board OutLine" there would be a new option checkbox "Check object to Copper Area". #FeatureRequests#
mchahn 2018-09-18 05:17:39 comment 1 0 Feature Requests
easyeda is outputting unreadable gerber files
Please see my topic in the JLCPCB section of this forum called "gerber doesn't appear at checkout". #BugReports#
mchahn 2018-09-11 07:32:18 comment 4 0 Bug Reports
gerber doesn't appear at checkout
I used easyeda to create a pcb. I told it to send the design to JLCPCB. Once I was at JLCPCB it put up the progress bar and it seemed to work in about a minute. I added it to my cart. In my cart the little board image was blank and said "no image". When I click on the gerber viewer link nothing happens. I tried all of this twice. I want to order this asap but I want to view the gerber first? Can you help me quickly? #PCB#
mchahn 2018-09-11 04:42:36 comment 3 0 PCB
layer dialog flashes and can't be clicked on
Most of the time when I open the layer dialog it flashes open and closed rapidly. While it is flashing I cannot use it as clicks don't work. I found that if I move it around the screen and try over and over I will get it to work. But then later it will start again. Latest easyeda web page on latest chrome. It might only happen at certain window sizes. I will experiment more. EDIT: I would really like to be able to disable the feature of it automatically getting taller and shorter when I hover. That is really annoying. #BugReports#
mchahn 2018-09-11 03:25:48 comment 4 0 Bug Reports
ground plane interfering with editing pcb
I have a new problem that has appeared since I last used easyeda a month ago. I have a copper area covering the board in the bottom layer to make a ground plane. When I route a trace in the bottom layer it constantly shows a DRC error X. I think this is because it is treating the copper are the same as traces. Also when I do a right-to-left select and delete, the copper area is also deleted. This also makes me think it is treating the copper area as a trace. This is more than annoying. Having a constant DRC error showing means I don't see real DRC errors. I decided to just remove the ground plane to fix this but then all the grounds show ratlines which makes them pretty much useless. So for now I am deleting and recreating the area over and over. Is it possible there is a setting to fix this or is it a bug? EDIT: I'm using the latest easyeda and latest chrome on ubuntu 16.04 linux. #PCB#
mchahn 2018-09-10 09:58:13 comment 10 0 Circuit Design
annoying drop-down menus
When my cursor passes over one of the drop-down menus\, which happens often\, I have to click somewhere to remove it. I find it impossible to work without this constantly happening. It is a web standard that this should only happen when I *hover* which means the menu waits for a second before opening. I know this is only an annoyance, but it has gotten very irritating. #GeneralDiscuss#
mchahn 2018-05-30 08:13:20 comment 9 0 Others
serious bugs in editor
I haven't used the editor in a while. I have found a number of bugs in the current version. 1) I can't connect a GND SMT pad to the ground plane. No wire appears. Thru-hole works fine. My project is on hold until I find some way to get around this. 2) Changes in the right bar are very hard to make. The drop-down select items are the worst. I can only get the change to take effect when I go to another field, make a change, and press enter. 3) Double-click often opens an unwanted dialog box. When I double-click on a wire to make a node the box appears. Then I close the box with escape to see the new node. I have also seen a dialog box appear when double-clicking on a word inside a text box. 4) Sometimes when I open the editor in my browser and old version appears. When I close the project and re-open it I see the latest version. This scares me when it happens. :-) These are the ones I remember right now. Is there some way to use an older version? #BugReports#
mchahn 2018-03-26 11:54:55 comment 27 0 Bug Reports
no fabrication output
I'm ready to release my PCB but there is no fabrication output menu item or button. I have shared my design with dillon@easyeda.com. #BugReports#
mchahn 2018-01-01 08:07:54 comment 3 0 Bug Reports
invisible net
Two nets disappeared on my PCB layout. I have been able to replace one but the other net won't appear no matter what I do. I've shared this project with support@easyeda.com. Can someone look at it and see what is wrong? The project is P3-head. Nets OUT2AP and OUT2BP are the ones that disappeared. I was able to replace OUT2BP but I cannot connect a net to pin OUT2AP on the connector JPMOT. I think the nets are actually created but they are invisible. I have seen net names appear where they should be with no net. I have tried everything I can think of. I've closed everything and reopened them with no luck. Thanks in advance ... #PCB#
mchahn 2017-09-21 12:18:04 comment 3 0 Circuit Design
suggestions
I am amazed at how good the easyeda software is. It is hard to believe how many good features are packed into a web page. I'd like to hire (steal) whoever develops the software. The new changes to the UI are especially good. I've used easyeda for about a year. I've also developed four or five web apps myself over the years. I'd like like to offer some humble suggestions ... Web standards ... 1) All dialog boxes need to support the ESC and Enter keys. Right now you have to move your hand to the mouse just to accept a dialog. 2) Clicking on links should not in general open new tabs in a browser. It makes sense when using the editor but at all other times it is unneeded. I find my tab bar full of unwanted easyeda tabs. 3) Changing the page magnification in the browser should be supported. EasyEda disables it now. I'd like to make everything around the editor smaller. I realize this may be a lot of work to change. 4) It would be nice if you could rearrange the tabs. Editor ... 1) Hitting ESC should cancel all modes. Some modes have to be used to get out of them. Placing a part is an example. 2) Menus like PCB Tools should be able to be hidden. I never use Preview but it is always there taking up space. Annoyances ... 1) The layers dialog becomes taller and shorter when moving the mouse over it. This is not needed and doesn't match any other dialogs. I find myself chasing a button as it moves around. 2) "Ask a question", "Chat live", etc. cover up things in the page and can't be removed. 3) I hit save (ctrl-S) all the time. Many times it says "Nothing changed" and I have to get the mouse to close the dialog. This is not necessary. If it is already saved then great, no need to tell me. #GeneralDiscuss#
mchahn 2017-07-18 13:58:23 comment 11 0 Others
soldermask on stencil?
I have a copper region with no soldermask. It is a thermal pad, not a component pad. When I view the gerber file (GTS/GTL) I can see the cutout in the soldermask is correct. Will this area affect the stencil? The stencil won't work if these areas are cut out. I tried to view the stencil gerber file but I couldn't find it. I can see only DRL, GRS, GTL, DTO, and DKO. #PCB#
mchahn 2017-07-16 06:09:19 comment 5 0 Circuit Design
Unable to send updates from schematic to PCB
I cannot update my PCB from my schematic. It worked until today. When I tell it to update it shows the list of changes, but the changes don't happen. The nets are unchanged and then when I try to update again it shows the same changes. I have given Dillon access to the project. It is my project XY-reve. Account Mchahn. #PCB#
mchahn 2017-07-16 06:01:34 comment 14 0 Circuit Design
My Parts list is gone
When I select "My Parts" in the drop-down it goes straight to the parts search list. I can type in the name and search but I usually can't remember the name. I liked the old list that showed the recent ones at the top. It was very easy to find one of my old parts. It only took one click. #Schematic#
mchahn 2016-10-23 10:46:31 comment 2 0 Circuit Design
I can't find a cloned part
When I clone a part it lets me give it a new name and then I can't find the new part anywhere. It doesn't show up in a search. #Schematic#
mchahn 2016-10-23 10:43:00 comment 5 0 Circuit Design
how do I get centroid data for my pcb design?
I need centroid data for a pick and place machine. How do I get that data for my PCB? #PCB#
mchahn 2016-08-22 14:02:35 comment 3 0 Circuit Design
What is the smallest PCB that can be made?
I need a pcb that is 1" by 1.25". Is there any problem making a pcb that small? #PCB#
mchahn 2016-08-16 08:08:34 comment 3 0 Circuit Design
I don't want to chat
Can I get rid of the Let's Chat widget? It is annoying and sometimes covers things I want to see. I have been going into the page source and deleting it but that is a bit of work. Maybe I should write a monkey script to auto-delete it. #GeneralDiscuss#
mchahn 2016-05-25 03:08:07 comment 1 0 Others
feature request - lock file
Sometimes when I open an old board design it asks to save it when I'm done. Also I have opened an old one thinking it is the current one. It would be nice if I could lock an entire project so it matches the release. #GeneralDiscuss#
mchahn 2016-05-20 08:23:06 comment 3 0 Others
Feature Request: Move part names to document layer
I want to document the part prefixes like R11 and C11 on the document layer. But the part outline itself needs to stay on the silkscreen layer. I would like the option to just change this on a selected part, not always put it there. This way I can print out the document layer for the assembler to know which part prefix goes where, but the outline would be on the board so they can place it. I don't want the customer to see all those part names. #PCB#
mchahn 2016-05-19 04:27:38 comment 2 0 Circuit Design