asdasdasd
3D 'thing' showing: how to get back to normal? (Pro version)
Hi, While creating a PCB I tried to change the size of a rectangle on the Top Silkscreen Layer and somehow the rectangle - and everything inside it - changed to some 3D 'thing' (block DCC02}. If I click on the block it changes to: I have no idea how to get it back to 'normal', like block POW03. Searched the Pro documentation and the Forum, but no solution is to be found. Please help! #PCB#
mijnmodelbaan 2022-09-26 17:08:53 comment 1 0 Circuit Design
Group function in schematics
I would like to have the Group function in the schematics like in the PCBs, because it is sometimes much easier to make a group in the schematics. #FeatureRequests#
mijnmodelbaan 2022-09-11 16:54:48 comment 2 0 Feature Requests
3D Model removal in Pro like in Std
Hi, I would like to be able to remove the 3D Model from from a PCB from a single component, like in the Standard version This is a very handy feature so one doesn't have to create 2 devices (1 with and 1 without 3D Model). Thanks! #FeatureRequests#
mijnmodelbaan 2022-09-07 16:47:11 comment 2 0 Feature Requests
How to remove 3D Model from some parts of the same model
Hi, I want to remove some of the 3D Models. I have a PCB with ten of the same components (devices), so all have the same 3D Model. To get a better 3D Preview, I would like to remove the 3D Model from some components. If I change this in the library (edit device, remove 3D Model), all the 3D models of the same components are removed. Is there an easy way to do this without removing all 3D Models ? Thanks for your time. #Skill#
mijnmodelbaan 2022-09-03 23:29:54 comment 0 0 Circuit Design
How to change standard Routing Mode for PCB
Hi, I would like to change the standard setting for the Routing Mode in the Common Settings from Block to Around. How can I change this? Thanks in advance. #PCB#
mijnmodelbaan 2022-09-03 20:59:41 comment 0 0 Circuit Design
[Fixed] Footprint of device 'out of sync'
Hi, I have a project ( this one ) where the 'component' parts of the footprints are shifted (out of sync) with the 'top layer' parts. The complete component should be centred on the thicker line and the big square of the 'Pin Soldering Layer' should be centred around the 4 via's. I would like to know if this will be a problem when ordering a PCB or if I can ignore it. I don't know how and when this happened, but I would like to know how to solve it in a simple manner. Thanks for your response. #PCB#
mijnmodelbaan 2022-08-29 22:18:03 comment 2 0 Circuit Design
[Fixed] Dashed lines
Hi, How do I get rid of this dashed lines around devices in my schematics? They seem to appear after I change something in the symbol, but I've no idea how to get rid of them. BR//Willem. #Schematic#
mijnmodelbaan 2022-08-28 03:56:59 comment 2 0 Circuit Design
[solved] [After import] column empty when updating (Pro version) - Nets not updating
Hi, I finally managed to import a project from Std to Pro version of EasyEDA ( https://oshwlab.com/mijnmodelbaan/mega_motor_n or https://pro.easyeda.com/editor#id=b14a59c4633d40fe93ae8cca917d5cfd ). I checked the footprints, updated the PCB, corrected the errors and saved everything. Closed editor and went to bed. Opened the project again this morning and checked the PCB for changes in the schematics (standard routine for me). To my surprise there were errors! So somehow the changes weren't saved or I made a mistake myself. So went to the schematic, clicked [Design] > [Update/Convert schematic to PCB] and found there were some 20 'Update Net' actions on the list, about half of the number from yesterdays list. I did then have a better look at the list and found all the 'After import' fields are empty: What am I doing wrong - what's (not) happening here - what did I forget ? There are 2 boards in the project. Each board has 5 components which go onto the PCB. Both boards show the same behaviour during updating. Thanks in advance, BR//Willem. [solution] The new concept of 'devices' solved this. I was using the imported symbols and footprints and this caused the error. After replacing the L1 component with a newly created device all worked fine. #Skill#
mijnmodelbaan 2022-07-24 20:02:05 comment 1 0 Circuit Design
lock / unlock
Hi, I would like to have the locking / unlocking of schematic components in the Pro version. #FeatureRequests#
mijnmodelbaan 2022-07-22 19:39:16 comment 1 0 Feature Requests
[solved] Edit footprints
Hi, Simple question: how can I edit footprints in Pro version? There's a whole chapter about creating new footprints in the manual, but nothing about editing existing footprints. The part I'm looking for is this: I'm using the desktop version, btw. [solution] Due to the new concept of 'devices' you don't need this anymore. Just create a new device with the correct symbol and footprint and make sure all the numbers (pins and pads) correspond with each other. #Skill#
mijnmodelbaan 2022-07-21 19:49:44 comment 1 0 Circuit Design
translation
Hi, Started today using Pro version just to see if and how it works compared to Std version. Well, I'm not convinced this is a better version of the 'old' Std version. During installation I had to make some choice in a pop-up window, but the text was all in Chinese, so I just choose one option (don't know if it's correct for my use, or not). Then I started to use the local editor but I couldn't migrate from the online Std version to the offline Pro version straight away, had to do it via a zip file. Tried the migration via both online versions, that worked after some trial-and-error with passwords etc. Now I'm looking for some help in the tutorials, but all the text on the images is in Chinese - very frustrating. I think I'll wait a year or so before using it again; maybe everything is in plain English then and not translated by Google but by humans. #BugReports#
mijnmodelbaan 2022-07-20 21:10:46 comment 1 0 Bug Reports
Struggling with modules
Hi guys, I'm designing a pcb which should have 4 (later 8) exactly the same units on it, together with some other stuff. To accomplish this I was thinking about using modules and this is what I did: First I created a whole new project for it (https://easyeda.com/mijnmodelbaan/lightning_02_copy) Then I created a schematic and a pcb from that schematic. Routed a few tracks by hand, used the local autorouter for the majority of the tracks and after routing the last tracks by hand, I was finished. Well, that is to say, after routing the last few tracks by hand and correcting the DRC errors it was finished. Then I saved the schematic as a schematic module and the pcb as a pcb module and started a new project (https://easyeda.com/mijnmodelbaan/module_testing). In this project I created 2 sheets and on both sheets I put the schematic modules I created earlier. For the first one I used the letters 'QQ', for the second one I used 'AA'. After doing this I noticed the components were all renamed with the chosen letters (QQ, AA) in front of the original names. But of the Nets only a few were renamed, 16 of the 49, and the ones not renamed pointed to both sheets. This is not what I expected. I created an empty pcb (just to see what would happen) and put 2 pcb modules on it (the ones I created earlier). Here the same problem arised: after importing the changes only 16 of the 49 Nets were ok. Please let me know what I did wrong so I can solve this, preferably in a simple way. Thanks for your time. #Schematic#
mijnmodelbaan 2020-11-10 05:08:51 comment 6 0 Circuit Design
FIXED: DRC - Track Width errors
Hi, Is there a way to use 2 track widths on the same NET w/o getting Track Width errors? In the picture there is a 25mil track (in blue) to a pad and in red there is a 10mil track to an LED. As they're on the same NET I get the errors (warnings). I can't make both tracks the same width, but don't want the errors either. BR//Willem. #PCB#
mijnmodelbaan 2020-09-16 02:00:14 comment 2 0 Circuit Design
Auto backup not working anymore - resolved - user error
Hi guys, The auto-backup function seems to be broken. I've put it on a 10 minute interval (first picture), which has worked (more or less) until 2 days ago, but yesterday it didn't work anymore (second picture). So after the problem I reported yesterday ( Everything moves... ) I just wanted to go back to the previous backup and discovered that that function seems to be broken; I only have a backup from before all the changes I made and one from after the disaster, with all the components moved off the grid. BR//Willem. #BugReports#
mijnmodelbaan 2020-04-30 15:45:53 comment 3 0 Bug Reports
Everything moves...
Hi guys, This morning I spent some hours of putting all the components of my PCB in the right spot. Then I saved the PCB, closed it, closed the editor and went for lunch. Now I opened the PCB again and everything has moved 50 mil to the left and 50 mil down, so almost everything is now off-grid. Some components were locked, some were not, makes no difference; they all moved. I'm using version 6.3.39 BR//Willem. #BugReports#
mijnmodelbaan 2020-04-29 21:08:28 comment 2 0 Bug Reports
Exclude nets from autorouting
Feature Request Brief title for your desired feature:Exclude nets from autorouting. How would you like the feature to work? Remove the ticks before the netnames in the Design Manager so the router knows which nets not to route Why is this feature important to you? Now I have to create a whole list with exclusions in the router window; the method I suggest is, imho, easier for the users. #FeatureRequests#
mijnmodelbaan 2017-12-07 23:59:28 comment 4 0 Feature Requests
Wiring : read_net_id: String expected
Hi, Using the local router server as the cloud server is quite busy the whole day. The router starts and then I get a whole list of errors (?): 'Wiring : read_net_id: String expected'. After this a whole list of 'Routing' and the progress bar stays on 99%. Tried this several times with different settings (w/ or w/o skipping nets, adding special nets, etc.) but the outcome is the same: some ratlines are replaced with track, some are not. How to solve this and is it possible to change the local router server so it displays which net_id has a problem ? BR//Willem. #PCB#
mijnmodelbaan 2017-12-04 03:43:04 comment 13 0 Circuit Design
Unresponsive chrome browser
Hi, Since the latest update I can hardly work with EasyEDA anymore. I got an EasyEDA update and an update of my Chrome browser around the same time last week and now I can hardly work in EasyEDA anymore. I have to wait 5 to 10 seconds before I can move something or wire something or even write something. This is very annoying and very contra productive. Are there more reports about this issue, more people experiencing the same phenomenon ? Has something happened to your servers or connection causing this ? I can write this post w/o any problem or delay, it's just when I work on a schematics or PCB, then it's happening - delay after delay. Very frustrating. BR//Willem. #GeneralDiscuss#
mijnmodelbaan 2017-08-03 04:59:55 comment 6 0 Others
DRC hole2hole
Hi, Is there a way to tell the DRC to discard certain errors for certain components ? Example: I've created a component with several pads, deliberately placed very close together. Of course I get the hole2hole error as they're too close to one another. Is it possible to tell the DRC to forget about this error for this component ? BR//Willem. #PCB#
mijnmodelbaan 2017-07-27 23:11:51 comment 3 0 Circuit Design
Footprint Manager problem
Hi, I tried to convert my schematics to a PCB but am getting the 'package not assigned' message (constantly). When I check in the Footprint Manager I don't see my Schematic Lib components anymore, only footprints. If I go to 'parts' section I do see the Schematic Libs components and the Footprints of the PCB libs, no problem there. It worked a few days ago w/o a problem so I think there is some problem with the software. Please check. Thanks! Willem. #PCB#
mijnmodelbaan 2017-07-21 05:02:02 comment 7 0 Circuit Design
PCBlib component with some extra's
Hi, I changed an existing DIL component. I added some extra wires and pads so I don't have to do this several times on the PCBs I'm creating (and I won't forget it this way...). But somehow it doesn't work: the router doesn't want to connect them and if I try it manually and select one of the wires the whole component gets selected. Is what I want überhaupt possible and if yes: how to do this correct ? Willem. #PCB#
mijnmodelbaan 2017-07-18 05:09:57 comment 3 0 Circuit Design