looking for smd jst connector.
I'm looking for a side entry smd connector. I prefer a pitch of 2mm or under (1.25 ideal) I need it to be 3P (position). I've looked through the EasyEDA parts list and can't find what I'm looking for. Is there a way to make the search use an "AND" function on the words entered? For example, if I enter "smd jst 3p" it list any item with any of the terms not all of them. The reason I prefer jst is because I can get ready made cables for these. I can use any connectors as long as I can get pre made cables. Thanks. #Library#
Times are shown wrong.
This could be a problem with my computer but it only seems to show up here. I've just posted a thread and according to the boartd I posted it 10 hors ago, thus, I live in Australia and we are 10 hours ahead of GMT. I'm running Linux Mint. #Others#
Can't login to easyEDA.
For the last two days I have been unable to login to easyEDA and when I try I see, I've no idea what the above means. However, comming here required me to login with what appears to be an identical page and I was able to login. Having now logged in (here) I can access easyEDA. Can anyone explain this or tell me how to fix it? #Others#
I'll just keep reporting bugs until someone starts fixing them.
Completed a PCB today. Had to run the Tools->Copper Manager to complete it. It states, However, the "Right Hand Panel" shows, Yup, no option to select "Visible" #BugReports#
What are the letters in the menu?
When I click on menus I get a sub menu popup. I.E. In this menu are various letters enclosed in parentheses. What are they I.E. (O) on Zoom Out, Pressing "O" doesn't do anything. Pressing "F" for Fit All in Window doesn't do anything either but the totally illogical "K" Fits Everything in the Window. Is there some logic to this that I'm not seeing? #Schematic#
Can we take a project from Pro and convert it to use the older version (non-Pro).
I just can't trust Pro anymore. #Schematic#
How to delete a project?
I've attempted (a few times) to delete a project and when I right click the project and click Project Management->Delete and I'm shown this, Before I have a chance to do anything, it changes to, And the project is still there. Is there something I'm missing? Thanks #BugReports#
Can we get the filters in Place(P) fixed?
If I'm drawing a schematic the filters in Place don't do anything. This is such a glaring bug that I feel it must be something to do with the English Version and the developers haven't seen it. For example, say I'm looking for a Pic processor, I choose Pic18F in the search box and I get, Note, 1600 items. I now select QFN-28 as the footprint I want and click Apply Filters. This is what I get, Note, number of results hasn't changed and the first item is a PLCC-44. If these filters worked it would be much simpler for me to find what I want. Thanks. #BugReports#
Rotation bug in 3D model.
I have a board which is routed, As can be seen the processor (Pic18F26K40 - ssop) is horizontal. When I generate a 3D version I get, Which, as you can see, has the processor vertical but the pads are correct. Note the position (in both images) of C1 and C2. I also get this happening a lot - especially when trying to generate a 3D model, Thanks, #BugReports#
imported projects don't have footprints.
I've imported a project into the pro version and all the components have no footprint, And, what is all the stuff at the bottom? I don't even know what item 5 is. If I click refresh it stays the same. What is it? And, why a huge discrepancy between LCSC and JLCPCB prices? BTW, It doesn't matter which component I choose, none have footprints. Undeterred, I started a new project and tried to call it power but it seems that path already exists even though it didn't. So, power1 it is. I started with a DC connector. Clicked place, found connectors, eventually found AC/DC power connectors (what is that order - appears to be random). There's 693 to choose from. I try to select both receptacles, if I'm quick I can select both but if I take my time, only one!!!! Note, in the above the other options are greyed out. If I'm quick though, And now I have two filters selected. Later, I wanted to place a diode, selected it, wanted it vertical so pressed "R" to rotate - no longer a keyboard short cut (why), no problem I'll use the toolbar at the top. Greyed out, Everything I try to do I'm fighting this thing all the way. #BugReports#
How to find things in pro?
I have a project in Pro where the PCB outline is wrong. I wanted to set it to an absolute value rather that guess with the mouse. I looked for how to change the board size - couldn't find it. Googled "easyeda pro set board outline" to be presented with, No problem, seems straight forward enough. Back to EasyEDA Pro and try the solution, No "board outline" option. I'm assuming that the google search resulted in the option for the none Pro version. This seems to happen everytime I try to google anything in Pro which makes Google absolutely useless. Is there any way to fix this? Another unrelated problem, When in the PCB bit, select the board units to be mm. Select the grid size to be 2. Tab to set the the snap to 1. On mine it changes it to 0.1mm from whatever it was. Tab again and it'll change the grid size from 2 to 20. Sometimes it changes on the first tab. #BugReports#
Continually being told wrong username or password.
I've mentioned this in another thread but it's really frustrating and nothing seems to being done about it. For the last week or two I keep getting told by EasyEDA and JLCPCB that my credentials are wrong when they are definitely not wrong. Something broke and it's driving me mad. There is, of course, an easy fix, click change password, enter previous password and all good again. HOW MANY TIMES DO I NEED TO CHANGE MY PASSWORD TO THE EXACT SAME PASSWORD BEFORE SOMEONE WILL SORT THIS OUT OR TELL ME WHAT I'M DOING WRONG. Mike. #BugReports#
What does theis warning mean? Pro version.
I've just imported an old project into pro and got various warnings such as, [Warn] : Found that the symbols have the same name GND but different shape, one of them have been renamed as GND(1). Related devices are : e80 Does this mean my GND is split along with Vcc, SDA and SCL. Mike. BTW, no idea where this thread belongs. #GeneralDiscuss#
Where are the R0402 resistors?
If I go to Library and select chip resistors, ALL the listed are 1206 or bigger. If I then type R0402 in the search box it finds over 1000. Why aren't they showing in the first example. And, a little bugette. If you now click on chip resistors (same one as earlier) in the left panel, it ignores it so I guess it thinks they're still displayed. Mike. #BugReports#
Component orientation wrong - what will happen?
I've ordered some PCBs and have noticed a problem in the final image. I have a bridge rectifier (MB26S_C840748) on the board, In EasyEDA it's shown as follows, Note that pin 1 and 2 are AC in. On the parts placement it shown as, Which is rotated 90° CCW. However, in the datasheet it has this diagram, Which appears to show pins 3 & 4 as AC in. Which of these is correct and what will I get on my circuit boards? Mike. #BugReports#
Changing design rule.
I am routing a board that had the power rails set to a width of 0.6mm. As I've added a QFN chip I had to reduce these to 0.4mm. I did it here, Note, the "Apply Design Rule while routing" is checked. However, when I try to route a power trace it maintains the 0.6mm width. How do I change this? Mike. #PCB#
Adding a sheet to a project - how?
I have a project and I'm trying to add another sheet to the schematic. I right click on the project and select new schematic. I get an empty sheet called sheet 1. I then click on SaveAs to save it to my project. In the dialogue box that comes up my project isn't listed. This is what I see, The dialogue box did contain all my other projects so I quit easyEda and archived the other projects thinking that maybe it was out of sync with the folder. Is there a limit (of 5) to the number of sheets in a schematic? I'm using the local version. Mike. #BugReports#
How do I backup a project to download it?
I want to get a project "local" and used the backup command to do this. This is what I see, It gives me no choice in the active window even though (as can be seen in the background) I have 31 projects!!! How do I download a project to make it local? Mike. #BugReports#
Net not routed not shown as error.
Maybe I'm missing something here. I have a board that is routed and I manually changed two components and manually routed them. After routing I knew I'd deleted a trace I hadn't reinstated.To be sure I highlighted the trace, here's what I saw, After refreshing the net list it showed all nets routed. However, the vertical trace in the picture is on the bottom layer and not connected to the horizontal one. Without highlight, #PCB#
How are these quantities worked out?
I've just got a quote for 5 boards to be assembled. The list of the selected parts is, OK, in the middle of the list is SPK1 - 1 per board = 5 needed. However, C1 - 1 per board - why 20 needed? R6, R7 - why 100 needed? A lot of the numbers above aren't divisible by 5. I.E. 34, 49, 62, 29. Most of the quantities seem to be wrong. Thanks for the help. Mike. Edit, OK, I can see that some are minimum quantities but the very top one isn't. BC857 - there are 6 on each board so the quantity should be 30 and the minimum is 15. So why 34? #PCB#
Why are all the prices & stock levels zero at the moment?
All parts currently have a stock level (at LCSC) of zero and a price of zero. I suspect this is something to do with the connection between the sites. Mike. #BugReports#
Why are (Doesn't support JLCPCB SMT service) parts in JLCPCB Assembled section?
Tonight I've been looking for a LDO 3.3V regulator. I select JLCPCB Assembled tag and "Linear Voltage Regulators (LDO)" and the vast majority are marked as (Doesn't support JLCPCB SMT service). Why are they in there? I would rather there were 2 devices that were supported than hundreds that aren't. I do not understand this logic. Mike. #PCB#
What does "Stock 0 (4453 for JLCPCB SMT service)" mean?
Today I needed a 100k chip resistor and searching the library found one with the above stock level. Does this mean there are none or that LCSC has zero stock but JLCPCB has over 4000 and I'm safe to use it. I cannot hand solder 0402 resistors!!! Thanks, Mike. #PCB#
Moving and rotating object using the API.
Hi All, I've got a board with over 200 LEDs on it and need to position them using code. I have a list of positions and rotations but can't work out how to do this in code. I can fetch the board using var board = api('getSource', {type: "json"}); and looking at the object, FOOTPRINT seems to be the area where my LEDs are stored but with a strange name (first is gge0c458c32494ef67c). Where (or how) can I find the position of LED1 and once found change it's position and angle? Or, is there a different API call to move/rotate objects? Looks like I need to use moveObjsTo but how do I find the name of the objects I need to move? I've tried api('moveObjsTo', {objs:[{gId:"LED1"}], x:20, y:20}); but think the name of the object is not LED1. Any help greatly appreciated. Mike. Edit, I've shared the project publicly (I think) under my user name (pommie). I think the URL is https://oshwlab.com/pommie/tic-tac-toe #PCB#