asdasdasd
Great Experience with 4-Layer PCB design
I recently designed and ordered some 4-layer PCBs for a quite complex commercial mixed signal project. This was my first 4-layer design for 10 years, my previous experience in Eagle was not good and I found this time using EasyEDA it was a much easier experience and the PCB that was manufactured was perfect. I did a second design replacing several chips to reduce the BOM and again the experience was easy and again the PCB worked first time. It may be just luck or it may be a case of how easy the software is to design with Anyway I am so happy and needed to share the experience Keep up the great work! #GeneralDiscuss#
rodyne 2017-02-23 22:56:36 comment 2 0 Others
Working on Bottom Layer of PCB
Feature Request Hi Guys When working on the bottom layer of the PCB Layout it would be good if you could turn the PCB over so that all the text and components are not reversed and it makes it easier to route. I am guessing this would be quite hard to do so I guess you could put it as low priority but it would be a really awesome feature.. Let me know what you think #FeatureRequests#
rodyne 2016-11-11 23:20:09 comment 10 0 Feature Requests
Cannot generate gerber files or order PCB
Hi Guys To reduce noise in my design I have made separate analog and digital grounds. There are two fill areas the net names are GND and AGND. the board looks good in the preview but when I press the manufacture button I get the message "Please build the copper area". All the copper areas are built and look good in the preview. Can you take a look please and see if it is me or a bug :-) Project link is https://easyeda.com/rodyne/RPI_GPIO_Motherboard_Rev_5-yUO6oiAR9 Cheers Boz #BugReports#
rodyne 2016-08-02 00:31:54 comment 4 0 Bug Reports
source code for small projects
Hi Guys Still loving this system, keep up the great work. I notice you cannot upload C files to the project so I tried to post 300 lines of C code (14KB) in a comment but the computer say no! Rather than putting it on github and linking, for small projects it may be easier and more complete to be able to put the source code with the project to keep it all together, what do you think? Boz #FeatureRequests#
rodyne 2015-12-21 18:18:07 comment 3 0 Feature Requests
Next Version?
Hi Dillon I have been using Version 2.1.1 in the sandbox for my last two boards and it seems to be quite stable and has some nice features. When do you plan to upgrade the main site to this version? Thanks Boz #Schematic#
rodyne 2015-03-13 23:02:15 comment 4 0 Circuit Design
Ground Copper area
BUG Concise problem statement: Have created a PCB with filled copper ground on top and bottom layer. These ground fills are not showing in Gerbers https://easyeda.com/file_view_MLP-DIP-PCB_cGSQqBzx7.htm #BugReports#
rodyne 2014-11-18 03:36:56 comment 4 0 Bug Reports
MOSFET SOT23 libraries need correcting
BUG I believe the standard MOSFET libraries are incorrect. If you place a P or N Channel MOSFET on a schematic, set the package to SOT-23 or WSOT-23 the resulting PCB footprints are incorrect and the source and gate are reversed. All the SOT23 MOSFETS I have used follow the same layout eg look at the datasheet for a 2N7002 or an SI2301DS or a SI2302DS all of which are really common. I have created my own MOSFET parts to work around the problem for now. #BugReports#
rodyne 2014-08-01 23:00:04 comment 7 0 Bug Reports
copy paste of attribute text causes small problem
Hi Dillon Latest version of software is extremely stable, I am very impressed :-) I did find a minor problem when using the schematic editor. When copying and pasting text which is part of a component attribute, when I paste the text it puts the text on the screen but does not allow me to select or modify the text and it cannot be deleted without pressing undo. Steps to reproduce bug: Select the name attribute of any component on your schematic using ctrl-c (select from schematic not the properties window) paste using ctrl-v new text cannot be selected to edit and if you try and delete it says "field cannot be removed" Results: Expected results: it should probably just paste as normal text not linked to original component I would put the priority on this as very low. Browser: Google chrome. #BugReports#
rodyne 2014-06-23 08:34:20 comment 2 0 Bug Reports
copper area flows over board outline.
BUG Copper area flows over board outline (cut-out area) Steps to reproduce bug: Open Project https://easyeda.com/file_view_C2-PCB_3fmgMGcuM.htm look at bottom copper layer Browser: google chrome #BugReports#
rodyne 2014-06-08 07:09:15 comment 5 0 Bug Reports
Editing package looses schematic!
BUG Concise problem statement: hi dillon If I an editing a schematic and I select a package I get the preview of the package in a small window the bottom right of the screen. When I press the edit icon on this window, the main window (my schematic) is replaced by the PCB layout tool, but the toolbars are still the schematic tools not the PCB tools (no layer toolbar) Steps to reproduce bug: select any circuit, select any component, double-click on package and select a new package and see the new package in the bottom right window (I selected FPC 31 package) Click on the preview window edit button Results: Expected results: You edit package in a new window and have PCB editing toolbars Url: https://easyeda.com/editor#id=k20mjF1nJ Browser: google chrome windows 7 #BugReports#
rodyne 2014-06-07 22:54:21 comment 4 0 Bug Reports
PCB Slot Cut-out
How do I make a cut-out in my PCB ? I require a slot to route a GLCD FFC cable through from the bottom layer to the top layer I have drawn a square in the board outline layer but this does not show in the gerber See file https://easyeda.com/editor#id=1ki2o8tdT|3fmgMGcuM thanks boz #PCB#
rodyne 2014-06-07 03:07:15 comment 3 0 Circuit Design
Drill holes
Hello Simple question, How do I make drill holes in a PCB? I'm sure its obvious, but I cannot find in help tutorial and I cannot find a suitable layer to draw circle on, when I draw a circle I only have 3 layers available and non seem obvious Thank You Boz PS Routing a complex PCB at the moment and its going quite well :-) #PCB#
rodyne 2014-06-06 23:29:35 comment 9 0 Circuit Design
Version Control
Feature Request Hi. I am not sure if there is version control, but if I Order a PCB (Like the ones I recently ordered) I would really like to keep a read-only snapshot of the PCB and schematic files at that point of manufacture. (or make the files read-only so I can clone them) This is because I may modify the files while they are being manufactured and I would lose information on the boards being manufactured, then it would be difficult to test them. Changing the boards would be bad for the PCB manufacturer, they may pick up the CAD files after I make a change. When I get the boards back and need to fix errors I still have a reference of my old board. I may want to revert back to this known good board if I screw things up. I have to do this manually at the moment and remember not to modify any files sent for manufacture! I would also like a flag to indicate the manufactured board works or not. I hope this is not too much to ask as it would make the system much more professional than other packages. #FeatureRequests#
rodyne 2014-05-01 00:59:51 comment 3 0 Feature Requests
Order PCB Question
Hello When you press the Order PCB shopping cart button What is the field "open project" for? 2 the country always defaults to poland. #PCB#
rodyne 2014-04-27 04:42:10 comment 1 0 Circuit Design
Canvas size
Hello Dillon How do I change the canvas width of my schematic. It will not increase from 1467, I right click on blank canvas and try to change canvas attribute "width" I can edit text but it always goes back to 1467 I am not sure if it is a bug or I am using it wrong Thank you #Schematic#
rodyne 2014-04-14 17:28:43 comment 7 0 Circuit Design
Ratlines and routing
Feature Request Hello Dillan When I'm routing a board it would be good if once you select the pin to route it highlights all the pins on the net. Currently it eliminates the other net ratlines (which is good) but this does not help as it does not show you closer pins nor do the ratlines snap to a closer route like on other PCB packages. Just a thought :-) #FeatureRequests#
rodyne 2014-04-07 13:26:27 comment 1 0 Feature Requests
Merging of nets during routing warning message
BUG When you accidentally merge two nets when routing you get a warning/confirmation message about merging two nets, when you press cancel it still lays the trace and merges the nets. Expected results: The expected result if you press cancel should be that the track does not get laid. Also this box would be more correct as Yes/No not Yes/Cancel Browser: Google chrome Cheers #BugReports#
rodyne 2014-04-07 13:17:15 comment 3 0 Bug Reports
Flag for project in draft
Hello Guys Really enjoying using the system, can I make a suggestion that you can put an "In Draft" flag against your schematic or PCB so that even if it is public it will not show in an unfinished state, you can also hide any unfinished projects from your examples. Thanks and keep up the good work. Boz #FeatureRequests#
rodyne 2014-04-06 23:46:01 comment 1 0 Feature Requests
Label text restored to wrong position after save
BUG Concise problem statement: Saved the schematic and closed the browser, but when I re-opened the file 3 of the label texts were not restored in the correct position. Happened twice! see https://easyeda.com/jBTb5mEWQ8 Steps to reproduce bug: Open the above schema move the 3 labels TFT-RD~, TFT-WR~, TFT-CS~ Save the schema Re-open the schema and notice they have moved Maybe the ~ a special symbol ? I will test without a ~ in the label Browser: Chrome on Windows 7 64bit #BugReports#
rodyne 2014-04-05 08:58:58 comment 2 0 Bug Reports
Cannot pan full extents
Minor BUG Concise problem statement: Hello Dillan If I add components to my schematic outside the current horizontal scroll area I cannot pan (using right click and drag canvas) to see the new component fully. I need to zoom out and back in to bring it fully into view Steps to reproduce bug: Scroll to left most part of canvas Place component on very left of canvas so that some of it is off the screen Try and pan screen to bring it into view Results: Can pan canvas but not enough to bring whole component into view Expected results: Canvas will expand so that I can pan component into view Url: https://easyeda.com/editor#id=O0UO6oiYf Browser = Chrome/33.0.1750.154 #BugReports#
rodyne 2014-03-22 05:07:41 comment 1 0 Bug Reports
Support form does not close aft post
BUG Concise problem statement: Pressing submit button using the support or "ask a question" form does not close the form after the question or bug report has been posted resulting in duplicated questions Steps to reproduce bug: Press ask a question Enter text Press submit Results: Text is submitted but form does not close Expected results: Submit button on a form should post the text and close the dialog box (you should also have a cancel button in case I change my mind) I'm Really loving the system by the way :-) Url: N/A Chrome/33.0.1750.154 #BugReports#
rodyne 2014-03-22 05:03:18 comment 1 0 Bug Reports
Undo causes bug
BUG Concise problem statement: Steps to reproduce bug: 1. 2. 3. Results: Expected results: Url:(click the Share my works button to get it) Browser:Mozilla/5.0 (Windows NT 6.1; WOW64) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/33.0.1750.154 Safari/537.36 errMsg:#browser: chrome; type: undefined; string: SyntaxError: Failed to execute 'querySelectorAll' on 'Element': '#' is not a valid selector.; stack: Error: Failed to execute 'querySelectorAll' on 'Element': '#' is not a valid selector. at Object.History.$o0101 (https://easyeda.com/lib/min/editorSCH.min.js:7:11391) at Object.History.$o0100 (https://easyeda.com/lib/min/editorSCH.min.js:7:17715) at Object.History.$o099 (https://easyeda.com/lib/min/editorSCH.min.js:4:29677) at Object.History.go (https://easyeda.com/lib/min/editorSCH.min.js:6:4644) at callCommand.registerHook.undo (https://easyeda.com/lib/min/editorSCH.min.js:5:30676) at callCommand (https://easyeda.com/lib/min/editorSCH.min.js:1:116) at HTMLDocument.handleKeydown (https://easyeda.com/lib/min/editorSCH.min.js:2:14516) #BugReports#
rodyne 2014-03-21 07:46:01 comment 1 0 Bug Reports