Imported board outline from DXF - absolute positioning
I have a complex board outline that has been created in another CAD system which I have imported as a DXF. I am having difficulty in locating the imported drawing precisely on the coordinate system in easyEda. I would like to be able to group the entire drawing (which I can do using the mouse) and move it by specifying the coordinates. Dragging it all with the mouse is not accurate enough. I was hoping to be able to group all the objects as one and then adjust the coordinates of the group - is there any way I can achieve this? Currently the entire 'drawing is out by 0.044mm on the y-axis and 0.248mm on the x-axis It could be argued that this may be close enough - and it would be if I were not having to place components that connect to the outside world which is governed by the external cad system. I can obviously adjust the coordinates of each component to be relative to the current board location but it would help me a lot if i could get the design central on the coordinate system in easyEda to start with. - RIchard #PCB#
Autorouter will not route ANY tracks on some designs
This has to be something to do with the design but I cannot see what. The autorouter is installed and running locally. I make a new board and run the autorouter and it will just sit there and eventually time out. The autorouter window shows continual: Simplex.cutout_from: division line us null Simplex.calc_division_lines: division not found What can i look at in order to resolve this? - Richard #BugReports#
Footprint and Symbol creation delay
Hello everyone, I just made a new PCB footprint, I also made a PCB Symbol to link to the footprint. When editing the symbol I seem unable to find the newly created footprint. If I try and find the symbol to place into a schematic it cant find that either. Is there some delay between creating the symbols/footprints and them becoming available to use? I named the PCB Footprint and the symbol MG-17F, I created another footprint and symbol MG-17F-RCS just in case it helped - it did not! Thank you for your help ** UPDATE ** I managed to find the footprint in the symbol editor by specifying the Classes as 'Workspace' and it found the symbol I had created. The Symbol could still not be found when trying to 'Place' a symbol in the schematic editor. ** UPDATE ** - Richard #GeneralDiscuss#
AutoRouter creates many DRC Errors
I have a board design that I have used with the autorouter with mostly complete success. I have just changed some components on the board and now the autorouter (local) is completing but it is creating many DRC errors, mostly with duplicated traces for the same net all of which overlap other traces. I have tried using the locally installed editor as well as re-downloading the latest autorouter and the result is the same: In the picture above you can see that the bottom layer traces appear to be overrun with traces on top of traces. I have experienced this kind of behaviour before then some times it just seems to go away. Is this expected behaviour or is there something I can look at changing to stop this happening? I just tried removing all the trace widths for special nets and thought that had fixed it but on closed inspection there were still many errors: Interestingly, in the bottom picture, the same net had been routed twice, once successfully and once just cutting across lots of other traces. It's as if the autorouter is applying traces and then not removing them as it tries other routes. Also interestingly, for the first time I noticed errors in the autorouter screen: Is this normal / expected behaviour? - Richard #BugReports#
AutoRouting Stalls
I have been using EasyEDA for over a year now and love it. Recently I have come across an issue whereby the AutoRouter stalls and will never complete (my designs are very simple). By accident I found that by going back to the schematic, changing a component and saving, import changes to PCB, it would then AutoRoute again without any issue. If I monitor the AutoRouter window I can see the following: --------Connection Established-------------------------- Start Routing... Routing --------Connection Closed---------------------------- The 'Connection Closed' comes up shortly after it has router only a few tracks. EasyEda Designer just sits there waiting for the AutoRouter but nothing ever changes. Is this some 'fault' in my design? I get the same results using a different PC. HELP! Richard #BugReports#
Auto Router suddenly started routing tracks on top of tracks
I have been using EasyEda for over a year now and have made many boards. Now, all of a sudden (apparently) I am seeing silly errors in track routing which result in DRC failures and I have failed to work out what I am doing wrong. It might be that I have made some bad changes to track width settings but I am not convinced. Here is one such problem whereby it has routed two nets on the same side and they cross! Here are my track settings: I have one special net track width as follows: The AutoRouter I am using is v0.81 though I think that EasyEDA is now a newer version. Where should I be looking next? *CHANGED TO BUG REPORT* Richard #BugReports#