Why is the silkscreen of footprint different than what it should be?
I'm reading Andy's helpful hints before printing PCB. I now understand that a silkscreen should never be printed over an SMD pad. My resistors all have silkscreen over pads. Ok, so edit the footprint... guess not. The footprint and what is on the PCB are two different things. Please help me understand how to fix this. (I could manually ungroup each one, but I have over 100 of them) I'm using the same package, tried Update PCB and still the same issue; the silkscreen of footprint is over SMD pads (but in manager it is clearly NOT)... I'm confused. #PCB#
Is it ok for Silkscreen to go on a copper area/layer?
I have silkscreen on the bottom and top layers. On the top layer I use a GND copper pour over the layer. This is my first PCB, I'm learning and I learned that silkscreen over SMD pads is bad. Is it ok to silkscreen on top layer with a copper pour? I will be using the default PCB setup (default settings for PCB quote). #PCB#
Copper area connections are shown as "not connected"
When I connect a pad or PTH to VCC copper area it seems connected, but I still see ratlines [AND DESIGN MANAGER SAYS NOT CONNECTED]. I have dozens of VCC connections and I'm not sure if they are connected or not... If copper area still shows ratlines, ok... BUT HOW DO I CONFIRM ALL ARE CONNECTED? - I don't want to disable the entire net and miss a connection... please advise. Example Picture: (notice all the ratlines, for VCC and GND, haven't added GND copper area yet, but I did add VCC, as you see, VCC connections LOOK connected, double checked, but I see ratline AND THE DESIGN MANAGER RED X) #PCB#