PRO: Offset Relative is broken when multiple objects are selected
- new PCB - create 2 pads, one centered at (0,0), the other nearby - select both pads - right click -> offset -> relative offset - for the 'please select a reference point' choose the center of the 1st pad at (0,0) - in the popup dialog: - NOTE: the "Reference X, Y" position is (0,0) - change the "Reference X" value to 1mm - click 'Confirm' it moved the pads, but the 1st pad isn't at (1,0) as specified. BUG: it moved the _center_ of the two pads to (1,0) what's the point of asking for a reference point if it's always going to move the center? that makes no sense. #PCB#
PRO: controlling net uniqueness for repeated reuse blocks
let's say I have: - a Reuse Block 'A'. 'A' has NetPorts for power & ground, and various nets (eg. '$1N10670') between its components - a board 'B', with power & ground if I add 2 copies of the Reuse Block 'A' to board 'B' I get 2 copies of each of A's nets on the PCB (eg. 2 copies of '$1N10670'). - I get ratlines telling me I need to join power & ground, this is good - that's the purpose of NetPorts, right? - but I also get ratlines (and DRC errors) telling me I need to join the two instances of '$1N10670' together. I don't want this. I need the internal nets of each copy of A to be independent. how do I control which nets are to be connected (eg. power & ground), and which are to be separate (eg, '$1N10670') ? I had assumed that nets connected to NetPorts would be common, and other nets would be separate. but this doesn't seem to be the case. I also see mention of 'prefixes' in the docs, but I can't find anything about that in the UI. on a possibly-related note: it seems that the designators for the two instances of A are duplicated, also (eg. 2 copies of 'R27'). this causes issus during component placement in PBCA. #PCB#
PRO: create rule for text/copper overlap?
on this page: https://jlcpcb.com/blog/288-technical-guidance-character-design-specifications it says: characters overlapping with solder pads or copper areas within 0.15mm will be removed. is there a way to create a design rule to check for this? #PCB#
[Warn] : The number of components in the following group templates is inconsistent with the reuse group, and the missing components are automatically ignored:
I get this error when using "Update Place and Route from Reuse Template" [Warn] : The number of components in the following group templates is inconsistent with the reuse group, and the missing components are automatically ignored: what does this error mean, and how do i work around it? I'm doing the following: - create new schematic - place Block Symbol into it - convert to PCB. Block Symbol is messed up on PCB, components are in the wrong places. - open "Update Place and Route from Reuse Template" dialog - choose the Symbol Block in the list - the "Updated Version" image on the right looks good. - "Confirm" - Log shows the above error, nothing is changed in the PCB. #PCB#
duplication of netport name
I have used Net Ports to connect components in my schematic. when I do "Generate/Update Block Symbol" it says: Found the schematic Netport(s) doesn't the name of the Block Symbol pin(s), do you want to update the Pin(s)? I say "Yes" to this and then it spews a bunch of errors in the Log window: 2024-01-09 01:30:40[Error] : BlockSymbol : vcf's bottom Schematic's Netport, -12V、-12V、-12V、-12V、-12V、-12V、-12V have no matching Pins in BlockSymbol 2024-01-09 01:30:41[Error] : duplication of netport name!/-12v($1I578,$1I588,$1I2314,$1I2554,$1I3015,$1I3944,$1I4670) 2024-01-09 01:32:11[Error] : BlockSymbol : vcf's bottom Schematic's Netport, -12V、-12V、-12V、-12V、-12V、-12V、-12V have no matching Pins in BlockSymbol I don't want to create pins in the block symbol for that net. - Is it the use of Net Ports that causes this? - If I use Net Labels instead I don't get this error, but Net Labels don't look like how I want on the schematic, they're just text - i want something that looks like a Net Port, but that doesn't error when I create the Block Symbol. #Schematic#
rectangle selection keeps selecting too much
https://codewithoutborders.com/posted/selection_bug.webm - rectangle select some components - it selects more than I want. I have NO groups defined. this only happens on one of my boards, and i can't work out why. other boards in the same project work fine. on this board, i can't even select a section of a trace. it always selects the whole net. #PCB#
"Place Block Symbol" / "Place Block" doesn't retain PCB layout
- create a board "B1" - on B1 add a schematic, add some components, wire them together, convert to PCB, route the traces - right-click B1's schmatic -> "Generate/Update block symbol" - create a board "B2", open B2's schematic - right-click B1's schematic -> "Place Block Symbol", place 2x B1's symbol on B2's schematic - convert B2's schematic to PCB. NOTE: it just adds the components from B1's blocks to B2's PCB, it doesn't retain the layout OR the traces. #Schematic#
PRO annoyances
just collecting a bunch of minor annoyances i found EasyEDA PRO: please let me know if i'm just doing it wrong. PCB: - moving a hidden Copper Region and then hitting UNDO un-hides the copper layer (although it still appears hidden in the 'Object' pane. - need a command/hotkey to re-fill all Copper Regions (maybe also option to re-fill after each modification) - after locking a Copper Region that covers the whole board, it's impossible to draw a selection rectangle, or click _anywhere_ on the board outside of a component without it popping up the modal "Locked objects found, please choose your operation" dialog. this completely breaks all UI that involves clicking in empty space. all i need is a way to stop moving my copper regions all the time - a hidden layer should not respond to mouse clicks. if i want to select it, i can go to the 'Object' panel. - can't drag a section of trace to the other side of a via/hole: Device search: - needs access to user-contributed components from STD - need "basic parts" checkbox - need 'reset' links for search attribute listboxes - need column sorting for 'Detail List' search results - selecting multiple entries in a search attribute listbox should return the UNION of those results. currently it returns the INTERSECTION, which just results in ZERO results - useless. you should be able to select a range of acceptable values and have it return results that match _any_ of those values. - need an option to remove unavailable item from the search attribute listboxes, not just grey them out or disable them - remove them entirely. - columns & dialog need to be resizable. - selecting a top-level category overrides the text search & visa-versa. eliminate this override, or add 'search within results' textbox. general: - "Commonly" is an adverb, not an adjective. #PCB#
EasyEDA Pro: where are the user-contributed footprints?
in easyeda standard there's a rich library of user-contributed footprints available: but in "PRO" I don't see these anywhere: where have they gone? #Library#
add/merge trace segments
please make it possible to add or delete trace segments (in the middle of a trace). #FeatureRequests#
undo trace segment
when laying a PCB trace with multiple segments, it would be great if ctrl-Z could undo the previous segment (click). currently ctrl-Z during trace laying undoes the action that occurred BEFORE starting the trace. #FeatureRequests#
bad pins for arduino_pro_mini libs
the arduino_pro_mini pcb libs in the 'System Components' all have bad numbers for the A4-A7 pins which means the nets don't match up with the schematics. #BugReports#
switch units in 'new PCB Lib'
how do you switch units while editing a new PCB library part? why can't i just type a unit suffix into the properties boxes? #PCB#
use existing net name when placing netLabel
when placing a netLabel on a net, please use the existing name of the net, instead of 'netLabelN'. the existing label of the net can be seen in the PCB editor. also, please display the net name in the schematic properties panel, and allow it to be editable. #FeatureRequests#
TAB to toggle between PCB & schematic
it would be great if the selection could be mirrored between the two views, so you could select an IC or wire in the schematic, hit TAB, and it would switch to the PCB and have that same IC or trace selected (and possibly centered) in the PCB view. #FeatureRequests#
always highlight selected net?
so, you can hit 'H' to highlight the selected net. is there a way to have it always hilight the selected net, without having to hit the 'H' key? #PCB#
show pin name instead of number for disconnected pins?
is it possible to have it show the name of disconnected IC pins instead of their numbers? #PCB#
ESC doesn't cancel placing pasted component
BUG Concise problem statement: Steps to reproduce bug: select a component hit ctrl-C hit ctrl-V hit ESC Results: unlike when placing a component from the library, ESC doesn't cancel the placement of pasted components. Expected results: ESC cancels placement. Browser: chrome, win10x64 #BugReports#
can't rename project
BUG Concise problem statement: Steps to reproduce bug: go to account page click on edit button for a project change project name click save Results: "please input the content" Expected results: rename the project! #BugReports#
the "New Project" button doesn't create a new project
it just creates a new schematic in an existing project called "New Project". this is really confusing as it keeps popping up dialogs complaining that the project has multiple schematics, merging schematics, etc... all i wanted was a new project! #Schematic#
is it possible to limit the set of trace widths?
so i don't have to scroll through all the different values i don't need when changing trace width? also, how do you change the width of the subsequent legs of the trace? also, is it possible to change the width of a trace, or part of a trace, after it has been laid? #PCB#
why doesn't new net label acquire existing net name?
when adding placing a new net label on an existing net, why doesn't the new label acquire the existing name of the net? #Schematic#
allow direct editing of a wire/junction's net name
it would be great if you could directly edit the net name of a wire/junction in the properties window without first having to create a net label. i don't necessarily want a label in my schematic, but it is helpful when laying out the PCB to see non-cryptic net names when hovering over pins. #FeatureRequests#
filter component search by symbol/footprint availability?
when searching the library for parts, i'm only interested in seeing those search results for which BOTH schematic symbols AND PCB footprints are available. is there a way to filter the results based on the availability of these two features? #Schematic#