Specifying and sizing individual components
Hello, I'm a beginner and still trying to get to grips with EasyEDA and have done some searches on this but can't find a solution. I've built my schematic which seems to pass the checks and I've now moved to designing the PCB. The problem I'm having is the components in the layout aren't reflecting the actual size of the components that I want to use in the project. The resistor outlines are physically too large for the 0.25w resistors I want to use. How do I change this? The choices in the EE library are confusing and I'm not understanding the nomenclature used. Similarly on Capacitors what do I need to select to get the right physical size for say a 100nF polyester capacitor. Similarly my project requires the use of J201 transistors but the pin out is different from standard NPN and PNP transistors that I have in my schematic, so the connections are incorrect on the PCB. I can't see an option for this transistor in the library. I searched and found a J201 layout here. https://easyeda.com/theampbuilder/component/J201-kEQpZXVv5 but I don't know how to use this or put it into my project. Can anyone help with this? My project is here: https://easyeda.com/star130y/buffer-splitter #PCB#
Complete beginner with schematic - Net errors
Hi I'm really struggling to get started with EasyEDA. I have a very basic amplifier circuit with a single transistor and have drawn the schematic but when I check it to go forward to the PCB design it comes up with NET errors saying the circuit must have more than 2 pins? I was under the impression that I didn't need to configure pins as I wasn't using a chip.? Capacitor C1-2 seems to be throwing an error. I also have 2 wires going to a potentiometer to the right of the schematic which isn't showing as I don't want to mount the potentiometer on the board. How do I deal with this? Thanks! https://easyeda.com/star130y/booster2 #Schematic#