asdasdasd
How to look at previous versions?
I have several projects that I've saved different versions. How can I look at the schematics or PCB for them? I'm pretty sure I used to be able to pull them up. They are in the list in Project Versions, but don't appear to have any data associated with them. #GeneralDiscuss#
terryjmyers 2018-11-27 03:18:14 comment 1 0 Others
Minor documentation error
The note "EasyEDA does’t support inner copper pour or copper overlap now, but we will support that in the future, if you want to pour the inner area, please use Solid Region." relating to the "inner copper pour" in https://docs.easyeda.com/en/PCB/PCB-Tools/index.html#Copper-Area does not seem to be correct. I am able to do this and the gerbers generate just fine Suggest deletion of "inner copper pour" text from this statement. #BugReports#
terryjmyers 2018-07-18 07:55:59 comment 1 0 Bug Reports
Cannot Add node to CopperArea
I'm no longer able to add a node to the CopperArea object. Previously I have been able to simply double click on the edge and a new node will appear, like a trace. But this is no longer the case #BugReports#
terryjmyers 2018-07-17 02:22:35 comment 1 0 Bug Reports
Rating System for schematic and footprint symbols
I recently used a schematic symbol I found that was wrong and cost me a few weeks because I didn't check it thoroughly. The symbol still exists in the database so someone could get tripped up. It would be nice to be able to report it as faulty (wrong dimensions, wrong pin out, etc). Even a thumbs up thumbs down would be useful. Then you could use that data to move more relevant schematic and footprints to the top of the search list. FYI, the schematic symbol that has the wrong pinout is a user contributed "MAX31856". Its the one that doesn't have a contributor, package, or description. The MOSI and MISO pins are reversed. It should just be deleted..... #BugReports#
terryjmyers 2018-06-01 07:47:56 comment 1 0 Bug Reports
Ordering 1.0mm PCBs does not transfer gerbers to JLPCB
Issue: Ordering 1.0mm PCBs does not transfer gerbers to JLPCB Steps to replicate: 1. Select "Generate Gerber" 2. Change PCB Thickness to 1.0mm 3. Press "Order at JLPCB" 4. Select "Continue" 5. JLPCB website opens\, Gerber files DO NOT transfer automatically Additional information. It seems that ONLY 1.0mm thickness does not work. All other thickness work fine. Issue reproducible in both FireFox and Chrome. #BugReports#
terryjmyers 2018-05-21 06:07:58 comment 1 0 Bug Reports
Footprint Manager in Firefox minor issue
Moving the schematic symbol on the left (Top middle left) using the Footprint Manager in Firefox v59.0.2 (64-bit) is buggy. The schematic symbol jumps around #BugReports#
terryjmyers 2018-04-24 09:15:46 comment 1 0 Bug Reports
Schematic layout: Selecting Red text has no feedback
Very Very minor annoyance: In schematic layout, when a component or text is selected it turns red to give the user feedback that it has been selected. However when a component or text field is already red, it does not provide any feedback. Its probably not worth doing much about it in the grand scheme of things, but I thought I'd throw it out there nonetheless. #FeatureRequests#
terryjmyers 2018-04-01 01:36:34 comment 1 0 Feature Requests
List of bugs
Ok..so here is a list only because I didn't want to spam this forum with individual items. In the past when I've submitted issues in a list form, each item was addresses individually. I appreciate the very quick and thorough response times from your development team! Keep up the good work and let's make this product the best! Bugs in PCB editor: Undo (or cntrl-Z) does not work after changing grid size. pressing cntrl-Z three times undoes the grid size change. Grouping / Ungrouping doesn't seem to work at all. I want to be able to group my sub modules (10 components relating to a particular PCB feature), so that I can just move them around as a group. But I'm unable to do this at all. When placing a VIA near a track it will usually display the yellow X meaning its too close, but really..its not. Because if you CUT the track then PASTE it, the yellow X disappears. To reproduce: Set units to mm. Set Design rules to the following: 0.152, 0.152, 0.152, 0.152, 0.254, 0.305. Create a TopLayer track in the shape of a square 2.5mm in a side Place a VIA inside (0.62mm diameter, 0.3mm hole Yellow box appears CUT the square track, then PASTE it back into relative position Yellow box disappears Note that you can also get rid of the yellow X by saving, closing out, and reopening the layout after step d above Changing properties and pressing ENTER doesn't seem to work reliably. To reproduce: Create a 0.9mm wide track Press ESC to deselect and change tools to pointer. Select the track In Track Properties should be: "0.9mm". Type "1" and press ENTER Nothing happens (most of the time) Note that if you "play around with it" long enough it starts to behave properly(i.e. typing a new value and pressing TAB properly changes the width as expected, typing a new value and clicking out of the box with the mouse changes the width as expected, etc). The same thing happens when you try to change the grid size (not reliably reproduce able) Suggestions or things that aren't bugs..just unexpected behavior If you CUT a component, then PASTE it, it treats it like a new component and changes the prefix. I can understand COPY then PASTE doing this, but not CUT and PASTE The new feature of double clicking a track in schematic or PCB layout and opening the properties panel is not really efficient. I liked the previous versions behavior of adding or deleting a vertices. At the very least it should ONLY open the dialog box or ONLY add/delete a vertices. The fact that it does both is...not really appropriate. Besides, when you select a track, the track properties is already on the right side, whey would anyone want to open an additional dialog box with the same information?? Using Google chrome is browser #BugReports#
terryjmyers 2018-03-28 21:31:56 comment 1 0 Bug Reports
Schematic connecting indicators at every node
Show connecting nodes at every vertice. Refer to the following screenshot: https://imgur.com/hjDpHtu. The top of C21 does nto have a red circle showing that it is connected. While this is okay, the red circle provides feedback that it is positively connected. Sometimes after editing a schematic for so long somethings get shifted by a pixel or two and LOOK like they are connected, but are actually not. Providing the red circle at every single connected vertice would provide the user with positive feedback that the points are connected. As another example refer to this screenshot: https://imgur.com/sJPYNZt. It would be nice to have the red circle at all of the highlighted areas. The bottom of R12 is NOT actually connected (its off by a pixel or two from being moved around so many times), and almost screwed up my PCB layout. #FeatureRequests#
terryjmyers 2018-03-28 21:29:41 comment 1 0 Feature Requests
PCB editor grouping list tree
I am an industrial control engineer who uses graphic editing software to create user interfaces for industrial control systems. A feature that is often included in professional software packages that it most useful would be a floating "sub-window" (like the PCB tools, or Layers tiny floating popups) that shows each footprint in a list tree view. When the item is clicked on, it would refocus the screen on that object. This tree view would also properly show the groups that have been created with the ability to drill into the group and select an object in a group. I've provided a screenshot of a program called FactoryTalkView SE from Rockwell Automation that shows this feature: https://imgur.com/a/NxDsh. This feature would allow grouping to become very useful. The way they handle selecting is pretty good as well. If you want to select something in a group, LEFT CLICK once to select the group. then DOUBLE LEFT CLICK to "enter" the group, then LEFT CLICK to select the component in the group (or a sub-group). This way groups can be embedded within groups. In order to "drill down" without using the tree list, you would CLICK..DOUBLE CLICK...CLICK...DOUBLE CLICK...etc. CLICK to select, DOUBLE CLICK to drill in one level. #FeatureRequests#
terryjmyers 2018-03-28 21:28:57 comment 0 0 Feature Requests
Footprint Manager issue
assigning multiple devices to the same footprint in the Footprint Manager has a minor issue. Steps: 1. Create a project with say 5 resistors (let's say 0805 size). On each resistor delete the footprint assignment 2. Open the Footprint Manager and they will all be highlighted red on the left, because they have no footprint assigned. 3. Select the first one on the left. Search for 0805 in upper left, highlight the appropriate footprint: "805" on the right middle, and press UPDATE on the bottom right. No problem. 4. Now select the second one down from the list on the left. The schematic symbol loads, but the footprint picture that was in the middle right disappears. It is still selected (or at least highlighted) on the right middle. 5. You can't even select the footprint again (by left clicking the already highlighted correct footprint). You must de-select it (by perhaps selecting a different, incorrect footprint)...then re-select it 6. Now you are able to hit Update #BugReports#
terryjmyers 2018-03-28 05:42:24 comment 1 0 Bug Reports
FDS4559 chip doeesn't work
BUG Concise problem statement: Steps to reproduce bug: Try placing an FDS4559.1 chip, and an FDS4559.2 chip Results:The FDS4559.1 looks fine, but the FDS4559.2 places as a new chip, not the second half of the first chip Expected results: Browser: #BugReports#
terryjmyers 2018-02-16 10:33:58 comment 1 0 Bug Reports
unable to use "~" at the start of text
BUG Concise problem statement: Steps to reproduce bug: Add a text field to a schematic type: "~15V" Results: text appears as "15V" instead of "~15V" Expected results: "~15V" Browser: Chrome #BugReports#
terryjmyers 2018-02-08 12:30:46 comment 3 0 Bug Reports
Lock horizontal or vertical
Feature Request Brief title for your desired feature: Lock horizontal and vertical while pressing a hotkey How would you like the feature to work? in schematic and PCB layout mode holding CNTL and dragging a piece would lock the movement into a vertical OR horizontal only movement. Basically force moving in a straight line. Why is this feature important to you? Sometimes you don't want to move freely or by the grid. You just want to move precisely to the left or down or whatever #FeatureRequests#
terryjmyers 2018-02-08 11:16:48 comment 15 0 Feature Requests
Multi-schematic project places components with already used tags
BUG Concise problem statement: Multi-schematic projects auto-assign component prefixes to prefixes that are already used Steps to reproduce bug: Create a Project with multiple schematics Place resistors on one schematic, they are auto assigned R1, R2,...Rn. Place resistsors on a different schematic, they are ALSO auto assigned R1, R2,...Rn. Try to create PCB. Results: PCB creation fails due to duplicate prefixes Expected results: The system should look at all schematics in the projects to auto-assign new prefixes Browser: Chrome #BugReports#
terryjmyers 2018-02-05 04:28:07 comment 3 0 Bug Reports
Bugged Footprint Lib: cannot assign PCB Footprint
I have many at least 50 PCB schematic Libs with at least 50 foot prints. I've never had any issues linking them up or using them in a PCB I've actually created and ordered. For some reason I am unable to assign the footprint I have labled "MICROSD MODULE 0.1 HEADERS BUGGED" to any Schematic Lib. specifically I'm trying to assign it to "MicroSD Module 0.1" Headers". In order to get around this I literally just copied everything to a new footprint lib. When I named this library anything called "MICROSD MODULE 0.1" HEADERS XXXXX" where X was any other text, the footprint library got bugged. I finnally just copied everything (again..from "MICROSD MODULE 0.1 HEADERS BUGGED") to a footprint called "MICROSD CARD BREAKOUT" and was able to assign it to "MicroSD Module 0.1" Headers" without problems I thought someone might want to take a look at this to see what went wrong. I'll keep it around for a few weeks. #BugReports#
terryjmyers 2018-01-11 08:59:48 comment 4 0 Bug Reports
NPTH not surrounded by copper fill does not show up when exporting
If you have a PCB layout with a NPTH cutout, it does not export well to PNG or PDF. If you have the NPTH surrounded by copper fill it shows as black. This too is not desirable. It should show up as grey...the way it looks during design time. #FeatureRequests#
terryjmyers 2017-12-30 03:06:58 comment 0 0 Feature Requests
No Upload feedback for adding a cover picture
When Adding a picture to the project as the cover, there is no feedback that its in the middle of uploading. The user thinks that its immediately there as the thumbnail appears immediately. After adding a cover picture once, it doesn't seem possible to change it again. If I select another picture the thumbnail of the new picture immediately appears, but no upload is started(watching my upload speed). When the save button is pressed with a new cover picture added it appears to start uploading (Ethernet upload speed increases to a reasonable amount), however it seems to fail and some some Chinese characters appear in red under the save button about 30 seconds, and the page never actually "saves" It doesn't seem possible to change the cover picture more than once. #FeatureRequests#
terryjmyers 2017-12-17 11:26:13 comment 0 0 Feature Requests
My long list of gripes
Exporting to a PNG (and probably other things) does not show NPTH solid regions (in board cut outs). For example, File->Export>PNG-> Active File->Image. Does not clearly show cutouts. Cannot name a package the same as a Schematic. You can, and it works, but it just throws an error. Try creating a schematic lib and a PCB lib with the same name Rapidly selecting menus in the parts browser does not "keep up" with my mouse clicks. One would expet it to ultimatly show the last thing you click on, but it does not when Editing a project selected from https://easyeda.com/projects/mylists, The Contect box is required to have something in it, even if it had nothing before. I just wind up putting a period(".") in the box just so I can hit SAVE when Editing a project selected from https://easyeda.com/projects/mylists, "Unknown" is mispelled in the License drop down When editing the component from when https://easyeda.com/projects/mylists, by pressing the "hamburger menu" to expand a project, then selected edit on the individual components, the green SAVE button has chinese characters. Also pressing SAVE doesn't actually do anything. Its like this popup doesn't actually do anything Changing the layer of an imported image does not automatically mirror the image like a component. One would expect it to do this so you can put a logo on the bottom of the board. You cannot edit a footprint from a component you find via search. For example, search for TL431 and choose the first one in System Components. Now if I wanted to create my own and modify the footprint slightly, there is no obvious way to do this. There is no way to get rid of an empty schematic library "folder". For example I have one under Schematic Lib called "Schottky Diode". Its completely empty and useless and there is no way to delete it. After highlighting a component in the parts browner it automatically assumes I want to place it even though I never press the PLACebutton. Even if I hit cancel, it places the part on the cursor ready to be placed and I need to press ESC to get rid of it. Example: Select Parts, highlight any random part, press cancel. The part is ready to be placed. Why?! Sometimes when I have a PCB that is less than 100mm x 100mm it wants to charge me $5. I wait a few days and its back down to $2. In the parts browser the PCB library is called "Package" in the user menu its called PCB lib. You can calling the same thing two different names in two different places #BugReports#
terryjmyers 2017-12-11 13:29:51 comment 9 0 Bug Reports
Silk screen removal for hand add of solder
On order number 9RnhzQ82k I had left instructions in the order, as well as notes on the documentation layer to leave the silk screen off on a larger power trace so I could add more solder by hand, however this wasn't done. I'm very impressed by everything else, and for my project I'll just add some wire instead so no big deal as everything else was impeccable. But I'm wondering for future projects what I should do to ensure that the silk screen is not added in some places so I hand add solder #PCB#
terryjmyers 2017-06-11 06:43:28 comment 3 0 Circuit Design
3oz copper available?
I'm unable to select 3oz copper weight from fabrication. I've obeyed all of the clearance rules. Is there something else I need to do to get the 3oz option available as per https://easyeda.com/Doc/Tutorial/PCBOrderFAQ#Copper-Weight#PCB#
terryjmyers 2017-05-18 03:09:09 comment 2 0 Circuit Design