Nthing appears on the PCB editor screen.
Hello? I am using EasyEDA pro V2.2.32 Full Online mode. Suddenly, today, nothing appears on the PCB editor screen. Only the PCB part of all projects is not visible on the screen. (It seems to be displayed in Black, but it seems to be selected) (If I select all with Ctrl-A, it is selected in the property) As you can see in the attached screen capture, the circuit diagram, 2D, and 3D are all expressed normally. Only the PCB part is displayed in Black. The Layter and Filter on the right are both set to Common (default). I am confused because this situation suddenly occurred after using it without any problem. What am I doing wrong? #PCB#
[EasyEDA pro] When exporting STEP, the Silk and Track on the top surface are reversed
Hello? I am using V2.2.27. I welcome and appreciate the V2.x upgrade. I am grateful that the STEP Export issue, which was a concern, has been resolved. For now, it is still usable, but I have some suggestions for modifications. First, I would like to thank you for supporting Track and Silk Layer. Previously, I created an image with SVG and processed it as a material, which was very inconvenient. However, the Silk and Track surfaces of the Top Layer seem to be flipped upside down. I am using Fusion 360. If I upload the Top surface in its exported state to Fusion 360, it will be expressed as above. The BOT side appears normal. This looks like it's flipped upside down. If you look at the Silk on the top and the bottom of the Track, it's normal. In the end, it looks like the problem is because the top and bottom are flipped upside down. I tried to mirror copy the Silk and Track on the top surface and swapped them up and down. Now the top side looks normal. I thought it would be a good idea to print the Silk and Track on the top side upside down, even if it is a bit difficult. Finally, I would like to ask if it is possible to implement. I would like the PAD layer to be Fugue. The part that is a bit awkward compared to the original seems to be the pad part. If you compare the part with the arrow and the 3D viewer in EasyEDA, you will be able to tell right away. I think it's great that it's supported up to this point. However, if the PAD part is also processed as an additional layer and processed nicely, I think it will be an even better program. I would like to thank those who worked hard to upgrade, and I look forward to good news. Thank you. #PCB#
Export 3D File does not work.
hello? After the recent update, Export 3D Files of projects that previously worked well do not work. In my opinion, it seems that complex files are not being exported. Things that aren't complicated are still doing well. The 3D view works well on EasyEDA pro. When I try to export it as a STEP file, it stops after a while, depending on the project. Looking at system resources, EasyEDA is barely taking up any resources. I need to export the 3D file for case design, but it stops in the middle, which is frustrating. I am not a beginner user of EasyEDA pro. I have been using EasyEDA pro for over a year and have worked on many files so I don't think I am inexperienced in using it. How can I solve this problem? The captured image below was seen in EasyEDA pro 3D viewer. In this state, if I go to File --> Export --> 3D FIle, it stops after a little progress. The environment I am using is as follows. Windows 11 EasyEDA pro V2.1.57 Same symptoms for both installed version and web version full online mode Please check and resolve the problem. Before this V2.1.57 update, even among the projects where 3D FIle Export worked well, some that were considered a bit complicated are not working. This project, which uses almost similar parts, is normally exported as a 3D STEP file. I can share or send you the project files I worked on if necessary. Can I send it to File --> SaveAs --> Project Save AS (Local) with the extension xxx.epro? Before the recent update, the same project file was exported as a 3D file and imported into Fusion 360. Now it's stuck in the middle of the process and I can't do anything. A problem occurred where the background screen did not change in the 2D viewer, which was working fine before, and now the 3D file export function, which used to work well, suddenly does not work. When an update is made, a function that wasn't supposed to work or needs to be changed, but it's really embarrassing when a function that works doesn't work like this. #PCB#
How to wire at 45 degrees in EasyEDA pro Schematic?
hello? I am using EasyEDA pro V2.1.51. Schematic While drawing a circuit diagram, I am unable to find a way to draw a wire at an angle. Since it can only go up to 90 degrees, it cannot express 45 degrees or free angles. Please tell me how to wire at 45 degrees as shown in the red box in the attached image. #Schematic#
PCB 2D Viewer background color and Annotate Designator problems
hello? I am using EasyEDA Pro V2.1.51. After a recent update, the background color does not change in the PCB viewer. When you select a color, it changes temporarily, but when the mouse moves to the viewer screen, it changes to black. It's not a big problem, but it's inconvenient because you can only see it in black. The other is the Annotate Designator problem in the schematic Design Menu. I used one part by making it into two parts. Three Parts U1.1, U2.1, and U3.1 are placed on one page. On another page, I placed three parts: U1.2, U2.2, and U3.2 Part2. When I copy, the numbers get messed up and when I renumber, the renumber function on the back page doesn't work. Not Part 2 of U1, U2, U3 U4, U5, U6 are assigned new numbers. I'm manually changing about 90 components in the keyboard circuit because I don't have a solution right now. If it consists of multiple parts and the parts are divided on different pages, please check whether the renumber function is working properly and solve the problem. #PCB#
I cannot import 3D Model in EasyEDA pro desktop version.
I cannot import STEP files from the "New 3D Model" menu in EasyEDA pro desktop version. I'm using the desktop version. This has been a problem since a recent update. I exported it as a STEP file from Fusion 360 as I have done so far. I can't import in EasyEDA pro desktop version. The situation is as follows. New 3D Model --> Select File --> Nothing appears in the Model list. When you press Save, “Please select file” appears. The file names are all in English and are simple character names such as ESP32H.step. However, when I run the same file in the web version, it is read and imported without a problem. So now I only import the 3D model from the web version and do the rest from the desktop version. However, I am going through a very uncomfortable situation. Please provide a solution to this problem. Also, if I use Korean in the circuit diagram, the output does not work well. If I change the first letter to English, it sometimes displays, but when I export it as PDF, it doesn't show up. We would appreciate it if you could check the multilingual support issue. It does not appear in the Model List in the desktop version. If I use the same file in the web version in the same way, it appears in the Model List and is imported normally. #BugReports#
Diameter of the tool for machining square holes
hello? I'm trying to make a 15x15mm square hole. What diameter does JLCPCB use when routing by CNC? I want to insert a dogbone or a T-bone because of the corner curvature. Please tell us the diameter of the tools used by JLCPCB. #PCB#