SIM800C GSM Antenna Interface schematic on easyeda.com
Hi all, See this schematic: https://easyeda.com/editor#id=!6f31c3c0b78e4b6fa1d8941a04de3d70 The RF/GSM antenna will be connected to the RF connector. What is that GSM Antenna symbol (and what's used for there)? #Schematic#
R800C with blue pill schematic
Hi all, Seemingly my schematic is done (image below). I appreciate any point you mention to assure me it's all correct. #Schematic#
My R800C schematic
Hi all, Inspired by this SIM800C schematic I designed my R800C design like below to work with a STM32F103C8T6 MCU. Are the RF and power supply parts correct? I use Kicad 9.0.7 for the schematic and PCB design. #Project#
STM32F103C8T6 and R800C schematic
Hi all, Using this tut , this schematic , HTU2D datasheet and SIM800C_Hardware_Design_V1.05 (as well as SIM800C&R800C Compatible Design), I designed the schematic below which cotains STM32F103C8T6, R800C, HTU21D sensor and sim card holder. I chose R800C rather than SIM800C because I only need SMS and calling not bluetooth. Also R800C is newer/more modern. Do you spot any issue or have any cooment regarding it? @Markus_ee In the next posts, I will also publish my PCB design for that. #Project#
The order of the Zener diode and caps from the power supply to VBAT
Hi all, The question is about this schematic and the correct order of the Zener diode and caps from the power supply to VBAT. In SIM800C&R800C Compatible Design we have: Also, SIM800C_Hardware_Design_V1.05 says "The correct flow from source to VBAT pin should go though Zener diode then huge capacitor;" on pg 39 which matches the above circuit But the schematic on easyeda.com puts the zener diode close to the VBAT instead of the power supply. Shouldn't I use that circuit for the SIM? Am rather confused. #Project#
SIM800C correct schematic
Hi all, Found this SIM800C schematic 1- Do you think it's a correct schematic for SIM800C? Then edited/simplified that to my_schematic image below since I only need voice call, send/receive SMS with a net LED and no microphone/speaker. 2- Any issue with my_schematic? #Project#