Parallel mid-speed interface
Hi, I need to connect my thermal camera's output to something which can feed the data to PC in real time. The interface is 13.5 MHz, 16 bits data and few additional bits. Source synchronous clock. This would be easy with e.g. an FPGA and gigabit ethernet. But I try to have the first prototype easily buildable, so looking for other solution suggestions. USB 2.0 should be fast enough too. Is there any uC in JLCPCB smt service which is adept to do this? Any other ways for quick prototyping? -Topi #Skill#
JLCPCB now has through hole assembly service
Hi, JLCPCB has added one more great service to their offering, some through hole mounted components can be soldered alongside SMT process. Excellent quality on SMT this time. Minor THD issue is that those combicon connectors are not soldered to be so straight. -Topi #PCB#
PCB file to save via grid parameters
Hi, Is it possible to get feature which saves via grid parameters (diameters & spacings) to CopperArea. So that when I open the PCB file later, I don't have to enter them manually (and try to remember what values I used). -Topi #FeatureRequests#
Option to generate manufacturing files in single zip file
Hi, If the EasyEda had an feature to combine all manufacturing files (Gerber + BOM + pick&place) to single file, and if JLCPCB would support this file format, it would make the life easier for those ordering SMT service from JLCPCB. -Topi #FeatureRequests#
JLCPCB SMT service library - errors
Hi, Is there a policy within JLCPCB/EasyEda that the components in "JLCPCB Assembled" should be ready-for-production, i.e. verified to match the assembly process? Using the library, yielded to these errors. All of the components are straight from the official library. Where can I find the meaning of these warnings? Also the consistency of used footprints raises question: E.g. U12 and U11 are using a different footprint (TO-252-2_L6.5-W6.1-P4.58-LS10.0-TL vs TO-252-2_L6.5-W6.1-P4.58-LS10.0-BR). Both components are in same package (TO-252-2)\, but the library footprint is different. Why is that? -Topi #PCB#
automatic via grid - fine tuning parameters
Hi, The copper area (E) has a tool to place via on predefined grid. Two ideas: 1. User had an ability to state the exact coordinates of first via. Now, if I enter 1mm x 1mm via grid, the vias has center point of e.g. (xx.308, xx.223). The decimal part depends on the via diameter, and the area border coordinates. So this screen would have X-start and Y-start. 2. If the via grid inside one area is not continuous (e.g. routing in way)\, the coordinates might jump to another offset (xx.567\, xx.112). It would be nice, if the coordinate of every prospective via would be: Xvia = Xoffset + N*Xspacing. (N being an integer, and same for Y). Now here The vias on left side are on 1mm grid, but the vias on the right side are not. Br, -Topi #FeatureRequests#