Import changes removes manual added footprints
I've manually added some footprints to my PCB. Now, after small change in my schematic, I imported the change in my PCB. It updates the changes properly, but it removes the manually added footprints. Is there a way to selectivly incorporate the changes? (And thus deselect the unwanted changes..) #PCB#
Rectangular holes, complying JLCPCB rules (in EasyEda std)
This topic has been addressed in this forum a few times, but I'm still not sure what the correct way is to make rectangular holes in EasyEda (std). I need such a hole, 10.4mm x 14mm, at an angle of 45 degr as shown here in the 2D photo view. . I created a solid region in the document layer, edited the points to the exact coordinates, and set type to "Board Cutout", as explained in the documentation. My concern is that this hole has squared corners, but JLCPCB says: "Rectangular holes and slots without rounded corners are not supported." Question is: will JLCPCB reject my project, or will it produce the cutout with correct sizes but with rounded corners. Or do I need to create the solid region with rounded corners? (Then the question would be: how??) #PCB#
rename prefix of multi-part component
How can I change/rename the prefix of a mult-part in one action? I have for instance U1.2, U1.2, U1.3 etc. Want to change to U9.1, U9.2, U9.3 etc. Only possible way is to change the prefix for all 5 sub-parts individually of the component. _Wim_ #Schematic#
Setting components to NOT-PLACED
Is there a easy/recommend way to set components to not-placed? I like to keep all part- and custom attributes of the component, visible in schematic and PCB, but it should be excluded from the BOM, and marked in the schematic as NP: not-placed. I manage this now by editing the comment custom attribute, and add text "NP" to the part in the schematic. But this is not very handy, and prone to errors. It would be nice to be able to set a part to NP by a click and/or shortcut key. (and be able to revert back to placed). And that it is indicated on the schematic as NP, and omitted from the BOM. _Wim_ #FeatureRequests#
Library part CSD16340Q3, causes DRC errors
Library part CSD16340Q3, causes DRC errors, even with track width & clearance set to 1 mil. The part uses footprint "SON-8_3.3X3.3MM", The footprint is created by LCSC, so assumingly to be OK.. I put a simple test on https://easyeda.com/wim.bloemendal/test Am I doing somwthing wrong or is it a bug? #BugReports#
Dragging seemlingy doesn't move all of part, but after zoom-in/zoom-out it is OK
Hi, If I move a part with left-click, not all of the part is moved. Although it appears that way. When I zoom-in and zoom-out again, it is OK. A bit annoying. Do I have some setting wrong? Or what? _Wim_ #BugReports#