asdasdasd
What's going on with this solder pad?
If i move it slightly to the left the hole jumps. It's the pad labelled 'OUT'. It's fine here: If I move it 0.1mm to the left, this happens: #PCB#
wraalabs 2020-07-11 09:34:33 comment 5 0 Circuit Design
How to remove items from BOM for Assembly
I'm ordering assembly of a PCB. I'd like for certain components NOT to be included, as I have them already. They are showing in the BOM as supplied by LCSC, but not LCSC Assmbled, so I assume they will be included but not soldered(?) Can I remove these components from the BOM so that they will not be included at all? Thanks. #PCB#
wraalabs 2020-05-21 13:10:00 comment 6 0 PCB
PCB Track Tool Not Drawing Diagonal Lines
The track tool in the PCB editor isn't drawing diagonal lines. Everything is snapping to vertical and horizontal, all right angles. Anyone else having this issue? Is it under construction? Thanks. #PCB#
wraalabs 2020-05-16 05:57:41 comment 2 0 Circuit Design
Unable to export CPL file _ SOLVED!
* I found the (now obvious) solution. You must enter the drop down menu while the PCB screen is open\, not the schematic screen. * I'm trying to export the CPL file for SMT assembly at JLC PCB. As you can see from the image below, the option to do this does not appear where it used to. I exported a CPL file for this project yesterday but messed it up (first timer!) and had to do it again. Thanks for your help. #Schematic#
wraalabs 2020-04-22 09:41:47 comment 1 0 Circuit Design
Ordering PCBs on JLCPCB, Gerber uploaded, site stuck uploading images
I get this message: "Your files have been successfully uploaded. As it may take a few minutes to generate preview images, you can stop waiting and place an order first. It’s possible to check the Gerber viewer later in your File Manager or Order History." However, clicking "Stop waiting" does nothing & I'm unable to place order, cursor becomes red circle with line through it when hovering over "Place Order". Thanks. #PCB#
wraalabs 2020-03-19 11:50:20 comment 5 0 PCB
Copper Area appearing OVER Silk Layers
Hi, Upon creating a copper layer, it is hiding the silk layers as shown below. Remind me how to share the project with you if you need to see it. Many thanks. #PCB#
wraalabs 2019-09-24 08:03:12 comment 2 0 Circuit Design
Unconnected net showing in Design Manager but all nets appear to be connected properly on PCB.
Is this due to a glitch in the designer or am I missing something? Screenshots showing the two layers of the PCB: #PCB#
wraalabs 2019-06-02 16:26:24 comment 3 0 Circuit Design
Copper Area / "Rebuild CopperArea" not working
New copper areas are not automatically filling, and clicking "Rebuild CopperArea" has no effect. Issue seems to have arisen in the last 15 minutes or so, it was working earlier today. Thanks! #PCB#
wraalabs 2019-01-09 16:37:15 comment 0 0 Circuit Design
"Inner board outline" warning
Getting a warning when I try auto-router or place a ground plane. It reads, "Warning: EasyEDA does not allow Inner board outlines to form cutouts..." What does this mean? What are inner board outlines and cutouts? Thanks #PCB#
wraalabs 2018-09-24 08:40:01 comment 2 0 Circuit Design
(APPEARS FIXED) Converting to PCB: Packages verification "can't find the package" for standard components
Edit: Appears to be fixed. I tried to convert to PCB again, only one component showed as "can't find the package", a user contribution with no footprint assigned. * * * As title says, I'm converting my schematic to PCB. Package verification box appears with a list of seemingly all the components used (many of which are standard components from EELib; resistors, capacitors etc). All components are listed as "can't find the package". When I open "check the packages", each component has a PCB footprint assigned to it. Not sure what the problem is? Thanks. #Schematic#
wraalabs 2018-07-27 09:15:18 comment 1 0 Circuit Design
Copper Area Error
I am repeatedly recieving this error: "Copper area conflict: Copper areas in same layer with different net names must not overlap" However, the copper areas are not overlapping, there are great gaps between them now to try to avoid this error but yet it persists. Thanks #BugReports#
wraalabs 2018-05-11 14:26:09 comment 8 0 Bug Reports
Copper Area
The copper area doesn't auto-fill as it used to. It remains an outline when drawn. How do I fill it in? Thanks. #PCB#
wraalabs 2018-03-11 17:39:42 comment 4 0 Circuit Design
Connecting rat lines to PCB pads
I have just created 2 pads using the Pad tool in PCB tools. I wish to connect them to other components/footprints using ratlines, but I can't do this by clicking on them with the Connect Pad to Pad tool. How do I achieve this? #PCB#
wraalabs 2018-01-28 15:46:50 comment 4 0 Circuit Design
Potentiometer component
Would it be possible to have a potentiometer such as RV16AF-41-15R1-B100K where only the solder pads are visible in the PCB layout, therefore I wouldn't have to worry about the yellow outline going over the edge of my PCB? Many thanks #PCB#
wraalabs 2018-01-21 12:04:56 comment 7 0 Circuit Design
How do I move a pcb track onto another layer?
After runnig auto router, is it possible to move a track onto a different layer? #PCB#
wraalabs 2018-01-14 10:59:35 comment 2 0 Circuit Design
Potentiometer?
Is there a potentiometer in the 'Parts' section that would fit one like this: http://www.taydaelectronics.com/b100k-ohm-linear-taper-potentiometer-round-shaft-pc-mount-l.html Thanks. #PCB#
wraalabs 2017-12-04 19:25:26 comment 6 0 Circuit Design