*deleted*
*deleted* #SMT#
Problem with 'Copper Area' tool
BUG Concise problem statement: I found a problem with the Copper Area tool. The fact is that the clearance in the corners of the envelope polygon is always less than that setted, by 0.01-0.02 mm. (See Screenshots). And this is a big problem, because the technological process may not be possible to make a board with a clearance less than certain (if I set a minimum technological gap in the 'copper area'). And I need to remake the board and output new gerber files. Steps to reproduce bug: Using 'copper Area'. Measure the clearance in corners. Profit. :) Expected results: I think that the problem is the insufficient quantization of the curve during the rendering. You can try to increase the radius in the corners to +0.02mm, this is a quick fix for implementation. By the way, it would be nice to make the option for several filling styles for 'Copper Area'. For example: solid, square grid angle 45 (XXXX), square grid angle 90 (++++). (Angle 45 is very necessary.) Browser: Chrome This, of course, can be avoided, if remember and keep in mind all the bugs and features of easyeda, but sometimes you can forget something and, as result, lose time. I found a lot of mistakes, in particular, in scripts. In the future I will write more. #BugReports#
Ratings and comments for components. Caution about bad components.
Feature Request Brief title for your desired feature: Score of usability, Rating of useful How would you like the feature to work? In the component database, there must be a button for rate the component, a button for adding a review or comment. Why is this feature important to you? This function is important for all of us, because we can not blindly trust the components. Why? See below. In addition, the database, especially the user-defined components, execuse me, but, gradually turns into a dump of garbage. Here's what happened: While drawing a new board based on stm32, I took from the database a suitable component for the microcontroller. This component was in the 'System Components' section (even, not in the 'User contribution'). I drew a schematic, traced and manufactured the circuit board, installed and soldered all the components, turned on the power... Overcurrent, as if a short circuit occurred. Having dealt with the reason, I found that this schematic component contained a critical error, reversal of the ADC power supply pins! Here is that component: https://easyeda.com/Mstef/component/STM32f103CBT6-chtrDd8ki With the help of a microscope and a Jedi sword, I was necessary cut the tracks and restore them in the right combination. #FeatureRequests#