LCSC C19632011 MOSFET G/S swapped
I just made boards on JLCPCB and found out that the G and S terminals on the datasheet and footprint are swapped. I had to manually swap and resolder those pins to make my board work, and JLCPCB won't even admit their mistake. Others beware.... This is from the original datasheet https://www.lcsc.com/datasheet/C19632011.pdf I later found the datasheet from a similar part at https://www.aosmd.com/res/datasheets/AO3400A.pdf and hand soldered using these pins and miraculously it worked. Do not trust the datasheets from LCSC and the supplied footprints from EASYEDA! #Component#