Hello,
Not sure if this is the right place for this.
I'd like to report a mismatch on between footprint and 3D model. In 3D View the pins and the holes do not align.
The parts in question are:
31017103 (LCSC# C123212)
31046103 (LCSC# C123213)
Could a fix be released please and thank you.

Hi, I created a PCB in EasyEda and the file for drilling .DRL I can't
load it into FlatCam 8,994. The program gives
me an error that it is not Gerber. I work with EasyEda because I do
projects with NodeMCU and there I found the library for it. Please help ...
Proiect is:
https://easyeda.com/editor#id=fc66fb59f43e4fd1a778fcfc1374b1a8
PDu100 Micro Piezo Driver
Datasheet is below:
https://www.piezodrive.com/wp-content/uploads/2021/01/PDu100-V2-Datasheet-R2.pdf

I want it to look something like this.
///
SAMTEC-SSM-103
I was able to add the "SAMTEC-SSM-105-X-DHJ" from the library however I also need the 103 version which is not listed in the library.

It want it to look something like this.
Hi there,
I have produced a DXF which I am trying to import via this method: https://docs.easyeda.com/en/Import/Import-DXF/index.html
Although the import works and the accuracy is good. The import lines don't form a continuous outline, so only single line entities can be converted to "PCB cutout", see pic, rather than the whole outline which is what I need to make a solid copper region from this imported dxf file. Do you have any suggestions for ".dxf" document standards, and workflows to import continuous geometry so I can convert the whole outline to form a continuous "board cutout"? Or is it somehow possible to join these lines together?
Thank you for your time,
Hugh



See attached image Circled artifacts are NOT in the design on any layers. I noted this in "2D" image but assumed some bug in application as I could not find it in the design stage. Assumed you would not include it in the cards.





