Hi,
i found a tutorial to create nice looking remote transmitter and i stuck. This tutorial is from "How to electronics" by Dejan. I tried to contact him but somehow i cannot leave a comment on his page, it is broken.
here is the link to the projekt where try to recreate from this tutorial: https://easyeda.com/vobuchoff/remotecontroller
1. Problem:
In this tutorial Dejan has 3 versions of Arduino Pro mini. I have somehow 4th version of Arduino Pro mini and pins on this board has different position so i have to recreate it to fit to my Arduino Pro mini.
You can find a screenshot in the comments to this project. So i started to rebuild all the component with EasyEDA.
2. Problem:
I do not understand how to connect 2 capacitors that is shown on the other screenshots.
3. Problem:
i do not understand how to connect "AMS1117 3.3v voltage regulator".
4. Problem:
In this project i made a frame "connector". There is a pin "DTR". I do not know what should i connect with it.
Can somebody show me how to fix all this troubles. Thank you.
#Schematic#Not really sure if this is a bug or not. Perhaps it's just an error in footprint names.
Some parts in the LCSC library (like male and female headers) share a common footprint, but require different 3D models. For example:
Header-Male-2.54_1x5
Header-Female-2.54_1x5
The 3D models for these parts are displayed correctly in the Library parts selector, but render incorrectly in the 3D View.
For background information, I read the the EasyEDA footprint naming conventions document:
https://image.easyeda.com/files/EasyEDA+Footprint+Naming+Rule+Reference.pdf
And I see there are a few references to male and female, but it's not clear to me in general whether M and F are expected to be part of the footprint name.
I also read the section on 3D models in the tutorial:
https://docs.easyeda.com/en/PCB/3D-Model-Manager/index.html
Which describes how to associate a 3D model with a footprint.
I can imagine that perhaps this is a problem with the footprint name, and that both the male and female headers are expected to have different footprint names.
But, they display correctly in the Library parts selector, so some parts of EasyEDA display them correctly, while other parts don't.
Here's how to recreate what I'm seeing:
1. Create a new project
2. Create a new schematic
3. Right click on schematic background and select "Place Component..."
4. Search for a part like header-male-2.54_1x5 in LCSC
5. Note that the 3D model is correct (male header) in third image on right of selector (after schematic symbol and footprint)
6. Place part in schematic
7. Save schematic
8. Select Design -> Convert to PCB
9. When PCB opens\, select View -> 3D View
10. Note that the 3D model is now incorrect and renders as a female header instead of a male header
If this is the expected behavior, and I wanted to work around this, what would be the best approach?
Thanks!
#Bug Reports#https://easyeda.com/james_5180/boat-lights-wo-nodemcu
https://easyeda.com/james_5180/pcb-boat-lights-small
My problem is that my dc converters (AP1509-50SG-13) are supposed to
take 12volt input and output 5volts 2amp utilizing pin 1 for voltage
input and pin 2 for Output
After attaching the headers and power input, I get 12volt to the
input pin 1 but less than 1 volt from pin 2 and all circuits connected to pin2
Hi, I was trying to place an order for a pcb but the Gerber Viewer on JLCPCB didn't work and the dimensions textboxes are empty.
I generated the Gerber directly from EasyEDA: Fabrication->PCB Fabrication File(Gerber)->Order at JLCPCB. But when the file finishes uploading, the dimension text boxes remain empty and if I click on the Gerber Viewer link it says "The new Gerber Viewer doesn't support files upload before July, please re-upload on our quote page to try the new version", but I uploaded it directly from EasyEDA. Also, if I go in the "Analysis Results" tab, it says "Unsupported Gerber files" and "Can not identify the board outline". How do I fix this issue? I already tried to set the board outlines again in the editor, by clicking Tools->Set Board Outline, but it didn't fix the issue.
These are the links to the project:
https://easyeda.com/MyAlexro/arduboy
https://easyeda.com/editor#id=|5b061bbf49a5443095f59906e575f561|cb9367f7c85c42e4bba67093a70bb17a
As you should already know, EasyEDA will switch the simulation engine from Ngspice to LTspice.
I've been using LTspice for many years now and found multiple, very kritical errors/gliches/bugs that should get fixed.
LTspice turned out being quite unstable and glitchy so I'm worried integrating it into EasyEda may also destabilize EasyEda.
The schematics that causes glitches are attached to this project:
https://easyeda.com/Krischna/Everything-wrong-with-LTspice
Tested in this software version:
OS: Windows 8.1
Program: LTspice XVII(x64) Aug 19 2020, 23:59:04 US Pacific
If you login with Google account, it will show the client is not secure, please refer at this post Can't login via Google Accout

Please reset your password to get the password Reset Password
- 1.Hit password reset link above
- 2.enter gmail email address and hit reset, keep track of your new password
- 3.now log in "normally", typing in your gmail address and password, not hitting the "login with Gmail" button.
- 4.this issue is Google blocks other browsers which is using the lower blink core, you can search this issue at Google








