I need some help with the stencil ordering for panelized PCB
A few months ago I've to ask about it JLCPCB support and got next answer:
Q:
Hi! How can I order SMT-Stencil for PCB Panel?
I've uploaded my gerbers (with 1 board 33mm_46mm) and choose Panel By JLCPCB: 3 * 2. If I'll choose SMT-Stencil checkbox I'll get SMT-Stencil for 1 board or for a 3_2 panel?
A:
Thank you so much for your e-mail, but really sorry that we do not help to make it with panel for the stencil, if you want to make it with panel, I'm afraid that you may need to panel it by yourself, thanks!
So I have made the panel in Eagle and export top side stencil according to this instruction https://www.autodesk.com/products/eagle/blog/getting-started-solder-paste-stencils/
Stencil gerber file that I've got I have checked with GERBV viewer and it looks absolutely the same as in Eagle.
I've ZIP this gerber file and upload to stencil ordering form.
But it failed the audit and was deleted from the order.

Any ideas what can be wrong?
Hi,
I've made a PCB with a power module, and i wanna have large tracks for power line. So i used copper area connected to Vin, and then when i made my ground plane everything look good. The copper area from ground plane overlaps well the copper area of Vin in the editor. Even in PhotoView it was just as expected.
The image below is the bottom side of my board seen on the editor on easyeda and the 3 copper area for power have red writting on it (A,B,C).

Then, i decided to export my board in gerber files. I ordered it on JLCPCB for around 30€ and the 3 copper areas just vanished.

So i checked the file "gerber_BottomLayer.gbl" using Online Gerber Viewer (http://www.gerber-viewer.com/) and the copper area are missing.

I'm a bit disappointed. How can i make it work in easyeda ? Is it a known bug?
Regards,
Nathan
#Bug Reports#After updating to the latest version, I edited my old PCB layout and rebuilt a copper area to find out that there is some kind of inversion near cutout region. This is a link to the project https://easyeda.com/top29278/test_pcb_issue.


Hello,
I am trying to make a PCB layout which has components on the front and back layer. I want to connect these components with 'vias'.
When I place a via into the layout, I can connect a track to it, but I can not connect that trace to a component. I have also tried to use the "Connect pad to pad" tool, but I don't think that is necessary for using vias.
I have a screen recording of this here: https://youtu.be/6id-EVxvbhk
A copy of my project can be found here: https://easyeda.com/editor#id=ffaab58491294a3280552b723f0c2dec
Am I forgetting something? I have also tried it with other public PCB layouts on easyeda, but I don't have any problem connecting tracks to vias with them.
Thanks in advance.
Robin Jansen
#PCB#Hello, I am using latest version of Easy EDA, and local Auto-router V0.7.
When I have mounting holes on my PCB, auto router cannot see them, and routes through the hole! Whoops!
Video here showing the problem: https://youtu.be/0m8J_Y0y0AM
(the video above is a private video. You can only view it from the link here on this page. You cannot search for it on YouTube).
Regards
Mark
#Bug Reports#


