Hi,
I'm having a problem and can't find a satisfatory solution: I need to put decoupling capacitors as close as possible to the respective IC. I can route it manually and let the Auto Route do the rest, but there is no way to ignore just these tracks, only the whole VCC and GND nets. I would not want to route manually all the VCC and GND nets, just the connections between these capacitors and the VCC/GND pins of the ICs.
The issue can be ssen in this project (public):
https://easyeda.com/editor#id=e10ed52966554c5d9040af2ad9bc523e|1fce3159a76f46c9ab0e82f0adebe7c5|6ff0859f7afd4b4690d09f2a2a8a5092|28231774315641c088df6f349df1db8e|5cbb1df4d5cd42d88d282e1706a7b9e1|21357cff8a51414da2e01ab8b7f39d3c
For example the C1 and U1.
Any idea?
#PCB#made a simple 2 channel comparator and it does not simulate, the error is node c1_2
spice log: http://dpaste.com/3SKRKYA
comparator: https://easyeda.com/editor#id=|fb7343d751744b1fadc2509fc6e025f9
I even didnt use net ports for the rails still didnt simulate.
#Simulation#The boards I received have Multi-Layer holes where BottomLayer only was specified. This caused many shorts on the boards. The boards are not usable.
Order #W2018081295092
Order Number:Y8-2400096A
You can see the problem on all holes for part U1. The holes are specified to be BottomLayer, but the holes are Multi-Layer and connect to the top layer ground plane.
Please look at the board layout.
Can you help with this problem?
Thank you
Bob





