1n4002 model

can anyone help me
i am trying to use diode 1n4002 in my circuit but easy eda cannot simulate it. here the result of the simulation.


Circuit: good* no system model for 1n4002-e3/54, you can create a model by yourself

Error on line 7 : d6 0 volprobe2 1n4002-e3/54
Unable to find definition of model 1n4002 - default assumed

unknown parameter (-e3)
Error on line 8 : d5 volprobe2 c1_1 1n4002-e3/54
Unable to find definition of model 1n4002 - default assumed

unknown parameter (-e3)
Error on line 9 : d4 0 0 1n4002-e3/54
Unable to find definition of model 1n4002 - default assumed

unknown parameter (-e3)
Error on line 10 : d3 0 v1_1 1n4002-e3/54
Unable to find definition of model 1n4002 - default assumed

unknown parameter (-e3)
Error on line 11 : d2 v1_1 volprobe2 1n4002-e3/54
Unable to find definition of model 1n4002 - default assumed

unknown parameter (-e3)

errors/warnings in your design, please fix them if you need

errors/warnings in your design, please fix them if you need.
Doing analysis at TEMP = 27.000000 and TNOM = 27.000000

Warning: v1: no DC value, transient time 0 value used
Warning: singular matrix: check nodes u1_3 and u1_3

Note: Starting dynamic gmin stepping
Note: One successful gmin step
Note: One successful gmin step
Note: One successful gmin step
Note: One successful gmin step
Note: One successful gmin step
Note: One successful gmin step
Note: One successful gmin step
Note: One successful gmin step
Note: One successful gmin step
Note: One successful gmin step
Note: One successful gmin step
Warning: singular matrix: check nodes u1_3 and u1_3

Warning: Dynamic gmin stepping failed
Note: Starting source stepping
Warning: singular matrix: check nodes u1_3 and u1_3

Note: One successful gmin step
Note: One successful gmin step
Note: One successful gmin step
Note: One successful gmin step
Note: One successful gmin step
Note: One successful gmin step
Note: One successful gmin step
Note: One successful gmin step
Note: One successful gmin step
Note: One successful gmin step
Note: One successful gmin step
Note: One successful source step
Warning: singular matrix: check nodes u1_3 and u1_3

Warning: singular matrix: check nodes u1_3 and u1_3

Warning: source stepping failed

Transient solution failed -

Last Node Voltages

Node Last Voltage Previous Iter


v1_1 0 6.17217e-90
volprobe2 -1.59638e-77 -2.10731e-89
c1_1 6.61243e-78 8.72877e-90
u1_3 0 0
v1#branch 4.67569e-90 0

doAnalyses: iteration limit reached

tran simulation(s) aborted
Error(parse.c--checkvalid): volprobe2: no such vector.
ngspice-26 done


i tried to change 1n4002 from easy eda itself, from user contribution, and from ONsemi spice2 and spice3 model but non works. can anyone tell me what should i do. thanks before for all of you

#General Discuss#
Others
BI-source bug ? ngspice bug ? Or what ???

BUG

Concise problem statement:

Unexpected simulation aborts.

There is no faulty circuit design.

Steps to reproduce bug:

https://easyeda.com/editor#id=fcb0d2315a044eb0a4d609b1a5eedaa6

Schematic "Test 1" gives the desired results, circuits work correctly.

https://easyeda.com/editor#id=77dc8b3144534ff09f450e21ae40fd90

Schematic "Test 2" works correctly, both red framed BV-sources give the desired results.

https://easyeda.com/editor#id=bf3c01ee128a4aa9af9bda67105a261c

Schematic "Test 3" works correctly, red framed circuit gives desired results.

https://easyeda.com/editor#id=67721689ede44830863408976b4de953

Schematic "Test 4" works correctly, red framed circuit gives desired results.

https://easyeda.com/editor#id=ad8ce328fc994cfabf12a9eb0c677bf0

Schematic "Test 5" aborts simulation, though it had already worked correctly and given desired results.

https://easyeda.com/editor#id=3fa197de5c574007b79632648d9e00bd

Schematic "Test 6" aborts simulation, though it had already worked correctly and given desired results.

Browser:

Up-to-date FireFox

Statement:

It is extremely hard to understand why a simulation aborts which had worked correctly before, and no changes were made to the circuit layout.

Why I need these circuits working just as correctly as they already did before:

About two years ago I made a very small and simple modification of the electric charging system at my 1974 BMW motorbike which results in a fundamental improvement of battery charging.

During these two years the reliabilty of my modification and its impact on all other components of the electrical system were heavily tested under all the hard circumstances of daily driving.

Now I'm working on a detailled documentation about the differences in the behaviour of the regulators work and the consequences for the rotor current between a serial and a modified charging system.

All of this work is for the benefit of thousands of other enthusiasts all over this planet who keep these old BMW motorbikes alive and running.

Once my documentation is perfect and finished it will be available for free at the best of all places:

http://forum.2-ventiler.de/vbboard/forum.php

Scroll down this page just to "DB-Literatur" and you can see a picture of my bike.

Somewhere in Finland, far north of the polar circle...

I really hope someone gets this bug fixed.

Thank you all in advance,
Tommy

#Bug Reports#
Bug Reports