Problem parsing a pasted-in edited TL081EE subckt?
                  **BUG**

        Concise problem statement:

Running a TL081EE simulation with a pasted-in edited copy of the TL081EE subckt is broken.

Pasting in and editing a copy of the TL081EE and other in-house opamp or comparator subckts used to work.

Please see:

https://easyeda.com/editor#id=B42omkh1n

Steps to reproduce the problem.

1) Draw a schematic with the 5 pin Opamp and change the part name to TL081EE;

2) Copy the subckt for the TL081EE from the netlist for this schematic;

3) Paste it into this schematic;

4) Change the name of the subckt to make it different from TL081EE;

5) Paste in a copy of the LM108 netlist from:

https://easyeda.com/example/LM108_using_a_pasted_in_subckt-afLFztL3X

and set it to "spice";

6) With the pasted-in TL081EE_edited subckt set as "comment", do:

Ctrl+R then select "Transient" then click "Run" to run a time domain simulation.

The sim runs OK.

7) With the pasted-in TL081EE_edited subckt netlist on the right set as "spice", do:

Ctrl+R then select "Transient" then click "Run" to run a time domain simulation.

The sim does not run and the simulation results window shows:

***********************************************************

Circuit: untitled

Doing analysis at TEMP = 27.000000 and TNOM = 27.000000

doAnalyses: out of memory

tran simulation(s) aborted
ngspice-26 done

***********************************************************

Doing:

Super Menu > Miscellaneous > Netlist for Document > Spice...

shows and empty netlist:

***********************************************************

New Schematic

.param pi = 3.141593
.func LIMIT(x, y, z) {min(max(x, min(y, z)), max(z, y))}
.func PWR(x,a) {(MAX(ABS(x), 1e-313))**a}
.func PWRS(x,a) {sgn(x) * PWR(x,a)}
.func stp(x) {u(x)}
.func log10(x) {ln(x)/ln(10)}
.func SQRT(x) {(MAX(x, 1e-313))**0.5}
.func INT(x) {sgn(x)*floor(ABS(x))}
.func URAMP(x) {max(x,0)}
.func POW(x,a) 
+ {(((a-(int(a)))==0)||(sgn(x)>=0))*( max(exp(ln(uramp(x))*a),0) + 
+ (2*(0.5-ABS((int(a))-2*int(a/2))))*max(exp(ln(uramp(-1*x))*a),0) )}

.control

quit
.endc

.END 

***********************************************************

The LM108 netlist shows that this is not a general problem with all pasted-in subckts.

The problem seems to be something to do with the copied and pasted version of the TL081EE subckt.

  • Pasting in and editing a copy of the TL081EE and other in-house opamp or comparator subckts used to work.

Has there been a change to the way some character or string in the schematic editor that now breaks schematic parsing of the pasted in netlist?

Browser: Chrome Version 45.0.2454.85 m and Firefox 40.0.3 in Kubuntu 12.04 LTS and Win7 Pro.

#Bug Reports#
Bug Reports