Please add the symbol for ELECTRET_MIC_EE to the EasyEDA Libs with user adjustable lf, hf and Sens_dBV values in the Properties panel.
lf represents the low frequency -3dB rolloff in Hz;
hf represents the high frequency -3dB rolloff in Hz;
Sens_dBV represents the microphone sensitivity in dBV.
Default values are:
lf = 20
hf = 20k
Sens_dBV = -42
The spice model for ELECTRET_MIC_EE is in the library but does not yet have the correct syntax to accept parameters via the Properties panel.
- This model is demonstrated in:
https://easyeda.com/file_view_Electret-microphone-model-test-jig_7nhbtL3le.htm
and:
#Feature Requests#https://easyeda.com/file_view_Sound-operated-flash-02_gwu0hztL3.htm
Please add the symbol for LDREE to the EasyEDA Libs with user adjustable Rmin, Rmax and tc values in the Properties panel.
Rmin represents the resistance in Ohms of the LDR when the Vlight_level input = 1V, i.e. maximum illumination;
Rmax represents the resistance in Ohms of the LDR when the Vlight_level input = 0V, i.e. total darkness.
tc represents the time constant of the LDR in s.
Default values are:
Rmin = 100
Rmax = 1Meg
tc = 100m
The spice model for LDREE is in the library but does not yet have the correct syntax to accept parameters via the Properties panel.
- There are demonstration simulations here:
#Feature Requests#https://easyeda.com/file_view_Light-operated-switch_qsKEWewqI.htm
https://easyeda.com/file_view_Dark-operated-switch_fgMsYgye8.htm
Until EasyEDA implements a spice model search tool, I was going to copy the list of all models available in https://easyeda.com/cgi/_Cxphdq/, into a spreadsheet in Google Docs then make it publically available as a webpage.
To reduce the number of models shown on the page, I can list only the devices in each Category but there are 2 problems:
-
If there are more than 100 models in a category then I cannot scroll down to see the entries for >100.
-
For all models that are not in a category in the list of categories then they can only be listed by filtering on All. In this case, there are many more than 100 entries so the problem of (1) applies!
#Feature Requests#Is there a way to make the list show entries beyond 100?