Hello,
One trace is not connecting on the bottom of the board.
It is between R5 and L9, using 2 via's to connect them, and on the schematic I have no errors,
on the PCB editor the only DRC error is that trace that still has the ratline. I have it connected by looking at it,
but with the ratline being there, it's not connected in the Gerber File. I have done several via connections like this, this one won't take!
Help! I need to finish this, and the only hold-up I'm aware of is this trace.
If anyone sees anything else wrong, please, I'm open for suggestions!
Thanks in advance.
-Lisa D

Below is the project link\, the PCB to look at is "ac-dc_pcb for_test_pour"  (there are 2 pcb's)\, Ignore the other PCB\, it's a fallback I plan to delete when done.

https://easyeda.com/editor#id=|0e1962d564f344cf862c6e1508e00e84|41667aa2370b477c9ea03febbc8c405c|c094f3a6b53947aca654c0f97b01f3ed 

#PCB#
#PCB#
Circuit Design

No comments yet. Be the first to comment!