HI,

I can't seem to get around this.

I'm trying to create a footprint for a PCB Edge connector kind of thing on a 4 layer PCB. The connector should allow for either a push on PCB edge connector, or to solder wires directly to the PCB.

So, I create a number of square pads, and want each connector to have connection to innder layers. But I also want to prevent the vias from attracting solder, so solder does not flow into the holes, if the edge connector is soldered by hand or machine.

I found out how to create PADs with offset hole, but still the entire pad is having a soldermask. So, I cant find a solution for this.

I have read elsewhere on this forum, many suggestions, but no real answer to this.

Many suggestions in the forum, suggest the oppsite, to add a soldermask manually. This is not the solution, as I vant to remove the soldermask, but only on the Via's.

It is important that any suggestions are multilayer compatible.

#PCB#
#PCB#
Circuit Design

No comments yet. Be the first to comment!