Since i found the problem "invalid PCB" and i couldn't find any solution in the forum so i decided another way to use other software to help solve the problem on PCB route automatically in EasyEDA. I have no other choice but to use other software, but I can't leave EasyEDA software because some libraries are only available in EasyEDA so I did this
Screenshot (14).png

I see that there is support export files to other software that allows to route the PCB
, so I use the altium software.

Screenshot (16).png
Here are the steps I did when using the altium software to route the PCB:Screenshot (16).png
Select the "No, Export Altium" section
Screenshot (18).png
then download and save in your directory
Screenshot (17).png
Open the Altium Designer software, select File > Open (don't select Open Project) then select the file that you saved from the EasyEDA software
Screenshot (19).png
Once your project is open, select Route > Auto Route > All...
Screenshot (20).png
Then you can directly route your PCB by pressing "Route All" or you can set up the PCB by clicking "Edit Rules ..."
Screenshot (22).png
Here are the results I have
Screenshot (15).png

I hope this helps those of you who have the same problem as me
Regards
-Dzikry

#Skill#
#Skill#
Circuit Design

No comments yet. Be the first to comment!